The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The error reporting code will invoke a callback when any error
is raised and the default callback will print to stderr. The
virRaiseErrorFull method also sends all error messages on to the
logging code, which also prints to stderr by default. To avoid
duplicated data on stderr, the logging code has some logic to
skip emission when no log outputs are configured, which checks
whether the virLogSource == VIR_LOG_FROM_ERROR.

Meanwhile the libvirtd daemon can register another callback which
is used to reduce log message priority from error to a lower level.
When this is used we do want messages to end up on stderr, so the
error code will conditionally use either VIR_LOG_FROM_FILE or
VIR_LOG_FROM_ERROR depending on whether such a callback is provided.

This will all complicate later refactoring. By pushing the checks
for whether a log output is present up a level into the error code,
the special cases can be isolated in one place.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

With the vast number of log debug statements in the code, the
logging framework has a measurable performance impact on libvirt
code, particularly in the daemon event loop.

The global log buffer records every single log message triggered
whether anyone cares to see them or not. This makes it impossible
to eliminate the overhead of printf format expansions in any of
the logging code. It is possible to disable the global log buffer
in libvirtd itself, but this doesn't help client side library
code. Also even if disabled by the config file, the existence of
the feature makes other performance improvements in the logging
layer impossible.

Instead of logging every single message to the global buffer, only
log messages that pass the log filters. This if libvirtd is set
to have log_filters="1:libvirt 1:qemu" the global log buffer will
only get filled with those messages instead of everything. This
reduces the performance burden, as well as improving the signal
to noise ratio of the log buffer.

As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 1 minute 40 seconds to do 51200
iterations with nearly all the time shown against the logging
code. After this optimization it only takes 4.6 seconds.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Coverity spotted a use of possibly undefined variable. If a server is
restarting as an result of update, the JSON file that keeps current
value of some variables will not contain the new variables. This is
the case of @max_anonymous_clients too. We are correctly querying if
there's "max_anonymous_clients" in the JSON, however, we are not
setting a sane default if there's none.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just to align the backslashes with most of the file.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Reported by Martin Kletzander

If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.

Found by:

git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This patch is not trying to fix every switch, just the ones I worked
with last time, because some of these were especially unreadable.
Covers enums virDomainGraphicsType and virDomainChrType (where
applicable).

Also sort its cases by their value.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When ran, cil is throwing out some errors and warnings for obsolete
'or' unused variables and wrong module name (it should not contain a
hyphen; hence the rename).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Eliminate all the code re-use which checks for priv->agentError or
priv->agent.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

While running qemuxml2xmltest, it was found that valgrind pointed out
the following memory leak:

==21905== 26 bytes in 1 blocks are definitely lost in loss record 23 of 69
==21905==    at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==21905==    by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==21905==    by 0x4CD986D: virDomainChrSourceDefParseXML (domain_conf.c:7233)
==21905==    by 0x4CE4199: virDomainChrDefParseXML (domain_conf.c:7512)
==21905==    by 0x4CFAF3F: virDomainDefParseXML (domain_conf.c:12303)
==21905==    by 0x4CFB46E: virDomainDefParseNode (domain_conf.c:13031)
==21905==    by 0x4CFB5E9: virDomainDefParse (domain_conf.c:12973)
==21905==    by 0x41E9D8: testCompareXMLToXMLFiles (qemuxml2xmltest.c:40)
==21905==    by 0x41EBAA: testCompareXMLToXMLHelper (qemuxml2xmltest.c:93)
==21905==    by 0x421D21: virtTestRun (testutils.c:199)
==21905==    by 0x41FCE9: mymain.part.0 (qemuxml2xmltest.c:244)
==21905==    by 0x42249D: virtTestMain (testutils.c:782)
==21905==
... and 7 more

Addition of vshConnect() makes virConnectOpen() functions obsolete in
virsh.  Thus all virsh-*.[ch] files should be left only with
vshConnect() in the case of need.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Introducing keepalive similarly to Guannan around 2 years ago.  Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.

Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.

This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server).  If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Make virt-aa-helper create rules to allow VMs access to filesystem
mounts from the host.
Signed-off-by: NFelix Geyer <debfx@fobos.de>
Signed-off-by: NHiroshi Miura <miurahr@linux.com>
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>

While running domainsnapshotxml2xmltest, it was found that valgrind pointed out
the following memory leak:

==32176== 42 (32 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 42 of 66
==32176==    at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==32176==    by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==32176==    by 0x4C65A07: virReallocN (viralloc.c:243)
==32176==    by 0x4C65B2E: virExpandN (viralloc.c:292)
==32176==    by 0x4C65E30: virInsertElementsN (viralloc.c:434)
==32176==    by 0x4CD71F3: virDomainDiskSourceDefParse (domain_conf.c:5078)
==32176==    by 0x4CF6EF4: virDomainSnapshotDefParseNode (snapshot_conf.c:151)
==32176==    by 0x4CF7314: virDomainSnapshotDefParseString (snapshot_conf.c:410)
==32176==    by 0x41FB8D: testCompareXMLToXMLHelper (domainsnapshotxml2xmltest.c:100)
==32176==    by 0x420FD1: virtTestRun (testutils.c:199)
==32176==    by 0x41F859: mymain (domainsnapshotxml2xmltest.c:222)
==32176==    by 0x42174D: virtTestMain (testutils.c:782)
==32176==
... and one more.

