We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.

Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.

* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK

* src/libvirt.c: reject private flags in virDomainGetXMLDesc()

* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS

* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
  virDomainSaveStatus

* src/virsh.c: rename interface into iface

* src/libvirt.c: the documented return was wrong

* src/storage_backend_fs.c: Replace = with == for comparison

* src/storage_backend_fs.c: due to Fuse O_DIRECT problem one need
  to mount glusterfs with direct-IO mode, until fixed

* src/vbox/vbox_tmpl.c: reconnecting to vbox:///session was failing

* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
  breaking syntax checking

* src/interface_driver.c src/interface_driver.h: the new driver
* src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
  in the build system and get ti activated by the daemon
* src/libvirt_private.syms: export needed symbols internally

* test.c: includes an interface driver to the test framework

* interface_conf.c interface_conf.h: utilities function usful for
  interface driver like the test interface driver

MAC address of a particular interface may change over time, and the
reduced virInterface object (which contains just name and mac) needs
to reflect these changes. Since we can't modify the mac address of an
existing virInterface (some other thread may currently be using it) we
just create a new virInterface, and let the old one die a dignified
death when its refct goes to 0.
* src/datatypes.c: fix the matching and lifetime of virInterface object
  accordingly

* include/libvirt/virterror.h src/virterror.c: if a driver's
  virInterfaceLookupByMACString() function finds more than one interface
  with the desired MAC Address, this new error is raised.

* src/qemu_driver.c: qemudOpenMonitorUnix() had an uninitialized loop
  counter

* libvirt.spec.in: make a client rpm with shared libs, client binaries
  and resources needed by those, and a small number of fixes and
  cleanups in the spec file.

* docs/Makefile.am ($(top_builddir)/NEWS): Adjust rule to filter
out any trailing blank lines when generating this file.
* NEWS: Regenerate, so that it contains entries for 0.6.5.

* src/virsh.c: a bit of cleanup on previous commit

* src/virsh.c: add a number of interface related commands:
  iface-list, iface-name, iface-mac, iface-dumpxml, iface-define,
  iface-undefine, iface-edit, iface-start and iface-destroy

Unlike the pty monitor (which we know exists since we scrape its path from
stdout), we have no way of knowing that the unix monitor socket should exist/
be initialized. As a result, some of my KVM guests randomly fail to start on
F10 host.

Try to open the unix socket in a 3 second timeout loop. Ignore EACCES (path
does not exist if a first time run) and ECONNREFUSED (leftover socket from
a previous run hasn't been removed yet). Fixes things for me.

With the previous refactoring, this is a simple process, since the global
'CreateBlockFrom' in storage_backend does all the work.

We don't gain any space savings, so skip the detection to speed up
the cloning operation.

Add a 'CreateBlockFrom' in the global storage_backend, which sets up the
destination block device: CopyFromFD does the rest of the cloning.

The CreateRaw function has some 'file' only assumptions, so break the agnostic
cloning bits to a separate function.

Have storage building functions be definitions of
virStorageBackendBuildVolFrom: we will need to do this in the future anyways
if we ever support the flags attribute.

These will be used by other pool cloning implementations.

Break out separate functions for

- Determining the supported '*-img' tool,
- The tool's associated create function,
- Desired function for cloning (CreateXMLFrom).

This will be eventually used to unify cloning across all backends.

We need to unlock the first pool before looking up the second, since the
search locks every pool it checks.

There isn't any way to dictate allocation when creating disk volumes, so
capacity is the only relevant value.

Currently, if no format is specified for a new disk volume, we pass the
invalid value "none" as the FS type to 'parted mkpart'.

There doesn't seem to be a way to have parted not format the drive, so
just default to using 'ext2' in this case: this shouldn't cause any harm,
since we are creating a new partition in the first place.

Remove unneeded target path duplication, which could carelessly dereference
NULL. Make it clear where 'key' is actually filled in.

Typo was breaking 'parthelper -g', preventing disk pool definition.

The code in cfg.mk to detect when the git submodule was out of date
worked most of the time, but not when checked out in a certain way.
* cfg.mk: Extract submodule hash from command output and file,
and compare only that, since the format of the full line may vary.
Reported by Mike Burns, with some diagnosis by Daniel P Berrange.

* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
  src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
  guests. Change user/group ownership on disks/usb/pci devs.
  Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
  username/groupname to user ID / group ID

* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
  and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
  functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
  qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
  qemud/remote_dispatch_table.h src/remote_internal.c: implement the
  client/server side of the RPC

* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
  functions virConnectNumOfDefinedInterfaces and
  virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols

* libvirt.spec.in: we were still using deprecated configure switches

This renames a lot of the methods in the remote driver client
to more accurately reflect their responsibility of IO handling
vs message handling.

Remove redundant error reporting functions which obscured the
filename/line number reporting. Removed code which created a
virDomain/virNetwork object, since those are silently dropped
in error reporting functions now

* src/remote_internal.c: Remove error() and errorf() in favour of
 macros, and remove server_error in favour of direct call

Splits up the 'call' method moving generic IO code out into
separate method to allow it to be easily reused for sending
data streams

* src/remote_internal.c: Split 'call' into two methods, the first
  with same name serializes a set of method arguments into a
  message, the second 'remoteIO' takes a pre-serialized messages,
  sends it and awaits a reply