- 09 6月, 2015 6 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Cole Robinson 提交于
We need to use qemu-system-aarch64 to run armv7l KVM VMs on an aarch64 host.
-
由 Cole Robinson 提交于
And it always has, so advertise it similarly to i686
-
由 Cole Robinson 提交于
qemu 2.3.0 added the -cpu host,aarch64=off option, which allows using qemu-system-aarch64 KVM to run armv7l VMs. Add a capabilities check for it, wire it up in qemu_command, and test the command line generation.
-
由 Nikolay Shirokovskiy 提交于
2 reasons to to this. 1. PCS SDK really don't care of handler return value. 2. It hard to imagine how notifier can handle subscriber failures. Even if there are some situations we probably will use some special error codes and not just throw error codes we get from SDK itself. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>
-
由 Nikolay Shirokovskiy 提交于
Use issuer type instead of event type to group vm related events. This saves us from explicit enumeration of all vm event types in prlsdkHandleVmEvent.
-
- 08 6月, 2015 3 次提交
-
-
由 Michal Privoznik 提交于
Not every architecture out there has 'char' signed by default. For instance, my arm box has it unsigned by default: $ gcc -dM -E - < /dev/null | grep __CHAR_UNSIGNED__ #define __CHAR_UNSIGNED__ 1 Therefore, after 65c61e50 the test if failing for me. Problem is, we are trying to assign couple of negative values into char assuming some will overflow and some don't. That can't be the case if 'char' is unsigned by default. Lets use more explicit types instead: int8_t and uint8_t where is no ambiguity. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Roman Bogorodskiy 提交于
Commit 825df8c3 refactored virProcess{Set,Get}Affinity routines, however broke BSD implementation because of the incorrect variable name. Fix build by using a proper variable name. Pushing as trivial and build break fix.
-
由 Peter Krempa 提交于
The stubs for the two functions that are compiled on platforms that don't have HAVE_GETPWUID_R and friends defined do not return error but report an error message. The calling code then assumes that the @uid or @gid arguments were filled, which is not the case in the stubs.
-
- 05 6月, 2015 19 次提交
-
-
由 Ján Tomko 提交于
We were effectively ignoring its errors anyway.
-
由 Ján Tomko 提交于
The monitor code does not hold the virDomainObjPtr lock and should not access the defitinion.
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
There's no point in calling the monitor if there is no balloon.
-
由 Ján Tomko 提交于
There is nothing to get from the monitor for model='none'.
-
由 Ján Tomko 提交于
It only makes sense if qemuMonitorGetMemoryStats is called, but the following patch will make that call conditional.
-
由 Ján Tomko 提交于
Reduce the indentation level.
-
由 Ján Tomko 提交于
All the callers use "/" anyway.
-
由 Ján Tomko 提交于
When traversing through the QOM tree, we're looking for a link to a device, e.g.: link<virtio-balloon-pci> Introduce a helper that will format the link name at the start, instead of doing it every time while recursing through the tree.
-
由 Ján Tomko 提交于
This function is specific to the JSON monitor.
-
由 Daniel P. Berrange 提交于
Ref service passed as a parameter to the callback. And don't unref the socket that is part of the service being passed at another point in code. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Daniel P. Berrange 提交于
Append privateData of the client only if there are any, otherwise the previous value (socket data) will get there again. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Daniel P. Berrange 提交于
As opposed to 'static'; by exporting it (privately). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
When building without avahi support, we used VIR_DEBUG() to note that to the user. However, functions that fail because of that (return NULL/-1) did not set the error message. This was the only file that forgot to do such thing. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1181087 The virStorageBackendFileSystemIsMounted is called from three source paths checkPool, startPool, and stopPool. Both start and stop validate the FS fields before calling *IsMounted; however the check path there is no call. This could lead the code into returning a true in "isActive" if for some reason the target path for the pool was mounted. The assumption being that if it was mounted, then we believe we started/mounted it. It's also of note that commit id '81165294' added an error message for the start/mount path regarding that the target is already mounted so fail the start. That check was adjusted by commit id '13fde7ce' to only message if actually mounted. At one time this led to the libvirtd restart autostart code to declare that the pool was active even though the startPool would inhibit startup and the stopPool would inhibit shutdown. The autostart path changed as of commit id '2a31c5f0' as part of the keep storage pools started between libvirtd restarts. This patch adds the same check made prior to start/mount and stop/unmount to ensure we have a valid configuration before attempting to see if the target is already mounted to declare "isActive" or not. Finding an improper configuration will now cause an error at checkPool, which should make it so we can no longer be left in a situation where the pool was started and we have no way to stop it.
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1181087 Currently the assumption on the error message is that there are no source device paths defined when the number of devices check fails, but in reality the XML could have had none or it could have had more than the value supported. Adjust the error message accordingly to make it clearer what the error really is.
-
由 John Ferlan 提交于
Refactor the code for both startPool (*Mount) and stopPool (*Unmount) code paths by introducing virStorageBackendFileSystemIsValid.
-
由 John Ferlan 提交于
Over time the parameters changed, but the comment wasn't updated
-
由 Eric Blake 提交于
Commit 1882c0bd accidentally used ',' instead of ';'; oddly enough, the result was still syntactically valid (yes, C is a fun language). But it made me do a double take; it's better to use idiomatic syntax. * daemon/remote.c (remoteRelayDomainEventDeviceAdded): Fix harmless typo. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 04 6月, 2015 12 次提交
-
-
由 Peter Krempa 提交于
In qemuDomainUpdateCurrentMemorySize I misplaced the actual update of the balloon size to a place where it may not be initialized. Move it a few lines above.
-
由 Peter Krempa 提交于
Coverity rightfully determined that in commit 3d021381 I made a mistake in the first check if @persDef is not NULL is dereferencing it rather than checking. Additionally if the vm is online the code would set @liveDef twice rather than modifying @persDef. Fix both mistakes.
-
由 Martin Kletzander 提交于
When getting block device I/O tuning data there is no check for whether QEMU supports such options and the call fails on qemuMonitorGetBlockIoThrottle() when getting the particular throttle data. So try reporting a better error when blkdeviotune is not supported. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1224053Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-