It is possible to use block devices with domain save/restore. Upon
failure QEMU unlinks the path being saved to. This isn't good when
it is a block device !

* src/qemu/qemu_driver.c: Don't unlink block devices if save fails

If a transient QEMU crashes during save attempt, then the virDomainPtr
object may be freed. If a persistent QEMU crashes during save, then
the 'priv->mon' field is no longer valid since it will be inactive.

* src/qemu/qemu_driver.c: Fix two crashes when QEMU exits
  during a save attempt

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NGuido Günther <agx@sigxcpu.org>

In particular I was forgetting to take the qemuMonitorPrivatePtr
lock (via qemuDomainObjBeginJob), which would cause problems
if two users tried to access the same domain at the same time.
This patch also fixes a problem where I was forgetting to remove
a transient domain from the list of domains.

Thanks to Stephen Shaw for pointing out the problem and testing
out the initial patch.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This patch adds support for the RARP protocol. This may be needed due to
qemu sending out a RARP packet (at least that's what it seems to want to
do even though the protocol id is wrong) when migration finishes and
we'd need a rule to let the packets pass.

Unfortunately my installation of ebtables does not understand -p RARP
and also seems to otherwise depend on strings in /etc/ethertype
translated to protocol identifiers. Therefore I need to pass -p 0x8035
for RARP. To generally get rid of the dependency of that file I switch
all so far supported protocols to use their protocol identifier in the
-p parameter rather than the string.

I am also extending the schema and added a test case.

changes from v1 to v2:
- added test case into patch

With JSON qemu monitor, we get a STOP event from qemu whenever qemu
stops guests CPUs. The downside of it is that vm->state is changed to
PAUSED and a new generic paused event is send to applications. However,
when we ask qemu to stop the CPUs we are not really interested in qemu
event and we usually want to issue a more specific event.

By setting vm->status to PAUSED before actually sending the request to
qemu (and resetting it back if the request fails) we can ignore the
event since the event handler does nothing when the guest is already
paused. This solution is quite hacky but unfortunately it's the best
solution which I was able to come up with and it doesn't introduce a
race condition.

* virStorageEncryptionFormat is called from both
  virDomainDiskDefFormat and virStorageVolTargetDefFormat.  The proper
  indentation in the generated XML depends on the caller.  My earlier
  patch to fix the incorrect indentation for the domain XML broke the
  indentation for the storage XML.  This patch adopts Laine's
  suggestion of requring the caller of virStorageEncryptionFormat to
  provide an unsigned int with the number of spaces the output should
  be indented.  The patch modifies both callers to provide the
  additional argument.

* Add a regression test for the domain XML

* src/conf/domain_conf.c src/conf/storage_conf.c
  src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h:
  change the indentation code
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test

Cygwin's XDR implementation defines xdr_u_int64_t instead of
xdr_uint64_t and lacks IXDR_PUT_INT32/IXDR_GET_INT32.

Alter the IXDR_GET_LONG regex in rpcgen_fix.pl so it doesn't destroy
the #define IXDR_GET_INT32 IXDR_GET_LONG in remote_protocol.x.

Also fix the remote_protocol.h regex in rpcgen_fix.pl.

With this patch I want to enable hex number inputs in the filter XML. A
number that was entered as hex is also printed as hex unless a string
representing the meaning can be found.

I am also extending the schema and adding a test case. A problem with
the DSCP value is fixed on the way as well.

Changes from V1 to V2:

- using asHex boolean in all printf type of functions to select the
output format in hex or decimal format

This patch makes libvirtd start the dnsmasq daemon with a
--dhcp-hostsfile option instead of --dhcp-host options for each
'//ip/dhcp/host' entries defined in network xml file.

the dnsmasq host file is stored into /var/lib/libvirt/network

* src/network/bridge_driver.c: define the directory for the hostfiles
  and save/delete them to be used by dnsmasq

* po/POTFILES.in: the new module contains translatable strings
* src/Makefile.am: include the files in the utils set
* src/libvirt_private.syms: exports the symbols internally

It implements an idea to save dhcp hosts' macaddr vs. ipaddr mappings to
static file and make dnsmasq loading it with "--dhcp-hostsfile" option,
originally suggested by Dan, and can address the problem that too
many "--dhcp-host" args hitting ARG_MAX limit

* src/util/dnsmasq.h src/util/dnsmasq.c: adds the 2 new files

new method generated files are missing from dist tarball.

While doing some testing of the snapshot code I noticed that
if qemuDomainSnapshotLoad failed, it would print a NULL as
part of the error.  That's not desirable, so leave the
full_path variable around until after we are done printing
errors.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

We were freeing the virDomainSnapshotDefPtr, but not
the virDomainSnapshotObjPtr in virDomainSnapshotObjFree.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Cygwin has mntent.h but lacks getmntent_r. Update preprocessor
checks to catch this combination.

The defined __sun is there, because inside_daemon is used in xenUnifiedOpen
if __sun is defined.

