- 27 10月, 2016 4 次提交
-
-
由 Ján Tomko 提交于
Commit 19a148b7 dropped the cache from QEMU's private domain object. Assume the callers do not have the cache by default and use a longer name for the internal ones that do. This makes the shorter 'virDomainVirtioSerialAddrAutoAssign' name availabe for a function that will not require the cache.
-
由 Martin Kletzander 提交于
The 'on_shutdown' was the name in Xen, there was never such option in libvirt's domain XML. Reported-by: NRuben Kerkhof <ruben@rubenkerkhof.com> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Sławek Kapłoński 提交于
When user tries to resume already running domain (Qemu or LXC) VIR_ERR_OPERATION_INVALID error should be raised with message that domain is already running. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009008
- 26 10月, 2016 22 次提交
-
-
由 Andrea Bolognani 提交于
Since we're using autoconf to substitute the right value in Makefile.am now, we can use a less generic name without running into circular dependencies.
-
由 Andrea Bolognani 提交于
Adding $(prefix) in Makefile.am, as we were doing, means that it would be prepended even when using --with-ws-plugindir, which is something we don't want to happen. Instead, we add it beforehand but take care that it doesn't get expanded until make is called.
-
由 Andrea Bolognani 提交于
Even when we're building $plugindir ourselves because we can't retrieve it using pkg-config, we still want to strip the prefix, except in that case it would be the same prefix we're using for building libvirt. The fact that $plugindir is missing also doesn't tell us anything about $ws_prefix, so we have to handle the two variables separately.
-
由 Andrea Bolognani 提交于
Keep all variable declarations close together.
-
由 Andrea Bolognani 提交于
Use a separate variable instead of setting it inline for slightly cleaner code.
-
由 Gema Gomez 提交于
Support for virtio disks was added in commit id 'fceeeda2', but not for SCSI drives. Add the secret for the server when hotplugging a SCSI drive. No need to make any adjustments for unplug since that's handled during the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in the qemuDomainDetachDeviceDiskLive switch. Added a test to/for the command line processing to show the command line options when adding a SCSI drive for the guest.
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1300776 Complete the implementation of support for TLS encryption on chardev TCP transports by adding the hotplug ability of a secret to generate the passwordid for the TLS object for chrdev, RNG, and redirdev. Fix up the order of object removal on failure to be the inverse of the attempted attach (for redirdev, chr, rng) - for each the tls object was being removed before the chardev backend. Likewise, add the ability to hot unplug that secret object as well and be sure the order of unplug matches that inverse order of plug. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add the secret object so the 'passwordid=' can be added if the command line if there's a secret defined in/on the host for TCP chardev TLS objects. Preparation for the secret involves adding the secinfo to the char source device prior to command line processing. There are multiple possibilities for TCP chardev source backend usage. Add test for at least a serial chardev as an example.
-
由 John Ferlan 提交于
Commit id '6e6b4bfc' added the object, but forgot the other end.
-
由 John Ferlan 提交于
Need to remove the drive first, then the secobj and/or encobj if they exist. This is because the drive has a dependency on secobj (or the secret for the networked storage server) and/or the encobj (or the secret for the LUKS encrypted volume). Deleting either object first leaves an drive without it's respective objects. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1349898 Add the duration parameters to the virsh input/output for blkdeviotune command and describe them in the pod file. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rework the repetitive lines to add iotune values into easier to read macros. One to handle the SCALED values and one to handle the non scaled values. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add in the block I/O throttling length/duration parameter to the command line if supported. If not supported, fail command creation. Add the xml2argvtest for testing.
-
由 John Ferlan 提交于
Modify _virDomainBlockIoTuneInfo and rng schema to support the _length options for bps/iops throttling values. Document the new values.
-
由 John Ferlan 提交于
Add support for a duration/length for the bps/iops and friends. Modify the API in order to add the "blkdeviotune." specific definitions for the iotune throttling duration/length options total_bytes_sec_max_length write_bytes_sec_max_length read_bytes_sec_max_length total_iops_sec_max_length write_iops_sec_max_length read_iops_sec_max_length
-
由 John Ferlan 提交于
Add the capability to detect if the qemu binary can support the feature to use bps-max-length and friends.
-
由 John Ferlan 提交于
Add new options to allow proving a duration/length in seconds to allow the bps/iops (and friends) to occur: total_bytes_sec_max_length write_bytes_sec_max_length read_bytes_sec_max_length total_iops_sec_max_length write_iops_sec_max_length read_iops_sec_max_length Add continue for compiler hint to return to for control
-
由 John Ferlan 提交于
Create a helper to set the bytes/iops iotune default values based on the current qemu setting for both the live and persistent definitions. NB: This also fixes an unreported bug where the persistent values for *_max and size_iops_sec would be set back to 0 if unrelated persistent values were set.
