It should be the command line helper who takes care of the iteration
rather than the caller.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It's pointless to check the same thing multiple times.
Fix the indentation along the way too.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: NHan Han <hhan@redhat.com>

Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Rename qemuBulildFloppyCommandLineOptions into
qemuBuildFloppyCommandLineOptions.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

qemu changed the output field name for the architecture from 'arch' to
'target'. Note the change and fix the code so that the arch-specific
extraction works.

https://bugzilla.redhat.com/show_bug.cgi?id=1598829Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The wraper is quite pointless and also the 'arch' field may depend on
whether query-cpus-fast is used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This function is called from various clean up paths (e.g.
from qemuBuildInterfaceCommandLine). However, depending on the
stage the interface creation process failed at, net->ifname might
still be not filled in when control jumps to cleanup label. If
that is the case return early (avoiding useless error message
produced in virNWFilterBindingLookupByPortDev) as there is no
NWFilter to tear down anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

After 6b770f9a both @netsource and @srcprops are leaked
because of early return introduced in the commit.

==1812== 644 bytes in 4 blocks are definitely lost in loss record 835 of 885
==1812==    at 0x4C2F12F: realloc (vg_replace_malloc.c:785)
==1812==    by 0x8846393: xmlSaveUriRealloc (in /usr/lib64/libxml2.so.2.9.8)
==1812==    by 0x8846B1C: xmlSaveUri (in /usr/lib64/libxml2.so.2.9.8)
==1812==    by 0x5DDA619: virURIFormat (viruri.c:256)
==1812==    by 0x56E941B: qemuBuildNetworkDriveURI (qemu_command.c:781)
==1812==    by 0x56E979A: qemuBuildNetworkDriveStr (qemu_command.c:859)
==1812==    by 0x56F3A0B: qemuBuildSCSIiSCSIHostdevDrvStr (qemu_command.c:4664)
==1812==    by 0x56F3D1F: qemuBuildSCSIHostdevDrvStr (qemu_command.c:4732)
==1812==    by 0x56F57F7: qemuBuildHostdevCommandLine (qemu_command.c:5337)
==1812==    by 0x570303A: qemuBuildCommandLine (qemu_command.c:10376)
==1812==    by 0x57604EE: qemuProcessCreatePretendCmd (qemu_process.c:6649)
==1812==    by 0x11352A: testCompareXMLToArgv (qemuxml2argvtest.c:566)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of simply dumping the list of authors as obtained
from git, we can be a bit smarter and filter out maintainers
so that their names don't appear twice.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

We can't do this in general, but for maintainers we have
the data in AUTHORS.in to use as a source of truth.

This gets rid of several duplicated lines in the generated
AUTHORS file.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The basic mailmap syntax works for simple cases, but
sometimes it requires two entiries or doesn't work at all;
switch to the more complex syntax in those cases.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Based on which of the two files has been updated most
recently, and what name is used for recent commits.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

While technically correct (you have to send patches for
your name to appear on the list) the remark was clearly
intended for a time before AUTHORS was partially generated
from the git log.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

These two examples do not use any definition from config.h, and by
removing it these examples can be compiled standalone.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This commit renames and adds other macros to support aother filesystems
when a reflink is performed. After that, XFS filesystems (and others)
with reflink support will be able to clone.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1565004Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This commit checks for xfs.h library to use XFS_IOC_CLONE which is
defined into that library file. So, after that it is possible to use
thie macro to create reflinks.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12

Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.

  https://bugzilla.redhat.com/show_bug.cgi?id=1598440Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Reported-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.

Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

There are two boolean parameters passed to qemuBuildChrChardevStr,
and soon there will be a third. It will be clearer to understand
from callers' POV if we use named flags instead.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The vhostuser network backend is only supported with the UNIX domain
socket chardev backend, so passing around chardevStdioLogd is not
required.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If the code jump to the cleanup before assigning value to @xml
libvirtd may crash when it tries to free an uninitialized pointer.

backtrace:

0  0x00007ffff428d59c in free () from /lib64/libc.so.6
1  0x00007ffff721314a in virFree (ptrptr=ptrptr@entry=0x7fffc67f1b00) at util/viralloc.c:582
2  0x00007ffff7345ac4 in virDomainConfNWFilterInstantiate (vmname=<optimized out>,
   vmuuid=vmuuid@entry=0x7fffc0181ca8 "߉\237\\۔H\262\206z\340\302f\265\233z", net=<optimized out>,
   ignoreExists=ignoreExists@entry=true) at conf/domain_nwfilter.c:122
3  0x00007fffca5a77f6 in qemuProcessFiltersInstantiate (ignoreExists=true, def=0x7fffc0181ca0) at qemu/qemu_process.c:3028
4  qemuProcessReconnect (opaque=<optimized out>) at qemu/qemu_process.c:7653
5  0x00007ffff72c4895 in virThreadHelper (data=<optimized out>) at util/virthread.c:206
6  0x00007ffff45dcdd5 in start_thread () from /lib64/libpthread.so.0
7  0x00007ffff4305ead in clone () from /lib64/libc.so.6
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1598087

