Use virStorageBackendPoolUseDevPath API to determine whether creation of
stable target path is possible for the volume.

This will differentiate a failed virStorageBackendStablePath which won't
need to be fatal. Thus, we'll add a -2 return value to differentiate that
the failure was a result of either the inability to find the symlink for
the device or failure to open the target path directory

Fix the if (!STRPREFIX(path, "/dev")) to be if (!STRPREFIX(path, "/dev/"))
to ensure a path such as "/device" isn't declared stable.

For virStorageBackendStablePath, in order to make decisions in other code
split out the checks regarding whether the pool's target is empty, using /dev,
using /dev/, or doesn't start with /dev

Commit 70f44663 (from 2008) introduced
some functions for testing whether xend was returning correct sound
models.  Those functions have long gone, but the function prototypes
remain.  This commit removes the unused prototypes.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

So, in the example the cpu stats are collected within a function
called do_top. At the beginning of the function we ask the daemon for
how much vCPUs can we get stats, and how many stats for a vCPU can we
get. This is because it's how our API works - users are required to
preallocate a chunk of memory for the results. Now, at the end, we try
to free the allocated array, but we are not doing it correctly.
There's this virTypedParamsFree() function which gets a pointer to the
array and the length of the array. However, if there was an error in
getting vCPU stats we pass a negative number instead of the originally
computed value. This flaw results in SIGSEGV:

libvirt: QEMU Driver error : Requested operation is not valid: domain is not running
ERROR do_top:333 : Unable to get cpu stats
==29201== Invalid read of size 4
==29201==    at 0x4F1DF8B: virTypedParamsClear (virtypedparam.c:1145)
==29201==    by 0x4F1DFEB: virTypedParamsFree (virtypedparam.c:1165)
==29201==    by 0x4023C3: do_top (domtop.c:349)
==29201==    by 0x40260B: main (domtop.c:386)
==29201==  Address 0x131cd7c0 is 16 bytes after a block of size 768 alloc'd
==29201==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29201==    by 0x401FF1: do_top (domtop.c:295)
==29201==    by 0x40260B: main (domtop.c:386)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.

This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.

The strange logic here is just to duplicate the previous behavior,
which parts of the test suite are currently relying on.

Just move this code to where we parse virtType. Lots of things depend
on os.type values so it should be handled early like virtType.

This is a helper function to look up all capabilities data for all
the OS bits that are relevant to <domain>. This is

- os type
- arch
- domain type
- emulator
- machine type

This will be used to replace several functions in later commits.

Rather than an opencoded string. This should be a no-op

But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.

When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:

- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went

Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.

https://bugzilla.redhat.com/show_bug.cgi?id=1043572

If no <os><type> was specified:
  before: unknown OS type no OS type
  after : xml error: an os <type> must be specified

If an <os><type> is specified that's not in our capabiliities data:
  before: unknown OS type: $type
  after : unsupported configuration: no support found for os <type> '$type'

VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.

In Parallels we do not support device name hints
aka <target dev=../> option and full-fledged device
disk device addressing through
<address type=.. controller=.. bus=.. target=.. unit=../>
and have only one index instead.
In this situation to be consistent we can only take
one-to-one mapping from some reasonable subset
of full address. Values outside this subset are
invalid to create Parallels VMs.

Reasonable mapping is default one defined in virDomainDiskDefAssignAddress.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

We should return VIR_DRV_OPEN_ERROR in case
if we handle scheme in query but some
error occur. Previously we sometimes
return VIR_DRV_OPEN_DECLINE.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Unknown
 failure in libvirt_lxc startup

Return success when there are no cpuset.mems to be set,
instead of failing without setting an error.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Invalid value '1-3'
 for 'cpuset.mems': Invalid argument

Free the cpu mask to avoid reusing it as a mem mask
in virCgroupSetCpusetMems
if virDomainNumatuneMaybeFormatNodeset does not set a mask.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

it might be worth having sgio attribute defined in a separate block the same way
as rawio attribute.

According to docs, using 'lun' as a value for device attribute is only valid
with disk types 'block' and 'network'. However current RNG schema also allows
a combination type='file' device='lun' which results in a successfull
xml validation, but fails at qemuBuildCommandLine.
Besides fixing the RNG schema, this patch also adds a qemuxml2argvtest
for this case.

