This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.

ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}

V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).

The indentation on the final lines of the function was off by four
spaces, making me wonder for a second if there was something
missing. (There wasn't.)

Absence of this stub function caused a build failure on mingw32.

If we need to virFork() to check assess() under different
UID+GID we need to translate returned status via WEXITSTATUS().
Otherwise, we may return values greater than 255 which is
obviously wrong.

Scaling an integer based on a suffix is something we plan on reusing
in several contexts: XML parsing, virsh CLI parsing, and possibly
elsewhere.  Make it easy to reuse, as well as adding in support for
powers of 1000.

* src/util/util.h (virScaleInteger): New function.
* src/util/util.c (virScaleInteger): Implement it.
* src/libvirt_private.syms (util.h): Export it.

Overflow can be user-induced, so it deserves more than being called
an internal error.  Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).

* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.

ATTRIBUTE_UNUSED was accidentally forgotten on one arg of a stub
function for functionality that's not present on non-linux
platforms. This causes a non-linux build with
--enable-compile-warnings=error to fail.

* For now, only "cpu_time" is supported.
* cpuacct cgroup is used for providing percpu cputime information.

* src/qemu/qemu.conf     - take care of cpuacct cgroup.
* src/qemu/qemu_conf.c   - take care of cpuacct cgroup.
* src/qemu/qemu_driver.c - added an interface
* src/util/cgroup.c/h    - added interface for getting percpu cputime
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

I'm building on OSX with no libnl. I had to do this to get src/util/virnetlink.c to compile:

This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:

 - removes some netlink functions which are now available in
   virnetdev.c

 - Adds a vf argument to all port profile functions.

For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.

For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

This patch adds the following:

- functions to set and get vf configs
- Functions to replace and store vf configs (Only mac address is handled today.
  But the functions can be easily extended for vlans and other vf configs)
- function to dump link dev info (This is moved from virnetdevvportprofile.c)
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

pciDeviceGetVirtualFunctionInfo returns pf netdevice name and virtual
function index for a given vf. This is just a wrapper around existing functions
to return vf's pf and vf_index with one api call

pciConfigAddressToSysfsfile returns the sysfile pci device link
from a 'struct pci_config_address'
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

Commit e3ba4025 introduced a few build errors with HAVE_LIBNL undefined.

Commit 723d5c (added after the release of 0.9.10) adds a
NetlinkEventClient for each interface sent to
virNetDevMacVLanCreateWithVPortProfile. This should only be done if
the interface actually *has* a virtPortProfile, otherwise the event
handler would be a NOP. The bigger problem is that part of the setup
to create the NetlinkEventClient is to do a memcpy of virtPortProfile
- if it's NULL, this triggers a segv.

This patch just qualifies the code that adds the client - if
virtPortProfile is NULL, it's skipped.

With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.

When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).

In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.

In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.

This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.

There is no other behavioral change created by this patch.

Nuke the last vestiges of printing pid_t values with the wrong
types, at least in code compiled on mingw64.  There may be other
places, but for now they are only compiled on systems where the
existing %d doesn't trigger gcc warnings.

* src/rpc/virnetsocket.c (virNetSocketNew): Use %lld and casting,
rather than assuming any particular int type for pid_t.
* src/util/command.c (virCommandRunAsync, virPidWait)
(virPidAbort): Likewise.
(verify): Drop a now stale assertion.

No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'.  Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.

Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.

* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.

Commit 7c90026d added #include "conf/domain_conf.h" to
util/virrandom.c. Fortunately it didn't actually use anything from
domain_conf.h, since as far as I'm aware, files in util aren't allowed
to reference anything in conf (although the opposite is allowed). So
this #include is unnecessary.

I verified it still compiles with the line removed, but have placed a
one day moratorium on me doing any "trivial rule" pushes, so will
wait for someone else to verify/ACK before pushing.

Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

This code adds a netlink event interface to libvirt.
It is based upon the event_poll code and makes use of
it. An event is generated for each netlink message sent
to the libvirt pid.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

This hook is called during the Prepare phase on destination host and may
be used for changing domain XML.

Hooks may now be used as filters.

* src/util/event_poll.c: (virEventPollRunOnce): s/imeout/timeout/.
Signed-off-by: NAlex Jia <ajia@redhat.com>

This patch changes behavior of virPidFileRead to enable passing NULL as
path to the binary the pid file should be checked against to skip this
check. This enables using this function for reading files that have same
semantics as pid files, but belong to unknown processes.

Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.

File changes:
 - src/util/viruri.h        -- declaration
 - src/util/viruri.c        -- definition
 - src/libvirt_private.syms -- symbol export
 - src/Makefile.am          -- added source and header files
 - cfg.mk                   -- added sc_prohibit_xmlURI
 - all others               -- ID name and include fixes

[forwarding this here from RH bug #796732]

When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:

error: Failed to create network from foo.xml
error: missing domain name information

It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).

I realized that the same message is used for missing name when creating
a domain, network, or device node.

This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code.  The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.

AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.

Despite documentation, if we do fork() parent always returns -1
even if file is accessible. Which is wrong obviously.

* src/util/virfile.h: the virFileWrapperFdFlags being defined as
  a globa variable instead of a type ended up generating a duplicate
  symbol error.
* AUTHORS: added Lincoln Myers

This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr

Some programs, notably dnsmasq, which are writing pidfiles on their
own do append a whitespace character after pid, e.g. '\n'.

Replace calls to fwrite() and fscanf() with more portable-friendly
version, such as snprintf() and virStrToLong().

It breaks the build on Mingw32,  because PRIx64 is coming
from the Win32 headers, but virAsprintf uses the gnulib printf.

The auto-generated WWN comply with the new addressing schema of WWN:

<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>

We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.

Now that no one is relying on the return value being a pointer to
somewhere inside of the passed-in argument, we can simplify the
callers to simply return success or failure.  Also wrap some long
lines and add some const-correctness.

* src/util/sysinfo.c (virSysinfoParseBIOS, virSysinfoParseSystem)
(virSysinfoParseProcessor, virSysinfoParseMemory): Change return.
(virSysinfoRead): Adjust caller.

Mingw32 does not have any truncate() API defined, but it does
have ftruncate(). So replace use of the former with the latter