Add a check that domain is active before attempting to destroy it.

The virNWFilterVarCombIterNext method will free its
parameter when it gets to the end of the iterator.
This is somewhat misleading design, making it appear
as if the caller has a memory leak. Remove the free'ing
of the parameter and ensure that the calling method
ebiptablesCreateRuleInstanceIterate free's it instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The ebiptablesAddRuleInst method would leak an instance
of ebiptablesRuleInstPtr if it hit OOM when adding it
to the list of instances. Remove the pointless helper
method virNWFilterRuleInstAddData and just inline the
call to VIR_APPEND_ELEMENT and free the instance on
failure.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxl driver reads /proc/xen/capabilities to see if it
is on a Dom0 kernel. If that file does not even exist though,
an error is logged. Check for the file existance before trying
to read its contents to avoid the log message.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Addition of the hostbridge device was mistakenly placed to
bhyveBuildNetArgStr(). This could result in hostbridge device not being
added to the commandline if there are no network devices specified, but
hostbridge device should be added unconditionally.

Fix by placing it to virBhyveProcessBuildBhyveCmd().

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=992980

This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

- As of commit 2ff4c137, all virGet*() functions in datatypes.c always
  return pointers to new objects. Objects are not cached in a
  per-connection hashtable.

- Fix variable names in comments for all vir*Dispose() functions in
  datatypes.c.

- Add comments for virGetStream(), virStreamDispose(),
  virGetDomainSnapshot(), virDomainSnapshotDispose().
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Add bhyveNodeGetInfo() which is a simple wrapper around nodeGetInfo()
from src/nodeinfo.c.

Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.

Thre was a syntax error in checking virRegisterStateDriver in
the remote driver, and bogus checking of a void return type
of virDomainConfNWFilterRegister in nwfilter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This commit moves a few directories into more appropriate subpackages.
In a few cases a directory is owned by two subpackages, however this is
OK as long as the permissions and ownership for the directory are
consistent between them.

- %{_sysconfdir}/libvirt/qemu/

  Used by the qemu and network drivers.

  When building with separate driver modules, this directory is only
  owned by l-d-d-network. l-d-d-qemu has a hard dependency on
  l-d-d-network, which means this directory is created with the
  correct permissions and ownership, however it's clearer if both
  subpackages own the directory independently.

- %{_sysconfdir}/libvirt/nwfilter/

  Used by the nwfilter driver only.

  This directory is currently always owned by libvirt-daemon. This
  commit moves it into l-d-d-nwfilter when building with separate
  driver modules.

- %{_localstatedir}/run/libvirt/network/

  Used by the network and nwfilter drivers.

  When building without separate driver modules, this directory is
  should be owned by libvirt-daemon only if either of these drivers
  are enabled. When building with separate driver modules, this
  directory should be owned by l-d-d-nwfilter in addition to
  l-d-d-network.

- %{_datadir}/libvirt/networks/ and
  %{_datadir}/libvirt/networks/default.xml

  Used only by the %post scriptlet in libvirt-daemon-config-network.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.

I've also updated all other places and unify the way we check the
return value.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:

  <seclabel type='dynamic' model='selinux' relabel='yes'/>

Erroring with:

  $ sudo virsh domxml-to-native qemu-argv f
  error: XML error: security label is missing

All drivers are fixed, but only qemu was tested.

Just skip the vhost command line generation, since this won't work if
attempting to run manually.

-S causes qemu to start in the paused state. Since XML2Native is intended
to generate something that users can run directly, this will trip them up.

We have to explicitly destroy TAP devices on FreeBSD because
they're not freed after being closed, otherwise we end up with
orphaned TAP devices after destroying a domain.

Do not include test_libvirt_lockd.aug when configured without qemu
driver.

https://bugzilla.redhat.com/show_bug.cgi?id=1071777

A recent change to openvz_driver.c caused Coverity to make additional
comparisons and find that the openvzRegister() was not checking the
status of virRegisterDriver() call like other callers and thus generated
a CHECKED_RETURN condition

This rule wouldn't be able to find any case of a hardcoded indent that
was in the middle of a string, but then virBuffer doesn't add
indentation in the middle of a string either.