Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.

This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.

Currently the virDBusAddWatch does

  virEventAddHandle(fd, flags,
                    virDBusWatchCallback,
                    watch, NULL);
  dbus_watch_set_data(watch, info, virDBusWatchFree);

Unfortunately this is racy - since the event loop is in a
different thread, the virDBusWatchCallback method may be
run before we get to calling dbus_watch_set_data. We must
reverse the order of these calls

See https://bugzilla.redhat.com/show_bug.cgi?id=885445Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Starting from commit 2e82c18c in Xen (will be included in Xen 4.4)
both libxl_get_max_cpus() and libxl_get_max_nodes() start returning
a proper libxl error code, in case of failure. This patch fixes
this in the libxl driver.

Note that, although it is now basically impossible for them to return
0, that would, theoretically, still be wrong. Also, checking that the
returned value is '<= 0' makes the code correct for both Xen 4.4 and
Xen 4.3 (and 4.2), and that is why we go for it (rather than
just '< 0').
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

On a system that is enforcing FIPS, most libraries honor the
current mode by default.  Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux.  So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting.  Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).

The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.

http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  1.00 GiB  1.00 GiB

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  2.00 GiB  1.00 GiB

So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  3.00 GiB  2.00 GiB

This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:

	[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate

	[root@localhost ~]# virsh vol-list --pool tmp-pool --details
	 Name      Path                   Type  Capacity  Allocation
	-------------------------------------------------------------
	 tmp-vol  /root/tmp-pool/tmp-vol  file  3.00 GiB  3.00 GiB

Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: NWang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

vmx/vmx.c ignores the transient attribute on the disk xml format. This patch
adds a 1-1 relationship between it and [disk].mode = "independent-nonpersistent".

The other modes are ignored as before. It works in my testing.

https://bugzilla.redhat.com/show_bug.cgi?id=1044023Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The newroot is not mounted as tmpfs, we bind root->src to it.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The event namespace concept is mostly redundant information.
With the re-written dispatcher, the namespace is only used
for equality comparisons between event IDs. This can be solved
by just comparing virClassPtr instances instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of having the object event code have to know about each
type of event and their dispatch functions, associate a dispatch
function with the object instance. The dispatch code can thus be
significantly simplified.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Inject a virNetworkEvent class between virObjectEvent
and virNetworkEventLifecycle to mirror virDomainEvent.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While the public API & wire protocol included the 'detail'
arg for network lifecycle events, the internal event handling
code did not process it. This meant that if a future libvirtd
server starts sending non-0 'detail' args, the current libvirt
client will not process them.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While running objecteventtest, it was found that valgrind pointed out the
following memory leak:

==13464== 5 bytes in 1 blocks are definitely lost in loss record 7 of 134
==13464==    at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==13464==    by 0x341F485E21: strdup (strdup.c:42)
==13464==    by 0x4CAE28F: virStrdup (virstring.c:554)
==13464==    by 0x4CF3CBE: virObjectEventCallbackListAddID (object_event.c:286)
==13464==    by 0x4CF49CA: virObjectEventStateRegisterID (object_event.c:729)
==13464==    by 0x4CF73FE: virDomainEventStateRegisterID (domain_event.c:1424)
==13464==    by 0x4D7358F: testConnectDomainEventRegisterAny (test_driver.c:6032)
==13464==    by 0x4D600C8: virConnectDomainEventRegisterAny (libvirt.c:19128)
==13464==    by 0x402409: testDomainStartStopEvent (objecteventtest.c:232)
==13464==    by 0x403451: virtTestRun (testutils.c:138)
==13464==    by 0x402012: mymain (objecteventtest.c:395)
==13464==    by 0x403AF2: virtTestMain (testutils.c:593)
==13464==

The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We missed a return when virProcessKillPainfully
failed to kill lxc process
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Recent changes to events (commit 8a29ffcf) resulted in new compile
failures on some targets (such as ARM OMAP5):
conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
conf/domain_event.c:1198:30: error: cast increases required alignment of
target type [-Werror=cast-align]
conf/domain_event.c:1314:34: error: cast increases required alignment of
target type [-Werror=cast-align]
cc1: all warnings being treated as errors

The error is due to alignment; the base class is merely aligned
to the worst of 'int' and 'void*', while the child class must
be aligned to a 'long long'.  The solution is to include a
'long long' (and for good measure, a function pointer) in the
base class to ensure correct alignment regardless of what a
child class may add, but to wrap the inclusion in a union so
as to not incur any wasted space.  On a typical x86_64 platform,
the base class remains 16 bytes; on i686, the base class remains
12 bytes; and on the impacted ARM platform, the base class grows
from 12 bytes to 16 bytes due to the increase of alignment from
4 to 8 bytes.

Reported by Michele Paolino and others.

* src/util/virobject.h (_virObject): Use a union to ensure that
subclasses never have stricter alignment than the parent.
* src/util/virobject.c (virObjectNew, virObjectUnref)
(virObjectRef): Adjust clients.
* src/libvirt.c (virConnectRef, virDomainRef, virNetworkRef)
(virInterfaceRef, virStoragePoolRef, virStorageVolRef)
(virNodeDeviceRef, virSecretRef, virStreamRef, virNWFilterRef)
(virDomainSnapshotRef): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal)
(qemuMonitorClose): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

panic device is a device that enables libvirt to receive notification
of guest panic event.
Signed-off-by: NEric Blake <eblake@redhat.com>

For example:
<address type='isa' iobase='0x505' irq='0x1'/>
Signed-off-by: NEric Blake <eblake@redhat.com>

The throttle blkio cgroup will reuse this struct.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

virDomainBlkioDeviceWeightParseXML will be used to parse
the xml element read_bps, write_bps, read_iops, write_iops.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Hitting this should be pretty rare, but at least developers will know
that they are providing a weird event ID. Otherwise for namespace that
are added in the normal way, gcc will raise a warning about unhandled
case in the switch.

Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.

The network events related code goes into its own set of internal
files src/conf/network_event.[ch]

This variable shadows the stat(2) function, which only became visible in
this scope as of commit 9cac8639. Rename the variable so it doesn't
conflict.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

When doing 'virsh vol-dumpxml' on a gluster pool's volume, the
resulting URI incorrectly omitted a slash between hostname and
path:  gluster://192.168.122.206rhsvol1/fedora-19.img

This is fallout from me rebasing earlier versions of my patch
that ended up as commit efee1af5; I had originally played with
always requiring the gluster volume to have a leading slash,
but it was easier to use the gluster API if the gluster volume
name was guaranteed to have no slash.  While I got the URI of
the pool correct, I forgot to fix the URI of a libvirt volume.

* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Use correct starting point
since uri construction requires leading slash.
Signed-off-by: NEric Blake <eblake@redhat.com>

re-mount it again.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

This reverts commit 8355d42d.

After some discussion upstream [1] this patch turns out to be spurious.
It better gets reverted prior to a release.

1: https://www.redhat.com/archives/libvir-list/2013-December/msg00563.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1035955

There's a window when starting a qemu process between fork() and exec()
during which we are doing things that may fail but not tunnelling the
error to the daemon. This is basically all within qemuProcessHook().
So whenever we fail in something, e.g. placing a process onto numa node,
users are left with:

    error: Child quit during startup handshake: Input/output error

while the original error is thrown into the domain log:

    libvirt:  error : internal error: NUMA memory tuning in 'preferred'
    mode only supports single node

Hence, we should read the log file and search for the error message and
report it to users.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Each unique event ID will thus be composed by 1 byte for the namespace
and 1 byte for a namespace-specific ID. The namespace for domain event
needs to be 0 for compatibility reasons.