The 'pipe' character type wasn't documented.
TCP uses a <protocol> element, not <wire>
We weren't doing strict validation for protocol and source mode values.

If the qemu_driver was not initialized (possibly due to an error on driver
startup), we can segfault if attempting to connect to the URI.

When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script.  With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status.  If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.

* autogen.sh: Use "autoreconf -if" instead of open-coding it with
manual and unconditional invocation of each separate tool.

* src/domain_conf.c: replace open coded chr type parsing with
  virDomainChrTypeFromString(), retaining the existing semantics
  where unknown types are silently mapped to the "null" type and
  "pty" is used if none is specified

We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.

* src/domain_conf.c: handle formatting and parsing unix monitors

* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
  pty path searching from qemudFindCharDevicePTYs(), switch
  qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
  monitor

* tests/qemuxml2argvtest.c: switch to using a unix monitor

* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data

There are no functional changes in this patch apart from adding the
monitor type to the state XML.

The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.

* src/domain_conf.h: replace monitorpath with monitor_chr

* src/domain_conf.c: handle parsing the monitor type and initializing
  monitor chr

* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
  virDomainChrDefPtr and use that to build the -monitor parameter

* src/qemu_driver.c: split pty specific and common code from
  qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr

* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change

* src/qemu_driver.c: use a consistent coding style for function
  definitions

* src/qemu_driver.c: vm->monitorpath is already initialized in the case
  of re-connect, so move the initialization for the normal startup case
  out of the common code

* gnulib: Update submodule to latest.
This fixes the make syntax-check failure whereby sc_po_check
would complain about cfg.mk.

* .x-sc_avoid_if_before_free: Ignore *all* ChangeLog files,
now, including ChangeLog-old.

* Makefile.am: List -I m4 first, in ACLOCAL_AMFLAGS
* .gitignore: ignore gnulib/, ChangeLog, *rej, *orig, *#*# (emacs
  temporary files)

* README-hacking: New file.
* bootstrap: Remove obsolete comments.

* Makefile.am (ACLOCAL_AMFLAGS): Search gnulib/m4/ before m4/.

No longer maintain a version-controlled ChangeLog file, but do
continue to include a ChangeLog file in distribution tarball.
* Makefile.am (gen-ChangeLog): New rule.
(dist-hook): Depend on it.
(EXTRA_DIST): Add ChangeLog-old.
* bootstrap (modules): Add gitlog-to-changelog.
* ChangeLog: Remove file.  Renamed to...
* ChangeLog-old: ...this.  New file.
* autogen.sh: Touch ChangeLog, to ensure it exists.  For automake.

* bootstrap (modules): Add gnumakefile and maintainer-makefile.
* GNUmakefile: Remove file, now provided by gnulib.
* Makefile.maint: Remove.  Replaced by maint.mk from gnulib.
.gitignore: Add GNUmakefile and maint.mk.
* cfg.mk (prev_version_file): Disable this feature.
Setting this to /dev/null avoids an otherwise harmless diagnostic.

This makes it so we record (via a git submodule)
a snapshot of whatever version of gnulib we're using,
and none of gnulib sources are in the libvirt repository.
The result is that we have as much reproducibility as when
we version-controlled imported copies of the gnulib sources,
but without the hassle of the manual process we used when
syncing with upstream.

Note that when you clone libvirt, you get only the libvirt
repository, but when you first run ./bootstrap, it clones
gnulib (at the SHA1 recorded via the submodule), creating
the .gnulib/ hierarchy.  Then, the bootstrap script runs
gnulib-tool to populate gnulib/ with the files that make
up the selected modules.

Put the following in your ~/.gitconfig file.
[alias]
  syncsub = submodule foreach git pull origin master

The update procedure is simple:
  git syncsub
  ...build & test...
  git commit -m 'gnulib: sync submodule to latest' .gnulib

* .gitmodules: New file.
* .gnulib: Initialize.
* bootstrap: Set up to use the new submodule.
Stop using --no-vc-files.
Don't remove .gitignore files.
Don't use or create .cvsignore.
Diagnose an invalid --gnulib-srcdir=DIR argument.
* build-aux/vc-list-files: Delete file, now pulled from gnulib.
* build-aux/useless-if-before-free: Likewise.
* po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since
it no longer contains translatable strings.
* gnulib/*: Remove gnulib/ hierarchy.

* cfg.mk (local-checks-to-skip): Add these: sc_error_message_uppercase,
sc_program_name, sc_require_test_exit_idiom, sc_makefile_check.

