- 09 12月, 2016 8 次提交
-
-
由 Michal Privoznik 提交于
The variable may be used uninitialized in this function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Mehdi Abaakouk 提交于
This is just a code move of virstat.c to virnetdevtap.c
-
由 Mehdi Abaakouk 提交于
In preparation to the code move to virnetdevtap.c, this change: * renames virNetInterfaceStats to virNetDevTapInterfaceStats * changes 'path' to 'ifname', to use the same vocable as other method in virnetdevtap.c. * Add the attributes checker
-
由 Mehdi Abaakouk 提交于
When vhostuser interfaces are used, the interface statistics are not available in /proc/net/dev. This change looks at the openvswitch interfaces statistics tables to provide this information for vhostuser interface. Note that in openvswitch world drop/error doesn't always make sense for some interface type. When these informations are not available we set them to 0 on the virDomainInterfaceStats. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
If the 'nleases < 0' on return, then the subsequent call to findLeaseInJSON will not produce the expected results (passed in as a size_t, but nleases is a ssize_t). So check if the returned value < 0 and if so, goto cleanup. Found by Coverity as a NEGATIVE_RETURNS event
-
由 John Ferlan 提交于
If the allocation fails in DO_TEST_FLUSH_PROLOGUE, then 'mgr == NULL', but the code continues on - which won't be good. So modify the macro to cause an immediate failure and jump to a cleanup label. Found by Coverity as FORWARD_NULL event.
-
由 John Ferlan 提交于
-
由 Peter Krempa 提交于
There's nothing to compress if the requested snapshot memory format is set to 'raw' explicitly. After commit 9e14689e libvirt would try to run /sbin/raw to process the memory stream if the qemu.conf option snapshot_image_format is set. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1402726
-
- 08 12月, 2016 7 次提交
-
-
由 Cédric Bosdonnat 提交于
If the monitor doesn't hold a reference to the domain object the object may be destroyed before the monitor actually stops.
-
由 Michal Privoznik 提交于
Since its introduction in 2012 this internal API did nothing. Moreover we have the same API that does exactly the same: virSecurityManagerDomainSetPathLabel. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
If you've ever tried running a huge page backed guest under different user than in qemu.conf, you probably failed. Problem is even though we have corresponding APIs in the security drivers, there's no implementation and thus we don't relabel the huge page path. But even if we did, so far all of the domains share the same path: /hugepageMount/libvirt/qemu Our only option there would be to set 0777 mode on the qemu dir which is totally unsafe. Therefore, we can create dir on per-domain basis, i.e.: /hugepageMount/libvirt/qemu/domainName and chown domainName dir to the user that domain is configured to run under. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
So far this function takes virDomainObjPtr which: 1) is an overkill, 2) might be not available in all the places we will use it. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Martin Kletzander 提交于
Since the great rework of how we store vcpu- and iothread-related data, we have overly complex part of code that is trying to format the scheduler tuning data in as less lines as possible by grouping settings for multiple threads. That was designed as an input syntax sugar for users, but we don't need to also use that when formatting the XML. Switching to simple enumeration makes the code nicer, shorter and more welcoming to future changes. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Michal Privoznik 提交于
In 22f7ceb6 I've introduced another NSS module but forgot to package it in libvirt-nss.rpm. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel P. Berrange 提交于
When redoing the website we deleted the libvirtLogo.png file not remembering that the test driver screenshot API impl relied on it. Rather than having the test driver use the logo as a side effect, give it its own dedicated image to use. This is installed in /usr/share/libvirt/test-screenshot.png and is taken from a NeXT Cube running WorldWideWeb[1]. The very first web browser in existance, running on the hardware it was originally written on. [1] https://en.wikipedia.org/wiki/WorldWideWebSigned-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 12月, 2016 10 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
The *header_name* cannot be quoted, otherwise it is not translated to the passed argument. Without this fix the generated configure contains *ac_cv_header_header_name*, but there should be for example *ac_cv_header_sals_sasl_h* for "sasl/sasl.h". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
This check is not required because all i386 and x86_64 cpus have the cpuid instruction. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Commit a99bfb4b moved openwsman to its own file but forget to remove those few lines. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Peter Krempa 提交于
Qemu 2.8.0+ changes arguments structure for blockdev-add in the effort to make it finally stable. Since libvirt recently added the detection of gluster debug support relying on the old syntax we need to add the new as well.
