Implement both commandline support and hotplug by adding the http cookie
handling to 'qemuBlockStorageSourceAttachData' handling functions for
it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU's curl driver requires the cookies concatenated and allows themi to
be passed in via a secret. Prepare the value for the secret and encrypt
it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The http cookies can have potentially sensitive values and thus should
not be leaked into the command line. This means that we'll need to
instantiate a 'secret' object in qemu to pass the value encrypted.

This patch adds infrastructure for storing of the alias in the status
XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow disabling of SSL certificate validation for HTTPS and FTPS drives
in qemu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Upcoming patches will implement the support for sslverify, cookies,
readahead, and timeout properties. Add a test file which will collect
the cases.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Ensure that the new fields are allowed only when -blockdev is used or
when they are in the detected part of the backing chain where qemu will
handle them internally.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There are two last callers of this function. Replace them by
qemuAliasForSecret and delete qemuDomainGetSecretAESAlias.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Originally there was only the secret for authentication so we didn't use
any suffix to tell it apart. With the introduction of encryption we
added a 'luks' suffix for the encryption secrets. Since encryption is
really generic and authentication is not the only secret modify the
aliases for the secrets to better describe what they are used for.

This is possible as we store the disk secrets in the status XML thus
only new machines will use the new secrets.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Replace qemuDomainGetSecretAESAlias by the new function so that we can
reuse qemuDomainSecretAESSetupFromSecret also for setting up other kinds
of objects.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Currently we don't have infrastructure to remember the secret aliases
for hostdevs. Since an upcoming patch is going to change aliases for
the disks, initialize the iscsi hostdevs separately so that we can keep
the alias. At the same time let's use qemuAliasForSecret instead of
qemuDomainGetSecretAESAlias when unplugging the iscsi hostdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In order to be able to change the function generating the alias and thus
also the aliases itself, we must hardcode the old format for the case of
upgrading form libvirt which didn't record them in the status XML yet.

Note that this code path is tested by
'tests/qemustatusxml2xmldata/disk-secinfo-upgrade-in.xml'
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The naming of the variables was tied to what they are used for not what
the alias represents. Since we'll need to use some of the aliases for
another type of secrets fix the name so that it makes sense.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuAliasForSecret is meant as a replacement qemuDomainGetSecretAESAlias
with saner API. The sub-type we are creating the alias for is passed in
as a string rather than the unflexible 'isLuks' boolean.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We need the "$(space)" variable to contain a single whitespace
character. We do this by assigning and then appending an empty
string to the variable. Variable appends get separated by a
single whitespace historically, but GNU make 4.3 introduced a
behaviour regression.

  https://lists.gnu.org/archive/html/bug-make/2020-01/msg00057.html

[quote]
* WARNING: Backward-incompatibility!
  Previously appending using '+=' to an empty variable would
  result in a value starting with a space.  Now the initial
  space is only added if the variable already contains some
  value.  Similarly, appending an empty string does not
  add a trailing space.
[/quote]

This patch tries a new trick to get a single whitespace by
getting make to expand two non-existant variables separated
by a space.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Replace it by a direct call to qemuDomainSecretAESSetupFromSecret.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Split out the lookup of the secret from the secret driver into
qemuDomainSecretAESSetupFromSecret so that we can also instantiate
secret objects in qemu with data from other sources.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than passing in an empty qemuDomainSecretInfoPtr allocate it
in this function and return it. This is done by absorbing the check from
qemuDomainSecretInfoNew and removing the internals of
qemuDomainSecretInfoNew.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use g_autofree for the ciphertext and init vector as they are not
secret and thus don't have to be cleared and use g_new0 to allocate the
iv for parity.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The comment mentioned that the function resets migration params, but
that is not true as of commit eb54cb47Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use g_autofree instead of VIR_FREE and delete the comment mentioning
possible failure to allocate memory.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Using a double pointer prevents the function from being used as the
automatic cleanup function for the given type.

Remove the double pointer use by replacing the calls with
g_clear_pointer which ensures that the pointer is cleared.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use g_new0 to completely avoid the 'cleanup' label.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

POWER hosts does not implement CPU virtualization extensions like
x86 or s390x. Instead, all bare-metal POWER hosts are considered
to be virtualization ready.

For POWER, the validation is done by checking if the virtualization
module kvm_hv is loaded in the host. If not, we should warn the
user about it.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NKashyap Chamarthy <kchamart@redhat.com>

Update the manpage for the 'server-update-tls' command
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWu Qingliang <wuqingliang4@huawei.com>

wire-up virAdmServerUpdateTlsFiles API into virt-admin client.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWu Qingliang <wuqingliang4@huawei.com>

The server needs to use CA certificate, CRL, server certificate/key to
complete the TLS handshake. If these files change, we needed to restart
libvirtd for them to take effect. This API can update the TLS context
*ONLINE* without restarting libvirtd.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWu Qingliang <wuqingliang4@huawei.com>

Prevent the handshake function from reading 'tlsCtxt' while
updating 'tlsCtxt'.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWu Qingliang <wuqingliang4@huawei.com>

Add an API to update server's tls context.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWu Qingliang <wuqingliang4@huawei.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This was only used to pull in virStrerror.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we use g_strerror exclusively, remove this unused
function.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Remove lots of stack-allocated buffers.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

oVirt used a quirk in the pre-blockdev semantics of drive-mirror which
opened the backing chain of the mirror destination only once
'block-job-complete' was called.

Our introduction of blockdev made qemu open the backing chain images
right at the start of the job. This broke oVirt's usage of this API
because they copy the data into the backing chain during the time the
block copy job is running.

Re-introduce late open of the backing chain if qemu allows us to use
blockdev-snapshot on write-only nodes as it can be used to install the
backing chain even for an existing image now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The capability is based on qemu's support of using blockdev-snapshot to
install backing chain also for images which are in use by a block-copy
job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

For a long time we've masked out VIR_DOMAIN_BLOCK_COPY_SHALLOW if
there's no backing chain for the copied disk to simplify the code.

One of the refactors of the block copy code caused that we no longer
update the 'flags' variable just the local copies. This was okay until
in ccd4228a we started storing the job flags in the block job data.

Given that we modify how we call qemu we also should modify @flags so
that the correct value is recorded in the block job data.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>