- 13 12月, 2012 2 次提交
-
-
由 Roman Bogorodskiy 提交于
It's no longer used and also causes build fail on FreeBSD.
-
由 Viktor Mihajlovski 提交于
make check fails in check-symsorting if configure is not run in the source directory. Prefixing symfile names with $(srcdir) fixes this. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 12 12月, 2012 29 次提交
-
-
由 Peter Krempa 提交于
Report an error if unlink of the managedsave file fails.
-
由 Peter Krempa 提交于
Save a few lines moving assignments into conditions and fix braces position.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
This patch adds a new domain lookup helper qemuDomObjFromDomainDriver that lookups the domain and leaves the driver locked. The driver is returned as the second argument of that function. If the lookup fails the driver is unlocked to help avoid cleanup codepaths. This patch also improves docs for the helpers.
-
由 Peter Krempa 提交于
I didn't notice the extra "does" in the previous patch. Remove it.
-
由 Peter Krempa 提交于
This patch gets rid of the undeterministic error reporting code done on return values of get(pw|gr)nam_r. With this patch, if the group record is not returned by the corresponding function this error is not considered fatal even if errno != 0. The error is logged in such case.
-
由 Daniel P. Berrange 提交于
Move the code for matching hostdev instances out of virDomainHostdevFind and into virDomainHostdevMatch method, which in turn calls out to other helper methods depending on the type of hostdev. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Rename virDomainHostdevPartsParse to virDomainHostdevDefParseSubsys to reflect the fact that it only deals with hostdevs uing the traditional mode=subsystem, and not mode=capabilities Rename virDomainHostSourceFormat to virDomainHostdevDefFormatSubsys for the same reason. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
virStorageFileGetLVMKey and virStorageFileGetSCSIKey both return heap allocated strings, so the return value should not be marked const. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
Add check-symsorting.pl to perform case-insensitive alphabetical sorting of groups of symbols. Fix all violations it reports Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
Most of this deals with moving the libvirt-guests.sh script which does all the work to /usr/libexec, so it can be shared by both systemd and traditional init. Previously systemd depended on the script being in /etc/init.d Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
-
由 Serge Hallyn 提交于
When using vnc gaphics over a unix socket, virt-aa-helper needs to provide access for the qemu domain to access the sockfile. Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
-
由 Serge Hallyn 提交于
When a qemu domain is backed by huge pages, apparmor needs to grant the domain rw access to files under the hugetlbfs mount point. Add a hook, called in qemu_process.c, which ends up adding the read-write access through virt-aa-helper. Qemu will be creating a randomly named file under the mountpoint and unlinking it as soon as it has mmap()d it, therefore we cannot predict the full pathname, but for the same reason it is generally safe to provide access to $path/**. Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
-
由 Eric Blake 提交于
I noticed that on Fedora 18, xlstproc decides to regenerate HACKING with additional whitespace. I haven't figured out why that is happening (although fixing it would probably be a task for xlstproc), but in the process of investigating, I noticed that 'make HACKING' was completely silent, for no good reason. * Makefile.am (gen-ChangeLog, gen-AUTHORS, NEWS) ($(top_srcdir)/HACKING): Mention which files we are generating.
-
由 Jiri Denemark 提交于
-
由 Peter Krempa 提交于
Save and managedsave both use migration to file. This patch reuses qemuMigrationIsAllowed to check if the migration could happen before trying.
-
由 Peter Krempa 提交于
Qemu doesn't support migration on guests with host devices. This patch adds a check to ensure migration is safe before actually doing so.
-
由 Peter Krempa 提交于
This patch exports qemuMigrationIsAllowed and adds a new parameter to it to denote if it's a remote migration or a local migration. Local migrations are used in snapshots and saving of the machine state and have fewer restrictions. This patch also adjusts callers of the function and tweaks some error messages to be more universal.
-
由 Ján Tomko 提交于
Currently there is no way to detect it via QMP and requesting "-sandbox off" works correctly even if it was compiled out, so this will work unless someone both requests the sandbox in qemu.conf and builds QEMU without the support for it.
