Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The defines QEMU_REMOTE_PORT_MIN and QEMU_REMOTE_PORT_MAX were used to
find free port when starting domains. As this was hard-coded to the
same ports as default VNC servers, there were races with these other
programs. This patch includes the possibility to change the default
starting port as well as the maximum port (mostly for completeness) in
qemu config file.

Support for two new config options in qemu.conf is added:
 - remote_port_min (defaults to QEMU_REMOTE_PORT_MIN and
   must be >= than this value)
 - remote_port_max (defaults to QEMU_REMOTE_PORT_MAX and
   must be <= than this value)

Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If vdsm is installed and configured in Fedora 17, we add the following
items into qemu.conf:

spice_tls=1
spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"

However, after this changes, augtool cannot identify qemu.conf anymore.

Curently security labels can be of type 'dynamic' or 'static'.
If no security label is given, then 'dynamic' is assumed. The
current code takes advantage of this default, and avoids even
saving <seclabel> elements with type='dynamic' to disk. This
means if you temporarily change security driver, the guests
can all still start.

With the introduction of sVirt to LXC though, there needs to be
a new default of 'none' to allow unconfined LXC containers.

This patch introduces two new security label types

 - default:  the host configuration decides whether to run the
             guest with type 'none' or 'dynamic' at guest start
 - none:     the guest will run unconfined by security policy

The 'none' label type will obviously be undesirable for some
deployments, so a new qemu.conf option allows a host admin to
mandate confined guests. It is also possible to turn off default
confinement

  security_default_confined = 1|0  (default == 1)
  security_require_confined = 1|0  (default == 0)

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add new
  seclabel types
* src/security/security_manager.c, src/security/security_manager.h:
  Set default sec label types
* src/security/security_selinux.c: Handle 'none' seclabel type
* src/qemu/qemu.conf, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
  src/qemu/libvirtd_qemu.aug: New security config options
* src/qemu/qemu_driver.c: Tell security driver about default
  config

This patch adds max_files option to qemu.conf which can be used to
override system default limit on number of opened files that are
allowed for qemu user.

This patch creates an optional BeginJob queue size limit. When
active, all other attempts above level will fail. To set this
feature assign desired value to max_queued variable in qemu.conf.
Setting it to 0 turns it off.

When auto-dumping a domain on crash events, or autostarting a domain
with managed save state, let the user configure whether to imply
the bypass cache flag.

* src/qemu/qemu.conf (auto_dump_bypass_cache, auto_start_bypass_cache):
Document new variables.
* src/qemu/libvirtd_qemu.aug (vnc_entry): Let augeas parse them.
* src/qemu/qemu_conf.h (qemud_driver): Store new preferences.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Parse them.
* src/qemu/qemu_driver.c (processWatchdogEvent, qemuAutostartDomain):
Honor them.

The QEMU integrates with the lock manager instructure in a number
of key places

 * During startup, a lock is acquired in between the fork & exec
 * During startup, the libvirtd process acquires a lock before
   setting file labelling
 * During shutdown, the libvirtd process acquires a lock
   before restoring file labelling
 * During hotplug, unplug & media change the libvirtd process
   holds a lock while setting/restoring labels

The main content lock is only ever held by the QEMU child process,
or libvirtd during VM shutdown. The rest of the operations only
require libvirtd to hold the metadata locks, relying on the active
QEMU still holding the content lock.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
  src/qemu/libvirtd_qemu.aug, src/qemu/test_libvirtd_qemu.aug:
  Add config parameter for configuring lock managers
* src/qemu/qemu_driver.c: Add calls to the lock manager

This patch adds max_processes option to qemu.conf which can be used to
override system default limit on number of processes that are allowed to
be running for qemu user.

Fixes test failure that was overlooked after commit 1e1f7a89.

* daemon/Makefile.am (check-local): Let 'make check' fail on error.
* daemon/test_libvirtd.aug: Move qemu-specific option...
* src/qemu/test_libvirtd_qemu.aug: ...into correct test.
* src/qemu/libvirtd_qemu.aug: Parse new option.

`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)

Currently only qemu is supported.

Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.

In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.

This code reuses some of save_image_format[] and supports the same format.

Changelog:
 - modified libvirtd_qemu.aug
 - modified test_libvirtd_qemu.aug
 - fixed error handling of qemudSaveCompressionTypeFromString()

This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
  QEmu help output, add the option in qemu conf file and augment
  qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
  the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now

Disk format probing is now disabled by default. A new config
option in /etc/qemu/qemu.conf will re-enable it for existing
deployments where this causes trouble

Currently there is no way to opt out of libvirt dropping POSIX
capabilities for qemu. This at least is a useful debugging tool, but
is also wanted by users (and distributors):

https://bugzilla.redhat.com/show_bug.cgi?id=559154
https://bugzilla.redhat.com/show_bug.cgi?id=573850

v2: Clarify qemu.conf comment, warn about security implications

v3: Add .aug changes

Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.

Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.

v2: Fix doc typos, change name to vnc_allow_host_audio

Add the ability to turn off dynamic management of file permissions
for libvirt guests.

* qemu/libvirtd_qemu.aug: Support 'dynamic_ownership' flag
* qemu/qemu.conf: Document 'dynamic_ownership' flag.
* qemu/qemu_conf.c: Load 'dynamic_ownership' flag
* qemu/test_libvirtd_qemu.aug: Test 'dynamic_ownership' flag

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
  to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
  libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
  uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
  and the qemu/*.aug files. Add test case for QEMU augeas files.
  Add uninstall-local rule for files/directories created during
  install. Rename install-exec-local to install-data-local.
  Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move

* qemud/: Rename to daemon/
* Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c,
  tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed

Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests

Fix up a small memory leak pointed out by DanB; I was forgetting
to release memory allocated to driver->saveImageFormat.
Also add the "save_image_format" and "security" entries to
the augeas lens.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

 * qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
   src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
   parameters
 * src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
   for cgroups
 * src/qemu_driver.c: Only use cgroups controllers that are activated,
   and use configured device whitelist instead of default, if set.

* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
  src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
  guests. Change user/group ownership on disks/usb/pci devs.
  Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
  username/groupname to user ID / group ID

by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.