Test that the 'aio' option is applied correctly for the 'file' protocol
backend and across the backing chain.

The top level disk image would generate the following '-drive' cmdline:

file-backing_basic-aio_threads:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,aio=threads
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-raw-aio_native:
-drive file=/path/to/i.img,format=raw,if=none,id=drive-dummy,cache=none,aio=native
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Test mapping of the 'FAT' disk format to 'vvfat' in qemu.

The top level disk image would generate the following '-drive' cmdline:

dir-fat-readonly.xml:
-drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

dir-fat-floppy.xml
-drive file=fat:floppy:/var/somefiles,if=none,id=drive-dummy,readonly=on
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Formats supporting backing chain such as qed, vmdk, don't have any other
parameters than the backing store and 'qcow' has only encryption params
which will be tested extra. Add this test case so they are covered since
any further test cases will mainly care about 'qcow2' and 'raw'.

The top level disk image would generate the following '-drive' cmdline:

-drive file=/var/lib/libvirt/images/a,format=qed,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Similarly to the 'raw' case add tests for bochs, cloop, dmg, ploop, vdi
vhd, and vpc. Covering all supported non-backing formats.

Note that the JSON name for 'ploop' maps to 'parallels' and 'vhd' maps
to 'vhdx'.

Files added here would result in the followint configs:

file-bochs-noopts.xml:
-drive file=/path/to/i.img,format=bochs,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-cloop-noopts.xml:
-drive file=/path/to/i.img,format=cloop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-dmg-noopts.xml:
-drive file=/path/to/i.img,format=dmg,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-ploop-noopts.xml:
-drive file=/path/to/i.img,format=ploop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-vdi-noopts.xml:
-drive file=/path/to/i.img,format=vdi,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-vhd-noopts.xml:
-drive file=/path/to/i.img,format=vhd,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy

file-vpc-noopts.xml:
-drive file=/path/to/i.img,format=vpc,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Test the JSON props generator with a very simple 'raw' image with no
other options. The node-names for the image are 31 bytes long so that we
validate our node name detector.

The top level disk image would generate the following '-drive' cmdline:

-drive file=/var/lib/libvirt/images/i.img,format=raw,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add a test infrastructure that will allow testing the JSON object
generator used for generating data to use with blockdev-add.

The resulting disk including the backing chain is validated to conform
to the QAPI schema and the expected output files.

The first test cases make sure that libvirt will not allow nodenames
exceeding 31 chars.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The function will be reused in the test code where we don't care much
that the gluster debug level can't be populated from the qemu config.

Set the level only when 'cfg' is passed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It will be used in the qemublocktest.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Remove gnulib from _LDADD and move LDADDS to replace it. Also reformat
the _SOURCES so that they can be easily extended.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

New tests will add new data structures so rename the 'data' structure.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When using blockdev-add and friends, libvirt will need to create also
properties for the qcow2/raw/... format handler in qemu. This patch adds
the infrastructure and implements all formats known to libvirt including
all properties which are expressed at the format level in qemu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Enabling discard for the storage node allows the format drivers to
discard snapshots and other things, while configuration of the format
layer actually decides whether to actually discard data on request from
the host.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This will be required when doing blockdev-add to conform with the
approach qemu choses to create the disks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When used directly with blockdev-add/-blockdev the cache mode will need
to be specified directly for every image rather than just for the disk
itself. This implements the backing options 'direct' and 'no-flush'.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

qemu declares node-name as a 32 byte buffer and silently truncates
anything longer than that. This is unacceptable for libvirt, so we need
to make sure that we won't ever supply a node-name exceeding 31 chars.

Add a function which will do the validation and use it to validate
storage-protocol node names.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.

To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Block storage should actually be passed to qemu via 'host_device' or
'host_cdrom' according to the device type. There were no users of this
behaviour so we thankfully can change it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.

We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add detection mechanism which will allow to check whether a path to a
block device is a physical CDROM drive. This will be useful once we will
need to pass it to hypervisors.

The linux implementation uses an ioctl to do the detection, while the
fallback uses a simple string prefix match.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so
that a 'vvfat' driver is used, which emulates a FAT filesystem
containing the folders.

qemu requires us to add it as a storage layer, since a 'raw' layer is
usually put on top of it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Move it to the validation callback and make it more robust. This will
also put the checks in the correct place to use with -blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

'file' backend in qemu supports few more options than the current
implementation. Extract it so that changes don't pollute the code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Some properties don't make sense to be configured for every single layer
of the backing chain, but to avoid needing to pass the disk structure we
will copy them to the individual virStorageSource.

Zero detection is applied only for the top layer image, while caching
and iomode for all layers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Few things which are currently stored the virDomainDiskDef structure are
actually relevant for the storage source as well. Add the fields with a
note that they are just mirror of the values from the disk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.

All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability is unused since we stopped parsing -help output.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa14>.

Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.

Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Enumerate all the cases and use virReportEnumRangeError.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Since we started assuming QEMU_CAPS_MACHINE_OPT in
commit <69420756>, this function can only be reached
for unsupported virt types.

Replace the call with a virReportError.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We have been checking whether qemu-img supports the -o compat
option by scraping the -help output.

Since we require QEMU 1.5.0 now and this option was introduced in 1.1,
assume we support it and ditch the help parsing code along with the
extra qemu-img invocation.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

No point in testing outdated command lines.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We have two leftover "capabilites" for qemu-img:
QEMU_IMG_BACKING_FORMAT_OPTIONS
QEMU_IMG_BACKING_FORMAT_OPTIONS_COMPAT

The former says we are able to specify the backing format via -o
(which has been the case for a long time now) and the second one
says we can use -o compat to specify the qcow2 version.

Since we require QEMU 1.5.0, we can always assume -o compat,
which was introduced in QEMU 1.1.

Drop the test cases using FMT_OPTIONS which have a FMT_COMPAT
counterpart to prepare for deprecating FMT_OPTIONS (and these flags)
completely.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPrafullkumar Tale <talep158@gmail.com>

Signed-off-by: NLin Ma <lma@suse.com>

Just like the commit 8941c800, It does the similar thing.
Signed-off-by: NLin Ma <lma@suse.com>

Signed-off-by: NLin Ma <lma@suse.com>