-
由 Michal Privoznik 提交于
Interfaces keeps a class_id, which is an ID from which bridge part of QoS settings is derived. We need to store class_id in domain status file, so we can later pass it to virNetDevBandwidthUnplug.
-
由 Michal Privoznik 提交于
Currently, we are only keeping a inactive XML configuration in status dir. This is no longer enough as we need to keep this class_id attribute so we don't overwrite old entries when the daemon restarts. However, since there has already been release which has just <network/> as root element, and we want to keep things compatible, detect that loaded status file is older one, and don't scream about it.
-
由 Michal Privoznik 提交于
Network should be notified if we plug in or unplug an interface, so it can perform some action, e.g. set/unset network part of QoS. However, we are doing this in very early stage, so iface->ifname isn't filled in yet. So whenever we want to report an error, we must use a different identifier, e.g. the MAC address.
-
由 Michal Privoznik 提交于
This will be used whenever a NIC with guaranteed throughput is to be plugged into a bridge. It will adjust the average throughput of non guaranteed NICs (classid 1:2) to meet new requirements.
-
由 Michal Privoznik 提交于
These set bridge part of QoS when bringing domain's interface up. Long story short, if there's a 'floor' set, a new QoS class is created. ClassID MUST be unique within the bridge and should be kept for unplug phase.
-
由 Michal Privoznik 提交于
These classes can borrow unused bandwidth. Basically, only egress qdsics can have classes, therefore we can do this kind of traffic shaping only on host's outgoing, that is domain's incoming traffic.
-
由 Michal Privoznik 提交于
This is however supported only on domain interfaces with type='network'. Moreover, target network needs to have at least inbound QoS set. This is required by hierarchical traffic shaping. From now on, the required attribute for <inbound/> is either 'average' (old) or 'floor' (new). This new attribute can be used just for interfaces type of network (<interface type='network'/>) currently.
-
由 Michal Privoznik 提交于
Stochastic Fairness Queuing (SFQ) is queuing discipline (qdisc) which doesn't really shape any traffic but 'just' re-arrange packets in sending buffer so no stream starve. The goal is to ensure fairness. There is basically only one configuration parameter (perturb) which is set to advised value of 10.
-
- 11 12月, 2012 9 次提交
-
-
由 Dmitry Guryanov 提交于
Network adapters of type 'routed' is a special case. Other adapters have 'network' parameter in prlctl's output instead. Routed network adapters should be connected to 'routed' network from libvirt's view. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Historically if traffic from the adapter is routed to LAN without NAT, it isn't connected to any virtual networks, but has a 'type' instead. Sinse libvirt has special virtual network type for such case, let's add pseudo network 'routed' to fit libvirt's API well. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Fill bridge name and mac for bridged network and DHCP server parameter for host-only network. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Parallels Cloud Server uses virtual networks model for network configuration. It uses own tools for virtual network management. So add network driver, which will be responsible for listing virtual networks and performing different operations on them (in consequent patched). This patch only allows listing virtual network names, without any parameters like DHCP server settings. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
This macro will be used in another file in the next patch, so move it to common header file. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Allow changing network interfaces in domain configuration. ifname is used as iterface identifier: if there is interface with some ifname in old config and there are no interfaces with such name in the new config - issue prlctl command to delete the network interface. And vice versa - if interface with some ifname exists only in new config - issue prlctl command to create it. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Parse network interfaces info from prlctl output. Parallels Cloud Server uses virtual networks model for network configuration: You can add network adapter to VM and connect it to some predefined virtual network. Fill type, mac, network name and linkstate fields of virDomainNetDef structure. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Peter Krempa 提交于
When the disk snapshot part of an external system checkpoint fails the memory image is retained. This patch adds code to remove the image in such case.
-
由 Peter Krempa 提交于
In case the snapshot code isn't able to restart CPUs after an external checkpoint we would leak a copy of the domains XML definition. This patch fixes the cleanup path.
-