1. 09 11月, 2010 15 次提交
    • D
      Support SPICE channel security options · b0ef5c53
      Daniel P. Berrange 提交于
      This extends the SPICE XML to allow channel security options
      
          <graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
            <channel name='main' mode='secure'/>
            <channel name='record' mode='insecure'/>
          </graphics>
      
      Any non-specified channel uses the default, which allows both
      secure & insecure usage
      
      * src/conf/domain_conf.c, src/conf/domain_conf.h,
        src/libvirt_private.syms: Add XML syntax for specifying per
        channel security options for spice.
      * src/qemu/qemu_conf.c: Configure channel security with spice
      b0ef5c53
    • D
      Support multiple QXL video cards · 6794a44b
      Daniel P. Berrange 提交于
      QEMU crashes & burns if you try multiple Cirrus video cards, but
      QXL copes fine. Adapt QEMU config code to allow multiple QXL
      video cards
      
      * src/qemu/qemu_conf.c: Support multiple QXL video cards
      6794a44b
    • D
      Define XML syntax for password expiry · 7a696678
      Daniel P. Berrange 提交于
      This extends the XML syntax for <graphics> to allow a password
      expiry time to be set
      
      eg
      
        <graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
      
      The timestamp is in UTC.
      
      * src/conf/domain_conf.h: Pull passwd out into separate struct
        virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
      * src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
        argument
      * src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
        src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
        struct containing VNC password
      7a696678
    • D
      Add SPICE support for QEMU driver configuration file · b5c99209
      Daniel P. Berrange 提交于
      In common with VNC, the QEMU driver configuration file is used
      specify the host level TLS certificate location and a default
      password / listen address
      
      * src/qemu/qemu.conf: Add spice_listen, spice_tls,
        spice_tls_x509_cert_dir & spice_password config params
      * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
        spice config parameters and updating -spice arg generation
        to use them
      * tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
        tests/qemuxml2argvtest.c: Expand test case to cover driver
        level configuration
      b5c99209
    • D
      Support automatic port number allocation for SPICE · ed0d9f6c
      Daniel P. Berrange 提交于
      * src/qemu/qemu_driver.c: Allocate the TCP ports for SPICE
        before starting guest
      ed0d9f6c
    • D
      Implement QEMU/KVM support for SPICE graphics · 9b57fa65
      Daniel P. Berrange 提交于
      This supports the -spice argument posted for review against
      the latest upstream QEMU/KVM. This supports the bare minimum
      config with port, TLS port & listen address. The x509 bits are
      added in a later patch.
      
      * src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
        -spice availability. Format -spice arg for command line
      * qemuhelptest.c: Add SPICE flag
      * qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
        for spice
      * qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
      * qemuxml2argvtest.c: Add SPICE flag
      9b57fa65
    • D
      Implement QEMU/KVM QXL video card support in QEMU driver · 635f9ca1
      Daniel P. Berrange 提交于
      This supports the '-vga qxl' parameter in upstream QEMU/KVM
      which has SPICE support added. This isn't particularly useful
      until you get the next patch for -spice support. Also note that
      while the libvirt XML supports multiple video devices, this
      patch only supports a single one. A later patch can add support
      for 2nd, 3rd, etc PCI devices for QXL
      
      * src/qemu/qemu_conf.h: Flag for QXL support
      * src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
      * tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
        tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
        tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
        case for generating spice args with RHEL6 kvm
      635f9ca1
    • D
      Add a <graphics> type for SPICE protocol · c909091b
      Daniel P. Berrange 提交于
      This adds an element
      
       <graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>
      
      This is the bare minimum that should be exposed in the guest
      config for SPICE. Other parameters are better handled as per
      host level configuration tunables
      
      * docs/schemas/domain.rng: Define the SPICE <graphics> schema
      * src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
        for SPICE graphics config
      * src/qemu_conf.c: Complain about unsupported graphics types
      c909091b
    • D
      Add a QXL graphics card type to domain XML schema · 3cf5b6f7
      Daniel P. Berrange 提交于
      * src/qemu_conf.c: Add dummy entry in enumeration
      * docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
      * src/domain_conf.c, src/domain_conf.h: Add QXL to video type
        enumerations
      3cf5b6f7
    • D
      Show compiled in options in virsh -V · 5879c15d
      Daniel Veillard 提交于
        To ease debugging this trivial patch allows to find what was compiled
      in in the local version of libvirt, this doesn't work for remote access
      but that's probably sufficient. With the patch I get on my machine:
      
      paphio:~/libvirt/tools -> ./virsh -V
      Virsh command line tool of libvirt 0.8.4
      See web site at http://libvirt.org/
      
      Compiled with support for:
       Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
       Networking: Remote Daemon Network Bridging Netcf Nwfilter
       Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
       Miscellaneous: SELinux Secrets Debug Readline
      paphio:~/libvirt/tools ->
      