The detach-device-alias never supported --persistent argument.
Drop it from the man page.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1598087

We are mentioning the positive outcome of the function and not
the case when live detaching a device is denied and event is
issued.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1598084

When creating a snapshot with --quiesce an async job is grabbed
and just before executing guest fs-freeze command an agent job is
grabbed. This is achieved by calling

  qemuDomainObjBeginJobInternal(job = QEMU_JOB_NONE,
                                agentJob = QEMU_AGENT_JOB_MODIFY);

Since there already is an async job set on the domain (by the
same thread) qemuDomainNestedJobAllowed(priv, job) is consulted
if @job is allowed by job mask. But this function returns false
(meaning sync @job is not allowed) which leads to a deadlock.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

By using this macro we can avoid boilerplate code to check for arrays of
objects from ESX driver. This replacement was done using the coccinelle
script bellow:

@@
identifier ptr;
@@

-if (!ptr || *ptr) { ... }
+ESX_VI_CHECK_ARG_LIST(ptr);
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>

This macro avoids code duplication when checking for arrays of objects.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

the libvirtd pid file is not match the os process pid number
which is smaller than before.

this would be exist if the libvirtd process coredump or the os
process was killed which the next pid number is smaller.

you can be also edit the pid file to write the longer number than
before,then restart the libvirtd service.
Signed-off-by: NBobo Du <dubo163@126.com>

The commit of 1fff379f forgot comma at the end of the line
rendering the file invalid in syntax.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The same check is done by virNWFilterBindingObjListAdd().  The main
issue with the current code is that if the object already exists we
would leak 'def' because 'obj' would be set and the cleanup code frees
'def' only if 'obj' is NULL.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

    never used outside domain_addr.c
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

SetCreate, SetAddControllers, Reserve

    last uses of these functions outside domain_addr.c removed in commit:
        40c284f0

Assign

    never used outside domain_addr.c

move Assign and Reserve above their first call within domain_addr.c
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Allocate, Validate, SetCreate

    last uses of these functions outside domain_addr.c removed in commit:
        7bdd06b4Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

never used outside domain_addr.c
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The function call esxVI_LookupVirtualMachineByName(occurrence =
OptionalItem) and then checks if @virtualMachine is NULL. If it
is an error is reported. The same result can be achieved by
setting occurrence to RequiredItem.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When reviewing 00d9edfe I've changed proposed patch and
made it to not report error if no domain is found. This is wrong
and the original patch was okay. Thing is, both callers pass
occurrence = OptionalItem so no error message overwriting is done
as I thought initially.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

from src/qemu/qemu_domain_address.c to src/conf/domain_addr.c
and rename to virDomainCCWAddressSetCreateFromDomain

(rename to have Address in full instead of Addr to follow
the naming convention of other virDomainCCWAddress functions)
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

AMD x86 CPUs have two separate ways to mitigate the Speculative Store
Bypass hardware flaw. In current processors only non-architectural MSRs
are available, and so hypervisors must expose a virtualized MSR and CPU
flag "virt-ssbd" (CPUID Function 8000_0008, EBX[25]=1).

In future processors AMD will provide an architectural MSR, indicated by
existance of the CPUID Function 8000_0008, EBX[24]=1, to which QEMU has
given the name "amd-ssbd".

The "amd-ssbd" flag should be used in preference to "virt-ssbd", if it
is available, since it provides improved performance. For virtual
machine configuration, both should be exposed when available, to allow
for maximal guest OS compatibility as not all guests yet support both.

If future processes are not vulnerable to the flaw, this will be
indicated by the existance of CPUID Function 8000_0008, EBX[26]=1,
to which QEMU has given the name "amd-no-ssb".

See also 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
from:

  https://bugzilla.kernel.org/show_bug.cgi?id=199889

Note that neither amd-ssbd or amd-no-ssb will be reported by the kernel
in /proc/cpuinfo. It knows about these CPUID bits and does the right thing,
but doesn't report their existance as distinct flags in /proc/cpuinfo.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently we format the serial, geometry and error policy on the -drive
backend argument.

QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.

We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.

Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>