Splitting into two functions allows the user to call the right
function, rather than having to remember that a *Free function is
an exception to the rule.

* src/conf/storage_conf.h (virStoragePoolSourceClear): New function.
* src/libvirt_private.syms (storage_conf.h): Export it.
* src/conf/storage_conf.c (virStoragePoolSourceFree): Split...
(virStoragePoolSourceClear): ...into new function.
(virStoragePoolDefFree, virStoragePoolDefParseSourceString):
Update callers.
* src/test/test_driver.c (testStorageFindPoolSources): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSourcesFunc)
(virStorageBackendFileSystemNetFindPoolSources): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources): Likewise.

Detected by Coverity.  virStoragePoolSourceFree does not free the
actual passed-in pointer.  A bigger patch would be to rename it
virStoragePoolSourceClear to match behavior, or even split it into
two functions depending on needed behavior; but this is the minimal
fix to the one location out of eight that leaked memory.

* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Free memory.

Based on a report by Coverity.  waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status.  But we already have a helper function that does that, so
use it in more places.

* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.

Detected by Coverity.  Both text and JSON monitors set only the
bus and unit fields, which means driveAddr.controller spends
life as garbage on the stack, and is then memcpy()'d into the
in-memory representation which the user can see via dumpxml.

* src/qemu/qemu_hotplug.c (qemuDomainAttachSCSIDisk): Only copy
defined fields.

We have a new vol type "dir" in addition to "file" and "block", but
virsh doesn't know it. Fix it.

Additionally, the patch lets virsh output "unknown" if not matched
any of them.

Commit 77791dc0 allows LXC to use a host block device as a guest
filesystem, but it isn't documented yet.

	This patch adds support for "continue" and "return" actions
in filter rules.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>

More simplifications possible due to auto-indent.  Also,
<bandwidth> within <actual> was only using 6 instead of 8 spaces.

* src/util/network.h (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter signature.
* src/util/network.c (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter indentation.
(virBandwidthChildDefFormat): Tweak to make use easier.
* src/conf/network_conf.c (virPortGroupDefFormat)
(virNetworkDefFormat): Adjust callers.
* src/conf/domain_conf.c (virDomainNetDefFormat): Likewise.
(virDomainActualNetDefFormat): Likewise, and fix bandwidth
indentation.

Auto-indent makes life a bit easier; this patch also drops unused
arguments and replaces a misspelled flag name with two entry points
instead, so that callers don't have to worry about how much spacing
is present when embedding cpu elements.

* src/conf/cpu_conf.h (virCPUFormatFlags): Delete.
(virCPUDefFormat): Drop unused argument.
(virCPUDefFormatBuf): Alter signature.
(virCPUDefFormatBufFull): New prototype.
* src/conf/cpu_conf.c (virCPUDefFormatBuf): Split...
(virCPUDefFormatBufFull): ...into new function.
(virCPUDefFormat): Adjust caller.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Likewise.
* src/conf/capabilities.c (virCapabilitiesFormatXML): Likewise.
* src/cpu/cpu.c (cpuBaselineXML): Likewise.
* tests/cputest.c (cpuTestCompareXML): Likewise.

The improvements to virBuffer, along with a paradigm shift to pass
the original buffer through rather than creating a second buffer,
allow us to shave off quite a few lines of code.

* src/util/sysinfo.h (virSysinfoFormat): Alter signature.
* src/util/sysinfo.c (virSysinfoFormat, virSysinfoBIOSFormat)
(virSysinfoSystemFormat, virSysinfoProcessorFormat)
(virSysinfoMemoryFormat): Change indentation parameter.
* src/conf/domain_conf.c (virDomainSysinfoDefFormat): Adjust
caller.
* src/qemu/qemu_driver.c (qemuGetSysinfo): Likewise.

Add a test for the simple parts of my indentation changes, and
fix the fallout.

* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.

<domainsnapshot> is the first public instance of <domain> being
used as a sub-element, although we have two other private uses
(runtime state, and migration cookie).  Although indentation has
no effect on XML parsing, using it makes the output more consistent.