-
由 John Ferlan 提交于
Since persistent_def is the only place that uses it, let's just keep it closer to where it's used.
-
由 John Ferlan 提交于
This patch will also adjust the qemuMonitorJSONSetBlockIoThrottle error procession so that rather than returning/displaying: "error: internal error: Unexpected error" Fetch the actual error message from qemu and display that
-
由 John Ferlan 提交于
Create a macros to hide all the comparisons for each of the fields. Add a 'continue;' for a compiler hint that we only need to find one this should be similar enough to the if - elseif - elseif logic.
-
由 John Ferlan 提交于
Commit id '2c322378' added the TLS object removal to the DetachChrDevice all when it should have been added to the RemoveChrDevice since that's the norm for similar processing (e.g. disk) Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 25 10月, 2016 10 次提交
-
-
由 Ján Tomko 提交于
After succesfully reading an outdated caps cache from disk, calling virQEMUCapsReset did not properly clear out the calculated host CPU model. This lead to a memory leak when the host CPU model pointer was overwritten later in virQEMUCapsNewForBinaryInternal. Introduced by commit 68c70118.
-
由 Jim Fehlig 提交于
Although the migration port is immediately released in the finish phase of migration, it was never set in the domain private object when allocated in the prepare phase. So libxlDomainMigrationFinish() always released a 0-initialized migrationPort, leaking any allocated port. After enough migrations to exhaust the migration port pool, migration would fail with error: internal error: Unable to find an unused port in range 'migration' (49152-49216) Fix it by setting libxlDomainObjPrivate->migrationPort to the port allocated in the prepare phase. While at it, also fix leaking an allocated port if the prepare phase fails.
-
由 Viktor Mihajlovski 提交于
Added description for new vcpu.<num>.halted statistics value. While there, also added a description for vcpu.<num>.wait and clarified the units displayed for time and wait. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
由 Viktor Mihajlovski 提交于
Extended qemuDomainGetStatsVcpu to include the per vcpu halted indicator if reported by QEMU. The key for new boolean value has the format "vcpu.<n>.halted". Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
由 Viktor Mihajlovski 提交于
Adding a field to the domain's private vcpu object to hold the halted state information. Adding two functions in support of the halted state: - qemuDomainGetVcpuHalted: retrieve the halted state from a private vcpu object - qemuDomainRefreshVcpuHalted: obtain the per-vcpu halted states via qemu monitor and store the results in the private vcpu objects Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: NHao QingFeng <haoqf@linux.vnet.ibm.com> Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Viktor Mihajlovski 提交于
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted flag for both text and JSON monitor. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Laine Stump 提交于
An upcoming commit will remove the "flag" argument from all the calls to reserve the next available address|slot, but I don't want to change the arguments in the hypervisor-agnostic virDomainPCIAddressReserveNext*() functions, so this patch places a simple qemu-specific wrapper around those functions - the new functions don't take a flags arg, but grab it from the device's info->pciConnectFlags.
-
由 Laine Stump 提交于
This function is no longer needed outside of domain_addr.c.
-
由 Laine Stump 提交于
instead of calling virDomainPCIAddressGetNextSlot() (which I want to turn into a local static in domain_addr.c).
-
由 Laine Stump 提交于
There is an existing virDomainPCIAddressReserveNextSlot() which will reserve all functions of the next available PCI slot. One place in the qemu PCI address assignment code requires reserving a *single* function of the next available PCI slot. This patch modifies and renames virDomainPCIAddressReserveNextSlot() so that it can fulfill both the original purpose and the need to reserve a single function. (This is being done so that the abovementioned code in qemu can have its "kind of open coded" solution replaced with a call to this new function).
-
- 24 10月, 2016 4 次提交
-
-
由 Pavel Hrdina 提交于
Since TLS was introduced hostwide for libvirt 2.3.0 and a domain configurable haveTLS was implemented for libvirt 2.4.0, we have to modify the migratable XML for specific case where the 'tls' attribute is based on setting from qemu.conf. The "tlsFromConfig" is libvirt internal attribute and is stored only in status XML to ensure that when libvirtd is restarted this internal flag is not lost by the restart. That flag is used to decide whether we should put *tls* attribute to migratable XML or not. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Add an optional "tls='yes|no'" attribute for a TCP chardev. For QEMU, this will allow for disabling the host config setting of the 'chardev_tls' for a domain chardev channel by setting the value to "no" or to attempt to use a host TLS environment when setting the value to "yes" when the host config 'chardev_tls' setting is disabled, but a TLS environment is configured via either the host config 'chardev_tls_x509_cert_dir' or 'default_tls_x509_cert_dir' Signed-off-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Currently the union has only one member so remove that union. If there is a need to add a new type of source for new bus in the future this will force the author to add a union and properly check bus type before any access to union member. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-