* daemon/libvirtd.c: Set custom driver module dir if the current
  binary name is 'lt-libvirtd' (indicating execution directly
  from GIT checkout)
* src/driver.c, src/driver.h, src/libvirt_driver_modules.syms: Add
  virDriverModuleInitialize to allow driver module location to
  be changed
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it

* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
  instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
  src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
  in probes.d
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since we have drivers which depend on each other (ie QEMU/LXC
depend on the network driver APIs), we need to use RTLD_GLOBAL
instead of RTLD_LOCAL. While this pollutes the calling binary
with many more symbols, this is no worse than if we directly
link to the drivers, and this only applies to libvirtd

* src/driver.c: s/RTLD_LOCAL/RTLD_GLOBAL/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Only libvirt_driver_storage.la links to libblkid currently. If
we are running in a scenario with driver modules, LXC must
directly link to it, since it can't assume the storage driver
is present
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist

* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
  to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
  by test suite

libvirt_driver_nodedev.la should not link against either
libvirt_util.la or gnulib.la, since libvirt.so brings
in those deps.

* src/Makefile.am: Fix broken linkage of libvirt_driver_nodedev.la
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver modules all use symbols which are defined in libvirt.so.
Thus for loading of modules to work, the binary that libvirt.so
is linked to must export its symbols back to modules. If the
libvirt.so itself is dlopen()d then the RTLD_GLOBAL flag must
be set. Unfortunately few, if any, programming languages use
the RTLD_GLOBAL flag when loading modules :-( This means is it
not practical to use driver modules for any libvirt client side
drivers (OpenVZ, VMWare, Hyper-V, Remote client, test).

This patch changes the build process so only server side drivers
are built as modules (Xen, QEMU, LXC, UML)

* daemon/libvirtd.c: Add missing load of 'interface' driver
* src/Makefile.am: Only build server side drivers as modules
* src/libvirt.c: Don't load any driver modules
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libvirt-lock-sanlock RPM requires libvirtd, so its RPM dep
should be on libvirt-daemon, not libvirt

and use it for virDomainParseMemory. This allows to parse arbitrary
scaled value, not only memory related values as needed for the
filesystem limits code following later in this series.

Adding syslog.target is obsolete, avahi.target does not
exist and dbus.target is also obsolete
Reported-by: NLennart Poettering <lpoetter@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This reverts commit b1e374a7, which was
rather bad since I failed to consider all sides of the issue. The main
things I didn't consider properly are:

- a thread which sends a non-blocking call waits for the thread with
  the buck to process the call
- the code doesn't expect non-blocking calls to remain in the queue
  unless they were already partially sent

Thus, the reverted patch actually breaks more than what it fixes and
clients (which may even be libvirtd during p2p migrations) will likely
end up in a deadlock.

The pciDevice structure corresponding to the device being hot-unplugged
was freed after it was "stolen" from activeList. The pointer was still
used for eg-inactive list. This patch removes the free of the structure
and frees it only if reset fails on the device.

This was forgotten in commit cdb87b1c.

I'm tired of writing:

bool sep = false;
while (...) {
    if (sep)
       virBufferAddChar(buf, ',');
    sep = true;
    virBufferAdd(buf, str);
}

This makes it easier, allowing one to write:

while (...)
    virBufferAsprintf(buf, "%s,", str);
virBufferTrim(buf, ",", -1);

to trim any remaining comma.

* src/util/buf.h (virBufferTrim): Declare.
* src/util/buf.c (virBufferTrim): New function.
* tests/virbuftest.c (testBufTrim): Test it.

This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

The previous commit (2cb0899e) left a dead variable behind.

* src/libxl/libxl_driver.c (libxlClose): Drop dead variable.

When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues

Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):

Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
  calls to virDomainEventStateDeregisterConn

Commit 2223ea98 removed the only use of 'server' param in
remoteDispatchAuthPolkit().  Mark the parameter with ATTRIBUTE_UNUSED
to fix the build when configuring with polkit0.

This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.

On the command line iptables supports ipset using

iptables ... -m set --match-set <ipset name> <flags> -j ...

where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:

iptables -A INPUT -m set --match-set test src,src -j ACCEPT

Since ipset management is quite complex, the idea was to leave ipset 
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.

Using XML to describe an ipset in an nwfilter rule would then look as
follows:

  <rule action='accept' direction='in'>
    <all ipset='test' ipsetflags='src,src'/>
  </rule>

The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.

