Overwrite any randomly generated UUID to use a hardcoded value, so
we don't need to blank it when comparing XML.

None of the test cases depend on dropping these XML bits

Now that the file migration doesn't require us to use 'dd' and other
legacy stuff for too old qemus we don't even have to calcuate the
offsets and other stuff.

With the currently supported qemus we always migrate to file
descriptors so the old function is not required any more.

Additionally QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE macro is now
unused.

In cf113e8d we changed the declaration of
virCgroupAllowDevicePath() and virCgroupDenyDevicePath().
However, while updating the stub for non-cgroup platforms for the
former we forgot to update the latter too causing a build
failure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit 611a278f.

According to the original commit message, this is dead code:

  It is highly unlikely that a backend will know how to create a
  volume from a different volume (buildVolFrom) and not know how to
  create an empty volume (createVol).

Although it currently doesn't cause any linking issues, the symbol should be
exported correctly according to our conventions.

Since we introduced listing API earlier in these series, it's time
to wire up the API to the virt-admin client.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.

Best viewed with -M.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

oVirt wants to use OVMF images on top of lvm for their 'logical'
storage thus we should set up device ACLs for them so it will actually
work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1305922

They will later be reused for setting cgroup for other image backed
devices.

Separate the Teardown and Setup code paths into separate helpers.

For other objects we use the two functions rather than one with a bool.
Convert qemuSetImageCgroup to the same approach.

Rather than reporting it and then reseting the error, don't report it in
the first place.

When adding disk images to ACL we may call those functions on NFS
shares. In that case we might get an EACCES, which isn't really relevant
since NFS would not hold a block device. This patch adds a flag that
allows to stop reporting an error on EACCES to avoid spaming logs.

Currently there's no functional change.

Since commit 47e5b5ae virCgroupAllowDevice allows to pass -1 as either
the minor or major device number and it automatically uses '*' in place
of that. Reuse the new approach through the code and drop the duplicated
functions.

Similarly to commit 47e5b5ae virCgroupDenyDevice will handle -1 as *.

After removing capability check for fd migration the code that was left
behind didn't make quite sense. The old exec migration would be used in
case when pipe() failed. Remove the old code and make failure of pipe()
a hard error.

This additionally removes usage of virCgroupAllowDevicePath outside of
qemu_cgroup.c.

This function doesn't do anything useful since 2049ef99.

Since no value in the virGICVersion enumeration is negative, a clever
enough compiler can report an error such as

  src/conf/domain_conf.c:15337:75: error: comparison of unsigned enum
  expression < 0 is always false [-Werror,-Wtautological-compare]
    if ((def->gic_version = virGICVersionTypeFromString(tmp)) < 0 ||
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~

virGICVersionTypeFromString() can, however, return a negative value if
the input string is not part of the enumeration, so we definitely need
that check.

Work around the problem by storing the return value in a temporary int
variable.

Move function into qemu_domain.c.

Create a new module qemu_alias.c to handle the qemuAssign*Alias* APIs
and the qemuDomainDeviceAliasIndex

Move function to qemu_process.c, rename to qemuProcessNetworkPrepareDevices
and make it static.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move function to qemu_interface.c and rename to qemuInterfaceOpenVhostNet
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.

Make qemuDomainSupportsPCI non static.

Also, move and rename the following:

qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move qemuDomainSupportsNicdev and qemuDomainSupportsNetdev into qemu_domain.c
and expose from there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.

Rename function to qemuInterfaceBridgeConnect and modify callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.

Rename function to qemuInterfaceDirectConnect and modify callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move function closer to where it's used in qemuBuildTPMBackendStr
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move function closer to where it's used in qemuBuildTPMCommandLine

Also fix function header to match current coding practices
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move function closer to where it's used in qemuBuildTPMCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Move function closer to where it's called in qemuBuildTPMCommandLine

Also adjust function header to fit current coding guidelines
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.

Unify the naming to prepare for new test cases that will be added
later on.

Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.

Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.

GIC is always available to ARM virt machines, and the domain XML should
reflect this fact.