In one of my previous commits I've introduced code that creates
all devices for given (possible) multipath target. But I've made
a mistake there - the code accesses 'next->path' without checking
if the disk source is local. Note that the 'next->path' is
NULL/doesn't make sense for VIR_STORAGE_TYPE_NVME.

Fixes: a30078cb
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814947Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NSebastian Mitterle <smitterl@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NSebastian Mitterle <smitterl@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Since the removal of gnulib, HAVE_SOCKETPAIR is no more defined, making
these two tests effectively skipped.

Use the same strategy used in other generic library bits, i.e. exclude
the socketpair usage on Windows.

Semi-related change in virnetdaemontest.c to make it build: since
virutil.h does not include unistd.h anymore, we need to include it.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

It seems like CD-ROMs may have no 'fileName' property specified in case
there is nothing configured as attachment for the drive. Hence, make
sure that virVMXParseDisk() do not consider it mandatory anymore,
considering it an empty block cdrom device. Sadly virVMXParseDisk() is
used also to parse disk and floppies, so make sure that a NULL fileName
is handled in cdrom- and floppy-related paths.

https://bugzilla.redhat.com/show_bug.cgi?id=1808610Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>

Move earlier the checks for skipping a hard disk when parsing a CD-DROM,
and for skipping a CD-ROM when parsing a hard disk. This should have no
behaviour changes, and avoids to add repeated checks in following
commits.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>

Many calls of qemuMonitorDelObject don't actually check the return value
or report the error from the object deletion itself since they are on
cleanup paths. In some cases this can lead to reporting of spurious
errors e.g. when qemuMonitorDelObject is used to clean up a possibly
pre-existing objects.

Add a new argument for qemuMonitorDelObject which controls whether
the internals report errors from qemu and fix all callers accordingly.

Note that some of the cases on device unplug which check the error code
don't in fact propagate the error to the user, but in this case it is
important to add the log entry anyways for tracing that the device
deletion failed.

https://bugzilla.redhat.com/show_bug.cgi?id=1784040Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In some cases we'll need to check whether there was an error but avoid
reporting an actual libvirt error. Rename qemuMonitorJSONCheckError to
qemuMonitorJSONCheckErrorFull with a new flag to suppress the error
reporting and add a wrapper with the original name so that callers don't
need to be fixed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Eliminate cleanup code by using g_autofree.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use 'g_autoptr' and remove the cleanup label and ret variable.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When changing media we'd attempt to remove the managed pr daemon even if
neither of the images involved in the media change used it. This caused
libvirtd to log a spurious error:

2020-03-18 01:41:19.832+0000: 643207: error : qemuMonitorJSONCheckError:412 : internal error: unable to execute QEMU command 'object-del': object 'pr-helper0' not found

With this patch we completely avoid calling the deletion code.

https://bugzilla.redhat.com/show_bug.cgi?id=1814486Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The loop which checks whether the vcpus are in proper configuration for
the requested hot(un)plug skips the first modified vcpu. This means
that 'firstvcpu' which is used to print the error message in case the
configuration is not suitable would never point to the first modified
vcpu.

In cases such as:

  <vcpu placement='auto' current='5'>8</vcpu>
  <vcpus>
    <vcpu id='0' enabled='yes' hotpluggable='no'/>
    <vcpu id='1' enabled='yes' hotpluggable='no'/>
    <vcpu id='2' enabled='yes' hotpluggable='no'/>
    <vcpu id='3' enabled='yes' hotpluggable='no'/>
    <vcpu id='4' enabled='yes' hotpluggable='no'/>
    <vcpu id='5' enabled='no' hotpluggable='yes'/>
    <vcpu id='6' enabled='no' hotpluggable='yes'/>
    <vcpu id='7' enabled='no' hotpluggable='yes'/>
  </vcpus>

 # virsh setvcpu --config --disable  upstream 1
 error: invalid argument: vcpu '-1' can't be modified as it is followed by non-hotpluggable online vcpus

After this fix the proper vcpu is reported in the error message:

