Map is based on existing cases in code where we send suspended
event after changing domain state to paused.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

It always returns true.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Drop the local call in favor of passing in xmlopt.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When adding <migrationSource> I've used a slightly unusual approach. To
allow using the disk source XML parser and formatter convert
<migrationSource> to look like <disk>. This means that <source> will be
added as a subelement of <migrationSource> rather than being formatted
inline.

Conversion from the old format in the parser is very simple as it
involves only moving the XPath context current node slightly if the new
format is found.

The status XML to XML test shows that the upgrade is done correctly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All callers including transitive callers through
virDomainDiskSourceFormatInternal always pass true. Remove the argument.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Using copy_on_read for removable disks is a hassle. It also does not
work for CDROMs at all as the image is supposed to be read-only and we
might ignore it for floppies when they are started as empty. Forbid it
for floppies completely rather than trying to support what probably
nobody is using.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Convert the other string comparisons to use the macro.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Check that the attribute is the same in qemuDomainDiskChangeSupported
in case somebody tries to change it using the UpdateDevice API.

https://bugzilla.redhat.com/show_bug.cgi?id=1601677Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

A macro for comparing string fields of the disk.

https://bugzilla.redhat.com/show_bug.cgi?id=1601677Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

https://bugzilla.redhat.com/show_bug.cgi?id=1601677

This reverts commit 047cfb05
Using numeric comparison on strings means we reject every update
that does include the group name, even if it's unchanged.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Use the common base class virDomainMoment for iterator callbacks
related to snapshots from the qemu code, so that when checkpoint
operations are introduced, they can share the same callbacks.

Simplify the code for qemuDomainSnapshotCurrent by better utilizing
virDomainMoment helpers.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Another step towards making the object list reusable for both
snapshots and checkpoints: the list code only ever needs items that
are in the common virDomainMomentDef base type. This undoes a lot of
the churn in accessing common members added in the previous patch, and
the bulk of the patch is mechanical. But there was one spot where I
had to unroll a VIR_STEAL_PTR to work around changed types.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Pull out the common parts of virDomainSnapshotDef that will be reused
for virDomainCheckpointDef into a new base class.  Adjust all callers
that use the direct fields (some of it is churn that disappears when
the next patch refactors virDomainSnapshotObj; oh well...).

Someday, I hope to switch this type to be a subclass of virObject, but
that requires a more thorough audit of cleanup paths, and besides
minimal incremental changes are easier to review.

As for the choice of naming:
I promised my teenage daughter Evelyn that I'd give her credit for her
contribution to this commit. I asked her "What would be a good name
for a base class for DomainSnapshot and DomainCheckpoint". After
explaining what a base class was (using the classic OOB Square and
Circle inherit from Shape), she came up with "DomainMoment", which is
way better than my initial thought of "DomainPointInTime" or
"DomainPIT".
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

An upcoming patch will rework virDomainSnapshotObjList to be generic
for both snapshots and checkpoints; reduce the churn by adding a new
accessor virDomainSnapshotObjGetDef() which returns the
snapshot-specific definition even when the list is rewritten to
operate only on a base class, then using it at sites that that are
specific to snapshots.  Use VIR_STEAL_PTR when appropriate in the
affected lines.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch finishes the job started in the previous patch, by getting
rid of all direct access to nchildren, first_child, or sibling outside
of the lowest level functions, making it easier to refactor later on.

The lone new caller to virDomainSnapshotObjListSize() checks for a
return != 0, because it wants to handles errors (-1, only possible if
the hash table wasn't allocated) and existing snapshots (> 0) in the
same manner; we can drop the check for a current snapshot on the
grounds that there shouldn't be one if there are no snapshots.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0ef).  This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove().  A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already.  Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot.  Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).

Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.

Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rename it to 'seclabels' and invert the value.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.

This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use VIR_AUTOFREE and saner formatting. No semantic change.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.

Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The firmware selection code will enable the feature if needed.
There's no need to require SMM to be enabled in that case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:

  <os>
    <loader type='rom'/>
    ...
  </os>

To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Move the code that (possibly) generates filename of NVRAM VAR
store into a single function so that it can be re-used later.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The existing behavior for ppc64 guests is to always add a USB
keyboard and mouse combo if graphics are present; unfortunately,
this means any attempt to use a USB tablet will cause both pointing
devices to show up in the guest, which in turn will result in poor
user experience.

We can't just stop adding the USB mouse or start adding a USB tablet
instead, because existing applications and users might rely on the
current behavior; however, we can avoid adding the USB mouse if a USB
tablet is already present, thus allowing users and applications to
create guests that contain a single pointing device.

https://bugzilla.redhat.com/show_bug.cgi?id=1683681Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

While the parser and schema have to accept all possible models,
virtio-(non-)transitional models are only applicable to
type=passthrough and should be otherwise rejected.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Right now, the only callers of qemuDomainSnapshotDiscardAllMetadata()
are right before freeing the virDomainSnapshotObjList, so it did not
matter if the list's metaroot (which points to all the defined root
snapshots) is left inconsistent. But an upcoming patch will want to
clear all snapshots if a bulk redefine fails partway through, in
which case things must be reset.  Make this work by teaching the
existing virDomainSnapshotUpdateRelations() to be safe regardless of
the incoming state of the metaroot (since we don't want to leak that
internal detail into qemu code), then fixing the qemu code to use
it after deleting all snapshots. Additionally, the qemu code must
reset vm->current_snapshot if the current snapshot was removed,
regardless of whether the overall removal succeeded or failed later.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element.  It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing.  Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags.  We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

qemuDomainSnapshotWriteMetadata does not modify the directory name,
and making it const-correct aids in writing an upcoming patch.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

There is a lot of documentation in the comments about how PPC64 handles
passthrough VFIO devices to calculate the @memLockLimit. And more will
be added with the PPC64 NVLink2 support code.

Let's remove the PPC64 code from qemuDomainGetMemLockLimitBytes()
body and put it into a helper function. This will simplify the
flow of qemuDomainGetMemLockLimitBytes() that handles all the other
platforms and improves readability of the PPC64 specifics.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

@passthroughLimit is being calculated even if @usesVFIO is false. After
that, an if-else conditional is used to check if we're going to sum it
up with @baseLimit.

This patch initializes @passthroughLimit to zero and always returns
@memKB = @baseLimit + @passthroughLimit. The conditional is then used to
calculate @passthroughLimit if @usesVFIO == true. This results in some
cycles being spared for the @usesVFIO == false scenario, but the real
motivation is to make the code simpler to add an alternative formula to
calculate @passthroughLimit for NVLink2.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Add <controller type='scsi' model handling for virtio transitional
devices. Ex:

  <controller type='scsi' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"

The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>