Since commit a7424faf QMP is always used.

Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The event was added by qemu commit 6f382ed226f3 released in v1.1.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

DEVICE_DELETED was added in qemu commit 0402a5d65ec00 which was released
in v1.5.0.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The event was added by qemu commit 2fdd16e239c2a2 released in v1.3.0.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The event was added to qemu by commit 973603a813c5d60 which is contained
in the 1.2.0 release.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.

Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.

All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.

This commit is best viewed with 'git show -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Previous commits removed all capabilities from per-device property
probing for:

  pci-assign
  kvm-pci-assign
  usb-host
  scsi-generic

Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.

Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 72574808
from 2012.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Added by QEMU commit 65bb3a5 contained in v1.1.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Added by QEMU commit 65bb3a5 contained in v1.1.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Added by commit fc66c160 and not used since.

Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.

There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.

Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:

1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe.  From the differences I only extracted the reply to the new
QMP command and discarded the rest.  For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.

In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability.  Then removed that one property.

After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NFilip Alac <filipalac@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.

However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa14>.

Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.

Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The NBD server in qemu supports TLS transport. Detect this capability.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU translates the cache mode of a disk internally into 3 flags.
'write-cache' is a flag of the frontend while others are flag of the
backing storage. Add capability which will allow expressing it via the
frontend attribute.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Implied by QEMU >= 1.3.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Delete the negative test cases now that they always pass.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>