It's not needed and is currently ignored, but this is a bug.

It will get fixed soon and QMP will return an error for keys
it doesn't know about, this will break libvirt.

* src/qemu/qemu_monitor_json.c: remove qemuMonitorJSONCommandAddTimestamp()
  and the place where it's invoked in qemuMonitorJSONMakeCommand()

The nwfilterDriverActive() could de-reference a NULL pointer
if it hadn't be started at the point it was called. It was
also not thread safe, since it lacked locking around data
accesses.

* src/nwfilter/nwfilter_driver.c: Fix locking & NULL checks
  in nwfilterDriverActive()

The user probably doesn't care what the gai error numbers are, as
much as what the failed conversion IP address was.

* src/remote/remote_driver.c (addrToString): Mention which address
could not be converted.
* daemon/remote.c (addrToString): Likewise.

* The error messages coming from qemu's DAC support contain strings
  from the original SELinux security driver code.  This just removes
  references to "security context" and other SELinux-isms from the DAC
  code.
Signed-off-by: NSpencer Shimko <sshimko@tresys.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

 - using INT_BUFSIZE_BOUND() to determine the length of the buffersize
for printing and integer into

 - not explicitly initializing static var threadsTerminate to false
anymore, since that's done automatically

Changes after V2:
  - removed while looks in case of OOM error
  - removed on ifaceDown() call
  - preceding one ifaceDown() call with an ifaceCheck() call

Since the name of an interface can be the same between stops and starts
of different VMs I have to switch the IP address learning thread to use
the index of the interface to determine whether an interface is still
available or not - in the case of macvtap the thread needs to listen for
traffic on the physical interface, thus having to time out periodically
to check whether the VM's macvtap device is still there as an indication
that the VM is still alive. Previously the following sequence of 2 VMs
with macvtap device

virsh start testvm1; virsh destroy testvm1 ; virsh start testvm2

would not terminate the thread upon testvm1's destroy since the name of
the interface on the host could be the same (i.e, macvtap0) on testvm1
and testvm2, thus it was easily race-able. The thread would then
determine the IP address parameter for testvm2 but apply the rule set
for testvm1. :-(
I am also introducing a lock for the interface (by name) that the thread
must hold while it listens for the traffic and releases when it
terminates upon VM termination or 0.5 second thereafter. Thus, the new
thread for a newly started VM with the same interface name will not
start while the old one still holds the lock. The only other code that I
see that also needs to grab the lock to serialize operation is the one
that tears down the firewall that were established on behalf of an
interface.

I am moving the code applying the 'basic' firewall rules during the IP
address learning phase inside the thread but won't start the thread
unless it is ensured that the firewall driver has the ability to apply
the 'basic' firewall rules.

* Fix for the bug reported at:

https://bugzilla.redhat.com/show_bug.cgi?id=573908

The hang fix in d376b7d6 was incomplete
since it left quite a few {Enter,Exit}Monitor calls which require driver
to be unlocked. Since the driver is locked throughout the whole
function, {Enter,Exit}MonitorWithDriver need to be used instead to
ensure driver is not locked when issuing monitor commands.

The comment in qemuDomainWaitForMigrationComplete says we are polling
every 50ms but the code sleeps only for 50us. This was already discussed
during review but apparently forgotten when the series was pushed.

The text monitor code was checking for a '\n' prefix on several
places. Previously this would work, but since the monitor code
re-write the '\n' is already stripped off, so mustn't be checked
for.

* src/qemu/qemu_monitor_text.c: Fix monitor error checking

Probably as a result of a merge error, the CPU hotplug command
names were completely wrong.

* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
  the CPU hotplug command names

Adds ability to provide a preferred CPU model for CPUID data decoding.
Such model would be considered as the best possible model (if it's
supported by hypervisor) regardless on number of features which have to
be added or removed for describing required CPU.

So far, when CPUID data were converted into CPU model and features, the
features can only be added to the model. As a result, when a guest asked
for something like "qemu64,-svm" it would get a qemu32 plus a bunch of
additional features instead.

This patch adds support for removing feature from the base model.
Selection algorithm remains the same: the best CPU model is the model
which requires lowest number of features to be added/removed from it.

Qemu committed a patch which list some CPU names in [] when asked for
supported CPUs (qemu -cpu ?). Yet, it needs such CPUs to be passed
without those square braces. When probing for supported CPU models, we
can just strip the square braces and pretend we have never seen them.

First, inital VCPU pinning is set correctly but then it is reset by
assigning qemu process to a new cgroup (which contains all CPUs). It's
easily fixed by swapping these two actions.

Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578347

* src/esx/esx_vi.h: Placate cppi.

An empty root snapshot list was considered as error condition. Creating a
new snapshot would fail if the domain didn't have snapshots yet, because
the snapshot-create function tries to lookup the list of existing snapshots
in order to verify that the snapshot name is unique. This fails if the
domain doesn't have snapshots yet.

Removing the NULL check from esxVI_LookupRootSnapshotTreeList fixes this.