Since Makefile.maint will soon come from gnulib's maint.mk,
sync Makefile.maint to have the same contents (modulo minor
things).  In syncing it, we have to remove some libvirt-specific
rules.  Since we want to keep them (of course), put those in cfg.mk.
* Makefile.maint: Merge from gnulib's maint.mk.
* cfg.mk (sc_avoid_write): New rule.  From Makefile.cfg.
(sc_prohibit_strcmp_and_strncmp): Likewise, and rename.
(sc_prohibit_asprintf, sc_prohibit_VIR_ERR_NO_MEMORY): Likewise.
(sc_prohibit_nonreentrant): Likewise.
(sc_prohibit_ctype_h): Likewise.
(sc_TAB_in_indentation, sc_avoid_ctype_macros): Likewise.
(sc_prohibit_virBufferAdd_with_string_literal): Likewise.
(sc_prohibit_gethostby): Likewise.
(sc_libvirt_unmarked_diagnostics): Likewise.  Also, rename the
rule, inserting "_libvirt", since this rule is a specialization of
the one in gnulib.
* GNUmakefile: Include cfg.mk, not Makefile.cfg
* .x-sc_prohibit_strcmp_and_strncmp: New file.
* Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_strcmp_and_strncmp

* cfg.mk: ...this.  New file.

Don't use mylibtool, (subsumed by automake's silent rules)
Its use was causing a non-srcdir build to fail.
* Makefile.am (EXTRA_DIST): Remove mylibtool.
* configure.in: Don't use mylibtool.

* configure.in: Use AM_SILENT_RULES([yes]),
but only if that m4 macro is defined.
Thus, it works even on systems that lack automake-1.11.
Daniel Berrange suggested adding the conditional, so that
we don't have a hard requirement on 1.11, e.g., for RHEL5.

It failed in a non-srcdir build because those 5 sample output
files were not included in the distribution tarball.  Include them.
* tests/Makefile.am (qemuhelpdata, EXTRA_DIST): Include these:
kvm-74, kvm-86, qemu-0.10.5, qemu-0.9.1, qemu-kvm-0.10.5.

* docs/Makefile.am (xml): Distribute testpool.xml and testvol.xml,
which are referenced from testnode.xml.

	* tests/testutils.c: Don't discard stderr when running
	external programs during tests

	* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests

 * docs/schemas/domain.rng: Define <video> element schema
 * src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
   Add parsing and formatting for <video> element

* src/network_driver.c src/node_device.c src/storage_driver.c:
  many places in the code reported 'No xxx with matching name" after
  a Lookup error without reporting the name used by the failed lookup

* src/storage_conf.c src/storage_conf.h: adds glusterfs to the list
  of network storage
* libvirt.spec.in: adds the dependency on glusterfs-client

* src/qemu_conf.c: when connecting an interface if it reference
  an undefined network, then we used to raise an internal error.

* docs/downloads.html[.in]: update the secton about
the server on git.et.redhat.com based on the plans
Jim posted.

* docs/examples/python/domstart.py python/tests/create.py:
The two example were broken as they needed full-access connection
but only opened read-only connections

* docs/downloads.html docs/downloads.html.in: update download
  informations after switch to git
daniel

* configure.in libvirt.spec.in NEWS docs/* po/*: release of
  libvirt-0.6.5
* .gitignore: adding cscope files
Daniel

* src/qemu_conf.c: patch from C.J. Adams-Collier adding support
  for arm emulation if qemu-system-arm is present
daniel

Fixes startup of guest's with sourceless cdrom devices.

Patch from Cole Robinson originally posted here:

  https://bugzilla.redhat.com/499569

but never sent upstream.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>

As pointed out by Tim Waugh here:

  https://bugzilla.redhat.com/507555

We shouldn't bother trying to set the context of a file if it already
matches what we want.

(Fixed to use STREQ() and not use tabs, as pointed out by danpb)
Signed-off-by: NMark McLoughlin <markmc@redhat.com>

This patch was posted ages ago here:

  https://bugzilla.redhat.com/493692

But was never posted upstream AFAICT.

Patch from Dan Berrange
Signed-off-by: NMark McLoughlin <markmc@redhat.com>

* docs/schemas/network.rng: fix the network schemas to match
  new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
  in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel

* src/node_device.c: fix an endless loop in node device XML dump,
  patch by Cole Robinson
Daniel