This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1020135

If networkAllocateActualDevice() had failed due to a pool of hostdev
or direct devices being depleted, the calling function could still
call networkReleaseActualDevice() as part of its cleanup, and that
function would then unconditionally decrement the connections count
for the network, even though it hadn't been incremented (due to
failure of allocate). This *was* necessary because the .actual member
of the netdef was allocated with a "lazy" algorithm, only being
created if there was a need to store data there (e.g. if a device was
allocated from a pool, or bandwidth was allocated for the device), so
there was no simple way for networkReleaseActualDevice() to tell if
something really had been allocated (i.e. if "connections++" had been
executed).

This patch changes networkAllocateDevice() to *always* allocate an
actual device for any netdef of type='network', even if it isn't
needed for any other reason. This has no ill effects anywhere else in
the code (except for using a small amount of memory), and
networkReleaseActualDevice() can then determine if there was a
previous successful allocate by checking for .actual != NULL (if not,
it skips the "connections--").

This addition, however, requires some refactoring to be done.  First of
all, to match the best practice we should detach the device prior
resetting it. That's why testVirPCIDeviceDetach is detaching all devices
within 0000:00:01.0 and 0000:00:03.0 range. Then, the brand new test
will reset the 0000:00:02.0 device, so the last testVirPCIDeviceReattach
can reattach all the devices back.

In order to perform a PCI device reset, the dummy config file is not
sufficient anymore and must be replaced with real PCI config (binary
mess). Such config files are to be stored under tests/virpcitestdata/
and ought to have '.config' suffix.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Needed for architectures that don't use gcc atomic ops but pthread. This
fixes the armel build that otherwise breaks like:

 CCLD     virt-login-shell
 ../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virClassNew':
 /«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:150: undefined reference to `virAtomicLock'
 ../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectNew':
 /«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:202: undefined reference to `virAtomicLock'
 ../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectUnref':
 /«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:274: undefined reference to `virAtomicLock'
 ../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectRef':
 /«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:295: undefined reference to `virAtomicLock'
 collect2: error: ld returned 1 exit status

See https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=armel&ver=1.1.4-1&stamp=1383588268

In the pci_driver_new function it is possible to set a list of
<vendor:device> IDs that the driver knows. These IDs are passed as
variable arguments and are processed  the usual way using va_start() and
va_arg(). However, after all arguments has been processed, we should
call va_end() what we aren't currently doing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A qcow2 file with a backing file of 'gluster://host/vol/file' should
not try to look for a directory named './gluster:/' in the file system.

* src/util/virstoragefile.c (virBackingStoreIsFile): Broaden check
to include all protocols.
Signed-off-by: NEric Blake <eblake@redhat.com>

Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2])
'-no-kvm-pit-reinjection' has been deprecated.
Use -global kvm-pit.lost_tick_policy=discard instead.

https://bugzilla.redhat.com/show_bug.cgi?id=978719

[1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39
[2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f

Coverity complains that the call to virPCIDeviceDetach() in
qemuPrepareHostdevPCIDevices() doesn't check status return like
other calls.  Seems this just was lurking until a recent change
to this module resulted in Coverity looking harder and finding
the issue.  Introduced by 'a4efb2e3' when function was called
'pciReAttachDevice()'

Just added a ignore_value() since it doesn't appear to matter
if the call fails since we're on a failure path already.

Currently the LXC container tries to skip selinux/securityfs
mounts if the directory does not exist in the filesystem,
or if SELinux is disabled.

The former check is flawed because the /sys/fs/selinux
or /sys/kernel/securityfs directories may exist in sysfs
even if the mount type is disabled. Instead of just doing
an access() check, use an virFileIsMounted() to see if
the FS is actually present in the host OS. This also
avoids the need to check is_selinux_enabled().
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some mounts must be skipped if running inside a user namespace,
since the kernel forbids their use. Instead of strcmp'ing the
filesystem type in the body of the loop, set an explicit flag
in the lxcBasicMounts table.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the lxcBasicMounts array has separate entries for
most mounts, to reflect that we must do a separate mount
operation to make mounts read-only. Remove the duplicate
entries and instead set the MS_RDONLY flag against the main
entry. Then change lxcContainerMountBasicFS to look for the
MS_RDONLY flag, mask it out & do a separate bind mount.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The 'srcpath' variable is initialized from 'mnt->src' and never
changed thereafter. Some places continue to use 'mnt->src' and
others use 'srcpath'. Remove the pointless 'srcpath' variable
and use 'mnt->src' everywhere.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virLXCBasicMountInfo struct contains a 'char *opts'
field passed onto the mount() syscall. Every entry in the
list sets this to NULL though, so it can be removed to
simplify life.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a function for efficiently checking if a path is a filesystem
mount point.

NB will not work for bind mounts, only true filesystem mounts.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This just introduces the test for bug fixed in df4283a5.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1018897

If a PCI deivce is not binded to any driver (e.g. there's yet no PCI
driver in the linux kernel) but still users want to passthru the device
we fail the whole operation as we fail to resolve the 'driver' link
under the PCI device sysfs tree. Obviously, this is not a fatal error
and it shouldn't be error at all.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This test will reattach the PCI device detached in the previous test.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This commit introduces yet another test under virpcitest:
virPCIDeviceDetach. However, in order to be able to do this, the
virpcimock needs to be extended to model the kernel behavior on PCI
device binding and unbinding (create 'driver' symlinks under the device
tree, check for device ID in driver's ID table, etc.)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Among with this test introduce virpcimock as we need to mock some
syscalls, e.g. redirect open() of a file under /sys/bus/pci to a
stub sysfs tree.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Until now the map was loaded from the XML definition file every time a
operation on the flags was requested. With the introduciton of one shot
initializers we can store the definition forever (as it will never
change) instead of parsing it over and over again.