This uses virBuffer auto-indentation to obtain the effect, for all
but the portions of <domain> that are not generated a line at a
time into the same virBuffer.  Further patches will clean up the
remaining problems.

* src/conf/domain_conf.h (virDomainDefFormatInternal): New prototype.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Export.
(virDomainObjFormat, virDomainSnapshotDefFormat): Update callers.
* src/libvirt_private.syms (domain_conf.h): Add new export.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLFormat): Use
new function.
(qemuMigrationCookieXMLFormatStr): Update caller.

Rather than having to adjust all callers in a chain to deal with
indentation, it is nicer to have virBuffer do auto-indentation.

* src/util/buf.h (_virBuffer): Increase size.
(virBufferAdjustIndent, virBufferGetIndent): New prototypes.
* src/libvirt_private.syms (buf.h): Export new functions.
* src/util/buf.c (virBufferAdjustIndent, virBufferGetIndent): New
functions.
(virBufferSetError, virBufferAdd, virBufferAddChar)
(virBufferVasprintf, virBufferStrcat, virBufferURIEncodeString):
Implement auto-indentation.
* tests/virbuftest.c (testBufAutoIndent): Test it.
(testBufInfiniteLoop): Don't rely on internals.
Idea by Daniel P. Berrange.

The next patch wants to add some sanity checking, which would
be a different error than ENOMEM.  Many existing callers blindly
report OOM failure if virBuf reports an error, and this will be
wrong in the (unlikely) case that they actually had a usage error
instead; but since the most common error really is ENOMEM, I'm
not going to fix all callers.  Meanwhile, new discriminating
callers can react differently depending on what failure happened.

* src/util/buf.c (virBufferSetError): Add parameter.
(virBufferGrow, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscapeShell): Adjust callers.

I had some temporary test failures while working on virbuf
improvements in later patches, with output that looked like:

Expected [<]
Actual [  <]

which is pretty hard to figure out.  Adding an Offset designation
made it much easier to find which particular '<' was at the
wrong indentation, to fix the right part of the code.

* tests/testutils.c (virtTestDifference): Make it easier to
diagnose test failures.

Although the compiler wasn't complaining (since it was the pointer,
rather than what was being pointed to, that was actually const), it
looks quite suspicious to call a function with an argument labeled
const when the nature of the pointer (virBufferPtr) is hidden behind
a typedef.  Dropping const makes the function declarations easier
to read.

* src/util/buf.h: Drop const from all functions that modify buffer
argument.
* src/util/buf.c (virBufferSetError, virBufferAdd)
(virBufferContentAndReset, virBufferFreeAndReset)
(virBufferAsprintf, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscape): Fix fallout.

In a recent expansion of the documentation on network forward modes, I
incorrectly stated that incoming sessions to guests on routed networks
were blocked. This is true for guests on NATed networks, but not
routed. This patch corrects that error, and adds a pointer to the
nwfilter page for those who do want to restrict incoming sessions to
hosts on routed networks.

There is a little difference between the output of domxml-to-native and the actual commandline.
No matter qemu is in control or readline mode, domxml-to-native always converts it to readline mode.

That is because the parameter "monitor_json" for qemuBuildCommandLine() is always set to false
in qemuDomainXMLToNative().
Signed-off-by: Ntangchen <tangchen@cn.fujitsu.com>

Clarify some of the effects of managed passthrough <hostdev> devices;
with recent changes (commit d0935478), a nodedev-reattach is only needed
to pair up to an explicit nodedev-dettach (but beware that older
virt-manager has a bug where it uses explicit nodedev-dettach under the
hood when using the gui to hotplug a hostdev device).

* docs/formatdomain.html.in: Mention reattach.
* tools/virsh.pod (nodedev): Mention managed mode.

Stub out a complete impl of virFileOpenTty to avoid unused
parameter warnings

* src/util/util.c: Fix virFileOpenTty on Win32

Adds two options, inbound and outbound, to attach-interface to set
bandwidth when attaching interfaces

The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.

Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* .gitignore: Add exemption.

Add test cases for parsing the qemu-name-space.
This is based on qemuxml2argv{test,data/}, but can not reside in
qemuxml2argv{test,data/} because ...

1. qemuxmlns-qemu-ns-domain.xml is not schema-valid and breaks
domainschematest. The test is still important to detect xmlns:qemu
bindings to a name-space other than
http://libvirt.org/schemas/domain/qemu/1.0

2. they break qemuxml2xml, because the xmlns:qemu binding is moved to
the top-level <domain> element when converting from argv to xml.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

The XML parser for the qemu specific extensions expects the qemu name-space
to be bound to the 'qemu' prefix. This is too strict, since the name of the
name-space-prefix is only meant as an internal lookup key. Only the associated
URI is relevant.
<domain>...
  <qemu:commandline xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
  ...</qemu:commandline>
</domain>

<domain xmlns:ns0="http://libvirt.org/schemas/domain/qemu/1.0">...
  <ns0:commandline>
  ...</ns0:commandline>
</domain>

<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
  <qemu:commandline xmlns:qemu="urn:foo">
  ...</qemu:commandline>
</domain>

Remove the test for checking the name-space binding on the top-level <domain>
element. Registering the name-space with XPath is enough.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

When I compile libvirt with gcc-4.6.1 in ubuntu 11.10, got error as below:

  CCLD   libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_migration.o): undefined reference to symbol 'gnutls_x509_crt_get_dn@@GNUTLS_1_4'
/usr/bin/ld: note: 'gnutls_x509_crt_get_dn@@GNUTLS_1_4' is defined in DSO /usr/lib/x86_64-linux-gnu/libgnutls.so so try adding it to the linker command line
/usr/lib/x86_64-linux-gnu/libgnutls.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1

It can compile with gcc-4.5.2 in ubuntu 11.04, but it can not compile with gcc-4.6.1 in ubuntu 11.10.

I didn't find reason. Does Anyone know the reason or the different between gcc-4.5.2 and gcc-4.6.1?

I still provide a patch for this. Just make it is working now.
Signed-off-by: Nsoulxu <soulxu@soulxu-ThinkPad-T410.(none)>

The statement

        virBufferAdd(buf, "''", 2);

triggers a syntax-check warning

* src/util/buf.c: Replace virBufferAdd with virBufferAddLit

Signed-off-by: NPhilipp Hahn <hahn@univention.de>

This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme

We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML

* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
  src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
  functions

Make the empty string return '' to match cmdEcho's behavior.

Noticed when testing new libvirt against old qemu that lacked the
snapshot_blkdev HMP command.  Libvirt was mistakenly treating the
command as successful, and re-writing the domain XML to use the
just-created 0-byte file, rendering the domain broken on restart.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Notice another possible error message.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Don't keep 0-byte file
on failure.

When checking if we need to escape a single quote we were looking at the
character after the quote instead of at the quote itself.

compile error:
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuPrepareHostdevPCIDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:183: undefined reference to `pciDeviceListFind'
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:230: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuGetActivePciHostDeviceList':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:102: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuDomainReAttachHostdevDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:370: undefined reference to `pciDeviceListFind'
Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>

Waiting for qemu-kvm cleaning up the PCI bar(s) mapping with long time
while the device is not managed is just waste of time.

Tested with multiple AHCI controllers and multiple disks attached
to a controller. E.g.,

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk0.raw'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk1.raw'/>
      <target dev='sdb' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='1'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk2.raw'/>
      <target dev='sdc' bus='sata'/>
      <address type='drive' controller='1' bus='0' unit='0'/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </controller>
    <controller type='sata' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </controller>

Relatively straight-forward filtering.

* src/esx/esx_vi.h (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Add parameter.
* src/esx/esx_vi.c (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Allow leaf filtering.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames, esxDomainSnapshotNumChildren)
(esxDomainSnapshotListChildrenNames): Pass new flag through.

The referenced page does not exist, but locking.html has a section about
sanlock.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>