Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We need to make sure that the chardev is TCP.  Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

qemuDomainSecret{Disk|Hostdev}Prepare has a prototype that checks for
ATTRIBUTE_NONNULL(1) for 'conn'.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Missing the option to set verify-peer to yes
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

qemuProcessPrepareDomain has no need to fetch/unref the cfg, so remove it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.

In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.

A pci-bridge has *almost* the same rules as a legacy PCI endpoint
device for where it can be automatically connected, and until now both
had been considered identical. There is one pairing that is okay when
specifically requested by the user (i.e. manual assignment), but we
want to avoid it when auto-assigning addresses - plugging a pci-bridge
directly into pcie-root (it is cleaner to plug in a dmi-to-pci-bridge,
then plug the pci-bridge into that).

In order to allow that difference, this patch makes a separate
CONNECT_TYPE for pci-bridge, and uses it to restrict auto-assigned
addresses for pci-bridges to be only on pci-root, pci-expander-bus,
dmi-to-pci-bridge, or on another pci-bridge.

NB: As with other discouraged-but-seem-to-work configurations
(e.g. plugging a legacy PCI device into a pcie-root-port) if someone
*really* wants to, they can still force a pci-bridge to be plugged
into pcie-root (by manually specifying its PCI address.)

https://bugzilla.redhat.com/show_bug.cgi?id=1357416

Rather than return a 0 or -1 and the *result string, return just the result
string to the caller.  Alter all the callers to handle the different return.

As a side effect or result of this, it's much clearer that we cannot just
assign the returned string into the scsi_host wwnn, wwpn, and fabric_wwn
fields - rather we should fetch a temporary string, then as long as our
fetch was good, VIR_FREE what may have been there, and STEAL what we just got.
This fixes a memory leak in the virNodeDeviceCreateXML code path through
find_new_device and nodeDeviceLookupSCSIHostByWWN which will continually
call nodeDeviceSysfsGetSCSIHostCaps until the expected wwnn/wwpn is found
in the device object capabilities.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Without them we're keeping <alias/> even for inactive XML.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

As with all other devices, it's not part of 'address'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366108

There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.

Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366505

So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, what we do for vhost-user network is generate the
following part of command line:

-netdev type=vhost-user,id=hostnet0,chardev=charnet0

There's no need for 'type=' it is the default. Drop it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There's no need to reinvent the wheel here. We already have a
function to format virDomainChrSourceDefPtr. It's called
qemuBuildChrChardevStr(). Use that instead of some dummy
virBufferAsprintf().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This alone makes not much sense. But the aim is to reuse this
function in qemuBuildVhostuserCommandLine() where 'nowait' is not
supported for vhost-user devices.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We tend to prevent using 'default' in switches. And it is for a
good reason - control may end up in paths we wouldn't want for
new values. In this specific case, if qemuBuildHostNetStr is
called over VIR_DOMAIN_NET_TYPE_VHOSTUSER it would produce
meaningless output. Fortunately, there no such call yet.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are couple of formatting issues. No functional change
though.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Not every system out there has syslog, that's why we check for it
in our configure script. However, in 640b58ab while fixing
another issue, some variables and functions are called that are
defined only when syslog.h is present. But these function
calls/variables were not guarded by #ifdef-s.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The smbios docs allow any string to be passed and libvirt does not
really do any validation on them. Allow passing any string.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373535

We pass free-form strings from the users to qemu, thus we need escape
commas since they are passed to qemu monitor.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373535

qemuBuildSmbiosBiosStr and qemuBuildSmbiosSystemStr return NULL if
there's nothing to format on the commandline. Reporting errors from
buffer creation doesn't make sense since it would be ignored.

This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Consider the following scenario:

  virsh # freecell --all
      0:       2048 KiB
      1:       4096 KiB
  --------------------
  Total:       6144 KiB

  virsh # freecell 0
  0: 2048 KiB

  virsh # freecell 1
  1: 4096 KiB

And now before this change:

  virsh # freecell 2

After this change:

  virsh # freecell 2
  error: invalid argument: Range exceeds available cells
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We have inclination to calling our loop variables i, j, k, not u.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1369633Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There are two video devices with models without VGA compatibility mode.
They are primary used as secondary video devices, but in some cases it
is required to use them also as primary video devices.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This improves commit 706b5b62 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not.  This is not a case only for arm/aarch64.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu.  Let's check for existence of virtio-vga if we
want to use it.

Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*.  The first two
models are tied together and if virtio video devices is compiled in they
both exist.  However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist.  So we cannot
group all three together.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>