This makes virCPUx86DataAddCPUID, virCPUx86DataFree, and
virCPUx86MakeData available for direct usage outside of cpu driver in
tests and the new qemu monitor that will request the actual CPU
definition from a running qemu instance.

Now that all libnuma functions used by libvirt are wrapped in virNuma we
can remove the dependancy from nodeinfo.

The function was called in a single place only and was reporting errors
that were later ignored. Use the virNumaGetNodeMemory helper to get the
size of the memory in the NUMA node and remove the helper

Avoid necessary checks for the numa library with this helper.

linuxNodeGetCPUStats() and linuxNodeGetMemoryStats() are static and
don't need a forward declaration.

All functions from libnuma must be protected with ifdefs. Avoid this by
using our own wrapper.

* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localizations from transifex and regenerate

aa0f0992 introduced a strict error checking for getsockopt and it
revealed that getting a peer credential of a socket on FreeBSD
didn't work. Libvirtd hits the error:
  error : virNetSocketGetUNIXIdentity:1198 : Failed to get valid
  client socket identity groups

SOL_SOCKET (0xffff) was used as a level of getsockopt for
LOCAL_PEERCRED, however, it was wrong. 0 is correct as well as
Mac OS X.

So for LOCAL_PEERCRED our options are SOL_LOCAL (if defined) or
0 on Mac OS X and FreeBSD. According to the fact, the patch
simplifies the code by removing ifdef __APPLE__.

I tested the patch on FreeBSD 8.4, 9.2 and 10.0-BETA1.
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>

With Mac OS X 10.9, xdrproc_t is no longer defined as:

typedef bool_t (*xdrproc_t)(XDR *, ...);

but instead as:

typdef bool_t (*xdrproc_t)(XDR *, void *, unsigned int);

For reference, Linux systems typically define it as:

typedef bool_t (*xdrproc_t)(XDR *, void *, ...);

The rationale explained in the header is that using a vararg is
incorrect and has a potential to change the ABI slightly do to compiler
optimizations taken and the undefined behavior. They decided
to specify the exact number of parameters and for compatibility with old
code decided to make the signature require 3 arguments. The third
argument is ignored for cases that its not used and its recommended to
supply a 0.

Rather than casting the virBitmap pointer to uint8_t* and then using
the structure contents as a byte array, use the virBitmap API to determine
the bitmap size and test each bit.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>

This reverts commit 394d6e0a.
The real problem is accessing the virtBitmap structure as a byte
array, which was correctly identified and fixed by Jeremy Fitzhardinge

https://www.redhat.com/archives/libvir-list/2013-October/msg01257.html

in recently xen commit: 7051d5c8, there is a api changes in
libxl_domain_create_restore.
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date:   Thu Oct 10 12:23:10 2013 +0100

    tools/migrate: Fix regression when migrating from older version of Xen

use the macro LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS in libxl.h
in order to make libvirt could compile with old and new xen.

the params checkpointed_stream is useful if libvirt libxl driver
support migration. for new, set it as zero.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

When starting a transient VM the first thing done is to check
for duplicates. The check looks if there are any running VMs
with the matching name/uuid. It explicitly allows there to
be inactive VMs, so that a persistent VM can be temporarily
booted with a different config.

There is a race condition, however, where 2 or more clients
try to create the same transient VM. The first client will
cause a virDomainObjPtr to be added to the domain list, and
it is inactive at this stage. The second client may then
come along and see this inactive VM, and mistake it for a
persistent VM.

If the first VM fails to start its transient guest for any
reason, then it'll remove the virDomainObjPtr from the list.
The second client now has a virDomainObjPtr that it can try
to boot, which libvirt no longer has a record of. The result
can be a running QEMU process that is orphaned.

It was also, however, possible for the virDomainObjPtr to be
completely free'd which will cause libvirtd to crash in some
scenarios.

The fix is to only allow an existing inactive VM if it is
marked as persistent.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of using a port from the remote display range.

https://bugzilla.redhat.com/show_bug.cgi?id=1025699

Thie patch fixes the segfault:
    error : nodeStateInitialize:658 : DBus not available,
      disabling HAL driver: internal error: Unable to get DBus
      system bus connection: Failed to connect to socket
      /var/run/dbus/system_bus_socket: No such file or directory
    error : nodeStateInitialize:719 :  ?:
    Caught Segmentation violation dumping internal log buffer:

This segfault occurs at the below VIR_ERROR:
  failure:
      if (dbus_error_is_set(&err)) {
          VIR_ERROR(_("%s: %s"), err.name, err.message);

When virDBusGetSystemBus fails, the code jumps to the above failure
path. However, the err variable is not correctly initialized
before calling virDBusGetSystemBus. As a result, dbus_error_is_set
may pass over the uninitialized err variable whose name or
message may point to somewhere unknown memory region, which
causes a segfault on VIR_ERROR.

The new code initializes the err variable before calling
virDBusGetSystemBus.
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>

Include reference of the VM object pointer and name in debug
logs for QEMU start/stop functions. Also make sure we log the
PID that we started, since it isn't available elsewhere in the
logs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In debugging a recent oVirt/libvirt race condition, I was very
frustrated by lack of logging in the job enter/exit code. This
patch adds some key data which would have been useful in by
debugging attempts.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>