https://bugzilla.redhat.com/show_bug.cgi?id=1210669

https://bugzilla.redhat.com/show_bug.cgi?id=1209948

So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use the same pattern for all machine types on all archs and same archs
for hvm and exe types.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When a qemu domain is to be rebooted, from outside, at libvirt
level it looks like regular shutdown. To really restart the
domain, libvirt needs to issue reset command on the monitor once
SHUTDOWN event appeared. So, in order to differentiate bare
shutdown and reboot libvirt uses a variable within domain private
data. It's called fakeReboot. When the reboot API is called, the
variable is set, but when the shutdown API is called it must be
cleared out. But it was not for every possible case. So if user
called virDomainReboot(), and there was no ACPI daemon running
inside the guest (so guest didn't initiated shutdown sequence)
and then virDomainShutdown(mode=agent) was called bad thing
happened. We remembered the fakeReboot and instead of shutting
the domain down, we just rebooted it.
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NWang Yufei <james.wangyufei@huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is a simple wrapper around virNetDevBandwidthManipulateFilter() that
will update the desired filter on an interface (usually a network bridge)
with a new MAC address. Although, the MAC address in question usually
refers to some other interface - the one that the filter is constructed
for. Yeah, hard to parse. Thing is, our NATed network has a bridge where
some part of QoS takes place. And vNICs from guests are plugged into
the bridge. However, if a guest decides to change the MAC of its vNIC,
the corresponding qemu process emits an event which we can use to
update the QoS configuration based on the new MAC address.. However,
our QoS hierarchy is currently not notified, therefore it falls apart.
This function (when called in response to the aforementioned event)
will update our QoS hierarchy and duct tape it together again.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Not only this simplifies the code a bit, it prepares the
environment for upcoming patches. The new
virNetDevBandwidthManipulateFilter() function is capable of both
removing a filter and adding a new one. At the same time! Yeah,
this is not currently used anywhere but look at the next commit
where you'll see it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, when constructing traffic shaping rules, the ingress
filter is created without any priority specified on the command
line. This makes kernel to make up one. While this works, it
simplifies things a bit if we provide the filter priority. In
this case, since it's the root filter lets give it the highest
priority of number 1.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

After a3609121 the formatting of virDomainActualNetDefPtr was
changed a bit. However, during the function rewrite, iface's class_id
is not formatted as frequently as it could be. In fact, after rewrite
it's formatted only for iface of type VIR_DOMAIN_NET_TYPE_DIRECT where
it makes no sense and is unused. While where needed (_TYPE_NETWORK) is
not formatted at all. This makes the daemon forget it upon daemon
restart resulting in bad behaviour.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1211436

This reverts commit b7829f95.

The previous fix was not correct. Like everywhere else, a driver is a
global variable allocated in stateInitialize function (or something
similar for stateless drivers). Later, when a driver API is called,
it's possible that the global variable is accessed and dereferenced.
Now, some drivers require root privileges because they undertake some
actions reserved only for the system admin (e.g. manipulating host
firewall). And here's the trouble, the NWFilter state initializer
exited too early when finding out it's running unprivileged, leaving
the global NWFilter driver variable uninitialized. Any subsequent
API call that tried to lock the driver resulted in dereferencing the
driver and thus crash.

On the other hand, in order to not resurrect the bug the original
commit was fixing, Let's forbid the nwfilter define in session mode.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Conflicts:
	src/nwfilter/nwfilter_driver.c: Context. Code changed a bit
        since 2013.

There is a possibility that we jump onto error label with @lockpath
still initialized to NULL. Here, the @lockpath should be unlink()-ed,
but passing there a NULL is not a good idea. Don't do that. In fact,
we should call unlink() only if we created the lock file successfully.
Reported-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The 802.11 interfaces can not be moved by themselves, their Phy has to move too.

If there are other interfaces, they have to move too -- hopefully it's not too
confusing. This is a less-invasive alternative to defining a new hostdev type
for PHYs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A destroy operation can take considerable time on large memory
domains due to scrubbing the domain's memory.  Unlock the
virDomainObj while libxl_domain_destroy is executing.

Implement libxlDomainDestroyInternal wrapper to handle unlocking,
calling destroy, and locking.  Change all callers of
libxl_domain_destroy to use the wrapper.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

A job should be acquired at the beginning of a domain destroy operation,
not at the end when cleaning up the domain.  Fix two occurrences of this
late job acquisition in the libxl driver.  Doing so renders
libxlDomainCleanupJob unused, so it is removed.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Let callers of libxlDomainStart decide when it is appropriate to
acquire a job on the associated virDomainObj.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

In xl config, hvmloader is implied for hvm guests.  It is not
specified with the "kernel" option like xm config.  The "kernel"
option, along with "ramdisk" and "extra", is used for HVM direct
kernel boot.  Instead of using "kernel" option to populate
virDomainDef object's os.loader->path, use hvmloader discovered
when gathering capabilities.

This change required fixing initialization of capabilities in
the test utils and removing 'kernel = "/usr/lib/xen/boot/hvmloader"'
from the test config files.

xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.

Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config.  An unfortunate fallout is reordering of entries
in the test config files.

device_model is parsed in xenParseOS(), then later in
xenParseConfigCommon().  <emulator> is not part of <os>,
so makes sense to remove the parsing in xenParseOS().