      * tools/virsh.c: add -V option
      * tools/virsh.pod: document the extension
      5879c15d
    • J
      maint: Commit .gitignore sorting done by bootstrap · c60c450b
      Jiri Denemark 提交于
      c60c450b
    • J
      qemu: Fix non-literal format string · 0011e917
      Jiri Denemark 提交于
      0011e917
    • M
      xen-proxy: Remove it entirely and use libvirtd instead · e65812d4
      Matthias Bolte 提交于
      Suggested by danpb, as it's not up-to-date anymore and
      lacks many functions that were added to libvirtd.
      e65812d4
    • M
      lxc: Exit on first error in lxcDomainGetMemoryParameters · c3697a0e
      Matthias Bolte 提交于
      There is no point in trying to fill params beyond the first error,
      because when lxcDomainGetMemoryParameters returns -1 then the caller
      cannot detect which values in params are valid.
      c3697a0e
    • M
      Allow virDomainGetMemoryParameters on read-only connections · 9562ca3f
      Matthias Bolte 提交于
      Also fix a typo in the documentation of the function.
      9562ca3f
  2. 08 11月, 2010 8 次提交
    • J
      c690cf83
    • D
      Add a new test for sysinfo and smbios handling · c2000841
      Daniel Veillard 提交于
      c2000841
    • D
      Add sysinfo/smbios support to the QEmu driver · 54c0237c
      Daniel Veillard 提交于
      The patch is based on the possiblity in the QEmu command line to
      add -smbios options allowing to override the default values picked
      by QEmu. We need to detect this first from QEmu help output.
      If the domain is defined with smbios to be inherited from host
      then we pass the values coming from the Host own SMBIOS, but
      if the domain is defined with smbios to come from sysinfo, we
      use the ones coming from the domain definition.
      
      * src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
        value
      * src/qemu/qemu_conf.c: scan the help output for the smbios support,
        and if available add support based on the domain definitions,
        and host data
      * tests/qemuhelptest.c: add the new enum in the outputs
      54c0237c
    • D
      Read the host sysinfo for the QEmu driver · 1e4c4599
      Daniel Veillard 提交于
      Read and store the data when initializing the driver.
      1e4c4599
    • D
      Add a sysinfo util module and read host info API · 778c0976
      Daniel Veillard 提交于
      Move existing routines about virSysinfoDef to an util module,
      add a new entry point virSysinfoRead() to read the host values
      with dmidecode
      
      * src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
        src/util/sysinfo.h: move to a new module, add virSysinfoRead()
      * src/Makefile.am: handle the new module build
      * src/libvirt_private.syms: new internal symbols
      * include/libvirt/virterror.h src/util/virterror.c: defined a new
        error code for that module
      * po/POTFILES.in: add new file for translations
      778c0976
    • D
      Add smbios element to schema and configuration to HVM os · d528b52f
      Daniel Veillard 提交于
      the element has a mode attribute allowing only 3 values:
        - emulate: use the smbios emulation from the hypervisor
        - host: try to use the smbios values from the node
        - sysinfo: grab the values from the <sysinfo> fields
      
      * docs/schemas/domain.rng: extend the schemas
      * src/conf/domain_conf.h: add the flag to the domain config
      * src/conf/domain_conf.h: parse and serialize the smbios if present
      d528b52f
    • D
      Sysinfo parsing and saving to/from configuration files · ebb7a0dd
      Daniel Veillard 提交于
      * src/conf/domain_conf.h: defines a new internal type added to the
        domain structure
      * src/conf/domain_conf.c: parsing and serialization of that new type
      ebb7a0dd
    • D
      Sysinfo extension to relax-ng schemas · 5c3611ca
      Daniel Veillard 提交于
      Currently includes a subset of the SMBIOS strings set
      5c3611ca
  3. 06 11月, 2010 2 次提交
  4. 05 11月, 2010 1 次提交
  5. 03 11月, 2010 6 次提交
    • S
      macvtap: libvirtd forgot macvtap dev name when restarted · c4bd44d9
      Stefan Berger 提交于
      During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down.
      
      The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.
      c4bd44d9
    • O
      tests: fix daemon-conf testing failure · d9c75c8d
      Osier Yang 提交于
      libvirtd.conf uses "libvirt" as the value of "unix_sock_group",
      however, group "libvirt" may not exist on the system, in this case
      the case will always fail.
      
      As a solution, replace "libvirt" with "$USER" in "tmp.conf".
      d9c75c8d
    • D
      Fix virPipeReadUntilEOF on more than 1024 bytes of data · 04cbfa4f
      Daniel Veillard 提交于
      virPipeReadUntilEOF is used to read the stdout of exec'ed
      and this could fail to capture the full output and read only
      1024 bytes.
        The problem is that this is based on a poll loop, and in the
      loop we read at most 1024 bytes per file descriptor, but we also
      note in the loop if poll indicates that the process won't output
      more than that on that fd by setting finished[i] = 1.
        The simplest way is that if we read a full buffer make sure
      finished[i] is still 0 because we will need another pass in the
      loop.
      04cbfa4f
    • E
      virterror: supply missing spaces · b50408c1
      Eric Blake 提交于
      * src/util/virterror.c (virErrorDomainName): Always supply
      trailing space if category was present.
      b50408c1
    • E
      xen: work with xen 4.0.1 headers · 8dd22be9
      Eric Blake 提交于
      * src/xen/xen_driver.h (includes): Include main xen headers
      here...
      * src/xen/xs_internal.c (includes): ...rather than in just one of
      the sub-drivers.
      8dd22be9
    • J
      Fix build with polkit 0 · 98b8424e
      Jim Fehlig 提交于
      Commit e8066d53 broke the build with polkit0:
      
      remote.c: In function 'remoteDispatchAuthPolkit':
      remote.c:4177: error: 'rv' undeclared (first use in this function)
      
      Add missing identifier.
      98b8424e
  6. 02 11月, 2010 8 次提交