 # virsh setvcpu --config --disable  upstream 1
 error: invalid argument: vcpu '1' can't be modified as it is followed by non-hotpluggable online vcpu

https://bugzilla.redhat.com/show_bug.cgi?id=1611061Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When initializing virQEMUDriverConfig structure we are given the
root directory for possible embed connection. Save it for future
use. While we could get it later from @uri member, it's not as
easy as dereferencing a pointer (virURIParse() +
virURIGetParam() + error reporting).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The check attribute was completely ignored for host-passthrough CPUs
even if they explicitly requested some features to be enabled. For
example, a domain with the following CPU definition

  <cpu mode='host-passthrough' check='full'>
    <feature policy='require' name='svm'/>
  </cpu>

would happily start even when 'svm' cannot be enabled.

Let's call virCPUArchUpdateLive for host-passthrough CPUs with
VIR_CPU_CHECK_FULL to make sure the architecture specific code can
validate the provided virtual CPU against the desired definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1515677Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Adding more checks into the existing if statements would turn them into
an unreadable mess.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The updateLive CPU sub-driver function is supposed to be called only for
a subset of CPU definitions. Let's make it more obvious by turning a
negative test and return into a positive check.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This commit is related to RTC timer device too. HPET is being shared
from host device through `localtime` clock. This timer is available
creating a new timer using `hpet` name.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This commit share host Real Time Clock device (rtc) into LXC containers
to support hardware clock. This should be available setting up a `rtc`
timer under clock section. Since this option is not emulated, it should
be available only for `localtime` clock. This option should be readonly
due to security reasons.

Before:
    root# hwclock --verbose
    hwclock from util-linux 2.32.1
    System Time: 1581877557.598365
    Trying to open: /dev/rtc0
    Trying to open: /dev/rtc
    Trying to open: /dev/misc/rtc
    No usable clock interface found.
    hwclock: Cannot access the Hardware Clock via any known method.

Now:
    root# hwclock
    2020-02-16 18:23:55.374134+00:00
    root# hwclock -w
    hwclock: ioctl(RTC_SET_TIME) to /dev/rtc to set the time failed:
    Permission denied
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Some branches were not covered and thus we didn't catch that the bitmaps
are not re-enabled if nothing is merged into them. Two bitmaps are
necessary to reliably test the case due to hash table ordering.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Tested-by: NDaniel P. Berrangé <berrange@redhat.com>

The function repeatedly checked the first element rather than iterating
through the array.
Reported-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Tested-by: NDaniel P. Berrangé <berrange@redhat.com>

Allocate space also for the terminating NULL.
Reported-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Tested-by: NDaniel P. Berrangé <berrange@redhat.com>

Some of the node device APIs are a little odd because they accept a
virNodeDevicePtr object but are still implemented by the virt drivers.
The first thing the virt drivers need to do is get the XML config
associated with the node device, and that means talking to the node
device driver.

This worked previously because with monolithic libvirtd, both the
virt driver and node device driver were in the same daemon and thus
a single virConnectPtr can talk to both drivers.

With the split daemon world though, the virNodeDevicePtr passed into
the APIs is associated with the QEMU driver virConnectPtr, which has
no ability to invoke APIs against the node device driver. We must thus
get a duplicate virNodeDevicePtr object which is associated with a
virConnectPtr for the node device driver.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The node device APIs are a little unusual because we don't use a
"remote_nonnull_node_device" object on the wire, instead we just
have a "remote_string" for the device name. This meant dispatcher
code generation needed special cases. In doing so we mistakenly
used the virNodeDeviceLookupByName() API which gets dispatched
into the driver, instead of get_nonnull_node_device() which
directly populates a virNodeDevicePtr object.