FYI: Here is the man page for ipset:

https://ipset.netfilter.org/ipset.man.html

Regards,
    Stefan

We were being lazy - virnetlink.c was getting uint32_t as a
side-effect from glibc 2.14's <unistd.h>, but older glibc 2.11
does not provide uint32_t from <unistd.h>.  In fact, POSIX states
that <unistd.h> need only provide intptr_t, not all of <stdint.h>,
so the bug really is ours.  Reported by Jonathan Alescio.

* src/util/virnetlink.h: Include <stdint.h>.

This involves setting the cpuacct cgroup to a per-vcpu granularity,
as well as summing the each vcpu accounting into a common array.
Now that we are reading more than one cgroup file, we double-check
that cpus weren't hot-plugged between reads to invalidate our
summing.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently virDomainGetCPUStats gets total cpu usage, which consists
of:

  1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
     domain
  2. hypervisor: `total cpu usage' - `vcpu usage'

The param 'vcpu_time' is for getting vcpu usages.

Test new codec type element.

With ICH6 audio device, allow to specify codecs.
By default, for compatibility reasons, if no codec is specified,
"hda-duplex" will be used.

Allow specifying sound device codecs. See formatdomain.html for
more details.

If qemuPrepareHostdevUSBDevices fail it will roll back devices added
to the driver list of used devices. However, if it may fail because
the device is being used already. But then again - with roll back.
Therefore don't try to remove a usb device manually if the function
fail. Although, we want to remove the device if any operation
performed afterwards fail.

Make it obvious why we need Osier's patch in commit 10d9038b
to fix NUMA parsing of an AMD machine with two cores sharing
a socket id.

* tests/nodeinfotest.c (linuxTestCompareFiles): Enhance the test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-*-output.txt: Update.

Allow the logging APIs to be called with a va_list for format
args, instead of requiring var-args usage.

* src/util/logging.h, src/util/logging.c: Add virLogVMessage

The use of readlink() in lxc_container.c is intentional; we don't
want an absolute pathname there.

* src/util/cgroup.h (VIR_CGROUP_SYSFS_MOUNT): Indent properly.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_readlink): Add
exemption.

One of our latest USB device handling patches
05abd150 introduced a regression.
That is, we first create a temporary list of all USB devices that
are to be used by domain just starting up. Then we iterate over and
check if a device from the list is in the global list of currently
assigned devices (activeUsbHostdevs). If not, we add it there and
continue with next iteration then. But if a device from temporary
list is either taken already or adding to the activeUsbHostdevs fails,
we remove all devices in temp list from the activeUsbHostdevs list.
Therefore, if a device is already taken we remove it from
activeUsbHostdevs even if we should not. Thus, next time we allow
the device to be assigned to another domain.

Most versions of libselinux do not contain the function
selinux_lxc_contexts_path() that the security driver
recently started using for LXC. We must add a conditional
check for it in configure and then disable the LXC security
driver for builds where libselinux lacks this function.

* configure.ac: Check for selinux_lxc_contexts_path
* src/security/security_selinux.c: Disable LXC security
  if selinux_lxc_contexts_path() is missing

Due to a bug in editing /etc/sysconfig/libvirtd, VDSM was causing
libvirt processes to run with the following command line args

   /usr/sbin/libvirtd --listen '#' 'by vdsm'

While it correctly rejects any invalid option flags, libvirtd
was not rejecting any non-option command line arguments

* daemon/libvirtd.c: Reject non-option argv

Normal practice is for cgroups controllers to be mounted at
/sys/fs/cgroup. When setting up a container, /sys is mounted
with a new sysfs instance, thus we must re-mount all the
cgroups controllers. The complexity is that we must mount
them in the same layout as the host OS. ie if 'cpu' and 'cpuacct'
were mounted at the same location in the host we must preserve
this in the container. Also if any controllers are co-located
we must setup symlinks from the individual controller name to
the co-located mount-point
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Both /proc and /sys may have sub-mounts in them from the host
OS. We must explicitly unmount them all before mounting the
new instance over that location. If we don't then /proc/mounts
will show the sub-mounts as existing, even though nothing will
be able to access them, due to the over-mount.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If the LXC config has a filesystem

  <filesystem>
     <source dir='/'/>
     <target dir='/'/>
  </filesystem>

then there is no need to go down the pivot root codepath.
We can simply use the existing root as needed.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently to make sysfs readonly, we remount the existing
instance and then bind it readonly. Unfortunately this means
sysfs is still showing device objects wrt the host OS namespace.
We need it to reflect the container namespace, so we must mount
a completely new instance of it. Do the same for selinuxfs since
there is no benefit to bind mounting & this lets us simplify
the code.

* src/lxc/lxc_container.c: Mount fresh sysfs instance
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>