-
由 Peter Krempa 提交于
Qemu decided to change a parameter name in rc-state which was not captured by the 2.8.0 data. Bump it to current version.
-
由 Nitesh Konkar 提交于
With current perf framework, this patch adds support and documentation for the branch_instructions perf event. Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
-
由 John Ferlan 提交于
Adjust the spacing so that the code examples are display in the code/text box rather than just as paragraph text.
-
由 John Ferlan 提交于
Adjust the spacing a bit in order to generate 'cleaner' looking output. This matches what virDomainMemoryStats does and it creates text/code boxes in order to list each of the stats for each category.
-
由 John Ferlan 提交于
When changing one of the src/libvirt-*.c files to alter the docs, the adjusted files weren't being built. Added them into APIBUILD_STAMP and then added that to the html/index.html rule which is used for the $(apihtml_generated) generated rule. Also, for clean we can remove the html/*.html files
-
- 06 12月, 2016 15 次提交
-
-
由 Viktor Mihajlovski 提交于
With kernel 3.18 (since commit 3e32cb2e0a12b6915056ff04601cf1bb9b44f967) the "unlimited" value for cgroup memory limits has changed once again as its byte value is now computed from a page counter. The new "unlimited" value reported by the cgroup fs is therefore 2**51-1 pages which is (VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - 3072). This results e.g. in virsh memtune displaying 9007199254740988 instead of unlimited for the limits. This patch uses the value of memory.limit_in_bytes from the cgroup memory root which is the system's "real" unlimited value for comparison. See also libvirt commit 231656bb for the history for kernel 3.12 and before. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
由 Michal Privoznik 提交于
So far the NSS module looks up only hostnames as provided by guests themselves. However, there are some cases where this is not enough: e.g. when there's a fresh new guest being installed (with some generic hostname) say from a live ISO image; or some (older) systems don't advertise their hostname in DHCP transactions at all. In cases like that it would be helpful if we translate domain name as seen by libvirt too so that users can: # virsh start $dom && ssh $dom In order to achieve that new libvirt-guest module is introduced, while older libvirt module maintains its current behaviour (that is translating guest provided names into IP addresses). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
The part of the code that iterates over an array of JSON values is going to be re-used. Instead of copying it over, move it to a separate function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
The part of the code that appends found IP address into a list is going to be re-used. Instead of copying it over, move it to a separate function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
The name of the exported functions for an NSS module is quite fixed, it is derived from the module name: _nss_$module_$function Since we will create another NSS module with very similar implementation we might as well generate the function names at the compile time. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Now that we have a module that's able to track <domain, mac addres list> pairs, hook it up into our network driver. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
This module will be used to track: <domain, mac address list> pairs. It will be important to know these mappings without libvirt connection (that is from a JSON file), because NSS module will use those to provide better host name translation. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
There are couple of places where we have a string and want to save it to a file. Atomically. In all those places we use virFileRewrite() but also implement the very same callback which takes the string and write it into temp file. This makes no sense. Unify the callbacks and move them to one place. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Problem with VIR_FREE() is that we are not linking libvirt-utils.so to our mock libs therefore there will be an unresolved symbol. Fortunately, nsstest that eventually links with the nssmock links also with libvirt-utils.so and thus the symbol is resolved after all. However, if one wants to run the test binary under valgrind it is impossible to do so. Because of the unresolved symbol. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
In dd7bfb2c I've removed locking of the network driver upon it's allocation. However, I forgot to remove one location of the driver unlock. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1336564 Add the ability to set/display the group_name for block device iotune Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add in the block I/O throttling group parameter to the command line if supported. If not supported, fail command creation. Add the xml2argvtest for testing. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-