This wasn't a problem with monolithic libvirtd, as the
virNodeDeviceLookupByName() API call was trivially satisfied
by the registered driver, albeit with an extra (undesirable)
authentication check. With the split daemons, the call to
virNodeDeviceLookupByName() fails in virtqemud, because the
node device driver obviously doesn't exist in that daemon.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Despite their names, the following APIs:

    virNodeDeviceDettach
    virNodeDeviceDetachFlags
    virNodeDeviceReAttach
    virNodeDeviceReset

are all handled by the virt drivers, not the node device driver.
A bug in the RPC generator meant that these APIs were sent to
the nodedev driver for handling. This caused breakage with the
split daemons, since nothing was available to process them.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Commit 7b79ee2f makes assumptions about die_id parsing in
the sysfs that aren't true for Power hosts. In both Power8
and Power9, running 5.6 and 4.18 kernel respectively,
'die_id' is set to -1:

$ cat /sys/devices/system/cpu/cpu0/topology/die_id
-1

This breaks virHostCPUGetDie() parsing because it is trying to
retrieve an unsigned integer, causing problems during VM start:

virFileReadValueUint:4128 : internal error: Invalid unsigned integer
value '-1' in file '/sys/devices/system/cpu/cpu0/topology/die_id'

This isn't necessarily a PowerPC only behavior. Linux kernel commit
0e344d8c70 added in the former Documentation/cputopology.txt, now
Documentation/admin-guide/cputopology.rst, that:

  To be consistent on all architectures, include/linux/topology.h
  provides default definitions for any of the above macros that are
  not defined by include/asm-XXX/topology.h:

  1) topology_physical_package_id: -1
  2) topology_die_id: -1
  (...)

This means that it might be expected that an architecture that
does not implement the die_id element will mark it as -1 in
sysfs.

It is not required to change die_id implementation from uInt to
Int because of that. Instead, let's change the parsing of the
die_id in virHostCPUGetDie() to read an integer value and, in
case it's -1, default it to zero like in case of file not found.
This is enough to solve the issue Power hosts are experiencing.

Fixes: 7b79ee2fSigned-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

During startup the udev node device driver impl uses a background thread
to populate the list of devices to avoid blocking the daemon startup
entirely. There is no synchronization to the public APIs, so it is
possible for an application to start calling APIs before the device
initialization is complete.

This was not a problem in the old approach where libvirtd was started
on boot, as initialization would easily complete before any APIs were
called.

With the use of socket activation, however, APIs are invoked from the
very moment the daemon starts. This is easily seen by doing a

  'virsh -c nodedev:///system list'

the first time it runs it will only show one or two devices. The second
time it runs it will show all devices. The solution is to introduce a
flag and condition variable for APIs to synchronize against before
returning any data.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Don't rely on error check and assign hostname only when non-NULL.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If a block-commit fails we should at least re-enable the bitmaps so that
the operation can be re-tried.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Merge the bitmaps into base of the block commit after the job finishes.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Active layer block commit makes the 'base' image the new top image of
the disk after it finishes. This means that all bitmap operations need
to be handled prior to this happening as we'd lose writes otherwise.

The ideal place is to handle it when pivoting to the new image as only
guest-writes would be happening after this point.

Use qemuBlockBitmapsHandleCommitFinish to calculate the merging
transaction.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

On start of the commit job, we need to disable any active bitmap in the
base. Use qemuBlockBitmapsHandleCommitStart to calculate which and call
the appropriate QMP APIs. We use blockdev-reopen to make the 'base'
writable to disable the bitmaps.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Add an argument to qemuBlockJobDiskNewCommit to propagate the list of
disabled bitmaps into the job data structure.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Use the 'snapshots-synthetic-broken' test data for block-commit.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Test handling of more complex cases of merging bitmaps accross
snapshots.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Add code for testing the two necessary steps of handling bitmaps during
block commit and exercise the code on the test data which we have for
bitmap handling.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

qemuBlockBitmapsHandleCommitStart prepares for disabling the bitmaps in
the 'base' of the commit job so that the bitmaps are not dirtied by the
commit job. This needs to be done prior to start of the commit job.

qemuBlockBitmapsHandleCommitFinish then calculates the necessary merges
that agregate all the bitmaps between the commited images and write them
into the base bitmap.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Set the 'id' field of the backing chain properly so that we can look
up images, and initialize 6 images instead of 10 as we don't use more
currently.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Starting a commit job will require disabling bitmaps in the base image
so that they are not dirtied by the commit job. We need to store a list
of the bitmaps so that we can later re-enable them.

Add a field and status XML handling code as well as a test.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>