Jim Fehlig reported on IRC that older gcc/glibc triggers this warning:

cc1: warnings being treated as errors
qemu/qemu_domain.c: In function 'qemuDomainDefFormatBuf':
qemu/qemu_domain.c:1297: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:157: error: shadowed declaration is here [-Wshadow]
make[3]: *** [libvirt_driver_qemu_impl_la-qemu_domain.lo] Error 1

Fix it like we have done in the past (such as commit 2e6322a7).

* src/qemu/qemu_domain.c (qemuDomainDefFormatBuf): Avoid shadowing
a function name.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use a pair of 'memballoon' tags instead of single 'watchdog' one.
Add a few missing colons.

Reject multiple controllers with the same index,
except for USB controllers.
Multi-function USB controllers can have the same index.

Commit b33eb0dc missed this machine type.

Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose).  Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.

After 9d6e56db the syntax-check was unhappy due to wrong whitespacing:

  src/qemu/qemu_command.c:1637: for ( ; a.slot < QEMU_PCI_ADDRESS_SLOT_LAST; a.slot++) {
  maint.mk: incorrect whitespace around brackets, see HACKING for rules
  make: *** [bracket-spacing-check] Error 1

After 78d7c3c5 we are strdup()-ing path to qemu-bridge-helper.
However, the check for its return value is missing. So it is
possible we've ignored the OOM error silently.

Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.

Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add new controller type 'pci' with models 'pci-root' and 'pci-bridge'.

Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.

Pushed under trivial rule.

This patch is to add command line builder and parser
for NVRAM device, and add test cases.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device.
Users are allowed to specify spapr-vio devices'address.
But NVRAM is not supported in libvirt. So this patch is to
add NVRAM device to allow users to specify its address.

In QEMU, NVRAM device's address is specified by
 "-global spapr-nvram.reg=xxxxx".

In libvirt, XML file is defined as the following:

  <nvram>
    <address type='spapr-vio' reg='0x3000'/>
  </nvram>
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

Currently, if there has been an error in building command line
process after virtual interfaces has been created, the flow jumps
to 'error' label, where virDomainConfNWFilterTeardown() is
called. This may report an error as well, but should not
overwrite the original cause why we jumped to 'error' label.

State what fields are used when generating SELinux labels from a
baselabel.

Like what we did for "disk", "filesystem" and "interface", this
introduces sub-element <driver> for "controller", and put the "queues"
into it.

This for example prohibits you to use iotune for Ceph or Sheepdog devices.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.

Instead of a silent warning, it's better to error out if the
numa nodeset is out of range. Just like for numa node larger
than NUMA_NUM_NODES.

Since cbe67ff9
virSecuritySELinuxGenNewContext reports good error messages. Fix callers
that mask the errors by generic error message.

Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.

This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126

With this patch, if the autoport attribute is used, the code will
sensibly auto allocate the ports only if needed.

Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.

eg for the public API   virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The driver.h file has no consistent indentation usage across
all the typedefs. Attempts to vertically align struct field
members have also been inconsistently applied. Sanitize the
whitespace used for typedefs & remove all vertical alignment
from structs
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A number of the remote procedure names did not match the
corresponding API names. For example, many lacked the
word 'CONNECT', others re-arranged the names. Update the
procedures so their names exactly match the API names.
Then remove the special case handling of these APIs in
the generator
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Later on this function will be used to do more sophisticated checks and
determination if port allocation is needed.

Switch the function from a bunch of ifs to a switch statement with
correct type and reflow some code.

Also fix comment in enum describing possible graphics types

Decrease size of qemuBuildGraphicsCommandLine() by splitting out
spice-related code into qemuBuildGraphicsVNCCommandLine().

This patch also fixes 2 possible memory leaks on error path in the code
that was split-out. The buffer containing the already generated options
and a listen address string could be leaked.

Also break a few very long lines and reflow code that fits now.

Decrease size of qemuBuildGraphicsCommandLine() by splitting out
spice-related code into qemuBuildGraphicsSPICECommandLine().

This patch also fixes 2 possible memory leaks on error path in the code
that was split-out. The buffer containing the already generated options
and a listen address string could be leaked.

Also break a few very long lines.

This is a better interface to choose accelerator than guessing whether
we should enable or disable kvm to get the right one.

Currently the RPC protocol files can contain annotations after
the protocol enum eg

   REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES = 247, /* autogen autogen priority:high */

This is not very extensible as the number of annotations grows.
Change it to use

    /**
     * @generate: both
     * @priority: high
     */
   REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES = 247,
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>