libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Prior to commit id '3d021381' virDomainObjUpdateModificationImpact was
part of virDomainLiveConfigHelperMethod and the *flags if condition
VIR_DOMAIN_AFFECT_CONFIG checked the ->persistent boolean and made the
virDomainObjGetPersistentDef call.

Since the functions were split the ->persistent check is all that remained
and thus could be combined into one if statement.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

in commit 81a110, multiqueue for macvtap is enabled but forget
to support hotplugging enabled
Signed-off-by: NShanzhi Yu <shyu@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1313314Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When SPICE graphics is configured for a domain but we did not ask the
client to switch to the destination, we should not wait for
SPICE_MIGRATE_COMPLETED event (which will never come).

https://bugzilla.redhat.com/show_bug.cgi?id=1151723Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Migration statistics are not available on the destination host and
starting a query job during incoming migration is not allowed. Trying to
do that would result in

    Timed out during operation: cannot acquire state change lock (held
    by remoteDispatchDomainMigratePrepare3Params)

error. We should not even try to start the job.

https://bugzilla.redhat.com/show_bug.cgi?id=1278727Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This functions setups per-domain cpu bandwidth parameters
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This parameter controls the maximum bandwidth to be used
within a period for whole domain.
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

We don't need locks in dispose functions as they can only
be run in one thread for given object.

closeCallback pointer is immutable (set on connection object creation)
and self-locking.

If connect close is fired then following unregister will fail
as we set callback to NULL and thus callback equality checking
will fail.

Callback is set to NULL to make it fired only one time probabaly.
Instead lets use connection equality to NULL to check if callback
is already fired.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

We have reference to connection object in virConnectCloseCallbackData
object thus we have to refcount it. Obviously we have problems
in dispose and call functions. Let's fix it.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Make register and unregister functions return void because
we can check the state of callback object beforehand via
virConnectCloseCallbackDataGetCallback. This can be done
without race conditions if we use higher level locks for registering
and unregistering. The fact they return void simplifies
task of consistent registering/unregistering.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Similarly to the refactors to iothreads and vcpus, move the code that
initializes the emulator thread settings into single function.

This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory.  It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar.  If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=872166

When the login session doesn't have an ssh -X type display agent in
order for libvirtd to run the polkit session authentication, attempts
to run 'virsh -c qemu:///system list' from an unauthorized user (or one
that isn't part of the libvirt /etc/group) will fail with the following
error from libvirtd:

error: authentication unavailable: no polkit agent available to
       authenticate action 'org.libvirt.unix.manage'

In order to handle the local authentication, we will use the new
virPolkitAgentCreate API in order to create a text based authentication
agent for our non readonly session to authenticate with.

The new code will execute in a loop allowing 5 failures to authenticate
before failing out.

With this patch in place, the following occurs:

$ virsh -c qemu:///system list
==== AUTHENTICATING FOR org.libvirt.unix.manage ===
System policy prevents management of local virtualized systems
Authenticating as: Some User (SUser)
Password:
==== AUTHENTICATION COMPLETE ===
 Id    Name                           State
 ----------------------------------------------------
  1     somedomain                     running

$

Introduce virPolkitAgentCreate and virPolkitAgentDestroy

virPolkitAgentCreate will run the polkit pkttyagent image as an asynchronous
command in order to handle the local agent authentication via stdin/stdout.
The code makes use of the pkttyagent --notify-fd mechanism to let it know
when the agent is successfully registered.

virPolkitAgentDestroy will close the command effectively reaping our
child process

When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:

    "error: authentication failed: no agent is available to authenticate"

This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:

    "error: authentication unavailable: no polkit agent available to
            authenticate action 'org.libvirt.unix.manage'"

A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:

"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."

but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c9'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.

After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.

Rename to secretLoadAllConfigs and add the 'driver->configDir' as
a parameter.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This new API will allocate the secret, assign the def pointer, and
insert the secret onto the passed list. Whether that's the temporary
list in loadSecrets which gets loaded into the driver list or driver
list during secretDefineXML.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a temporary helper to search for a specific secret by address
on the list and remove it if it's found. The following patch will
introduce a common allocation and listInsert helper. That means
error paths of the routines calling would need a way to remove the
secret off the list.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This patch removes need for secretBase64Path and secretComputePath. Similar
to the configFile, create an entry for base64File, which will be generated
as the driver->configDir, the UUID value, plus the ".base" suffix. Rather
than generating on the fly, store this in the virSecretObj.

The buildup of the pathname done in loadSecrets where the failure to build
is ignored which is no different than the failure to generate the name
in secretLoadValue which would have been ignored in the failure path
after secretLoad.

This also removes the need for secretComputPath and secretBase64Path.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This patch removes the need for secretXMLPath. Instead save 'path' during
loadSecret as 'configFile'. The secretXMLPath is nothing more than an
open coded virFileBuildPath.  All that code did was concantenate the
driver->configDir, the UUID of the secret, and the ".xml" suffix to form
the configFile name which we now will generate and save instead.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The 'secretLoad' was essentially open coding virFileBuildPath.

Adjust the logic to have the caller build the path and pass it. The net
sum of ignoring the virFileBuildPath failure is the same as before where
the failure to virAsprintf the path would have been ignored anyway in
the secretLoad error path.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>