- 15 4月, 2014 1 次提交
-
-
由 Eric Blake 提交于
In general, we try to make virt-xml-validate tolerant of input elements in any order when possible. However, as written, the RNG grammar did not permit <source> unless there was an explicit type= attribute (even though the C code manages just fine by defaulting to type='file'). After making the attribute optional on the 'file' branch, I noticed that the use of diskspec was now redundant with the branch when no <source> was supplied. View this patch with 'git diff -b' for a better picture of the schema change. * docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of choice, make type='file' default, and still preserve interleave. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml: * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml: New files. * tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml: * tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml: Reorder XML. * tests/qemuxml2xmltest.c (mymain): Cover new files. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 14 4月, 2014 1 次提交
-
-
由 Eric Blake 提交于
Having two tiny files with a couple definitions didn't make as much sense as one common file, especially since I plan to add more definitions and use it in more places. * docs/schemas/storageencryption.rng: Merge this... * docs/schemas/storagefilefeatures.rng: ...and this, into... * docs/schemas/storagecommon.rng: ...this new file. * docs/schemas/Makefile.am (schema_DATA): Reflect renames. * docs/schemas/storagevol.rng: Likewise. * docs/schemas/domaincommon.rng: Likewise. * libvirt.spec.in: Likewise. * mingw-libvirt.spec.in: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 13 3月, 2014 1 次提交
-
-
由 Chunyan Liu 提交于
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver.
-
- 19 2月, 2014 1 次提交
-
-
由 Li Zhang 提交于
There is no keyboard support currently in libvirt. For some platforms (PPC64 QEMU) this makes graphics unusable, since the keyboard is not implicit and it can't be added via libvirt. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 11 2月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Add a new character device backend called 'spiceport' that uses spice's channel for communications and apart from spicevmc can be used as a backend for any character device from libvirt's point of view. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 10 2月, 2014 2 次提交
-
-
由 Peter Krempa 提交于
Add a new <timer> for the HyperV reference time counter enlightenment and the iTSC reference page for Windows guests. This feature provides a paravirtual approach to track timer events for the guest (similar to kvmclock) with the option to use real hardware clock on systems with a iTSC with compensation across various hosts.
-
由 Peter Krempa 提交于
According to the documentation describing various tunables for domain timers not all the fields are supported by all the driver types. Express these in the RNG: - rtc, platform: Only these support the "track" attribute. - tsc: only one to support "frequency" and "mode" attributes - hpet, pit: tickpolicy/catchup attribute/element - kvmclock: no extra attributes are supported Additionally the attributes of the <catchup> element for tickpolicy='catchup' are optional according to the parsing code. Express this in the XML and fix a spurious space added while formatting the <catchup> element and add tests for it.
-
- 21 1月, 2014 1 次提交
-
-
由 Francesco Romani 提交于
spice-server offers an API to disable file transfer messages on the agent channel between the client and the guest. This is supported in qemu through the disable-agent-file-xfer option. This patch exposes this option to libvirt. Adds a new element 'filetransfer', with one property, 'enable', which accepts a boolean. Default is enabled, for backward compatibility. Depends on the capability exported in the first patch of the series. Signed-off-by: NFrancesco Romani <fromani@redhat.com>
-
- 20 1月, 2014 1 次提交
-
-
由 Gao feng 提交于
This patch introduces new xml elements under <blkiotune>, we use these new elements to setup the throttle blkio cgroup for domain. The new blkiotune node looks like this: <blkiotune> <device> <path>/path/to/block</path> <weight>1000</weight> <read_iops_sec>10000</read_iops_sec> <write_iops_sec>10000</write_iops_sec> <read_bytes_sec>1000000</read_bytes_sec> <write_bytes_sec>1000000</write_bytes_sec> </device> </blkiotune> Signed-off-by: NGuan Qiang <hzguanqiang@corp.netease.com> Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
- 11 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
When idmap was added to LXC, we forgot to cover it in the testsuite. The schema was missing an <element> layer, and as a result, virt-xml-validate was failing on valid dumpxml output. Reported by Eduard - Gabriel Munteanu on IRC. * docs/schemas/domaincommon.rng (idmap): Include <idmap> element, and support interleaves. * tests/lxcxml2xmldata/lxc-idmap.xml: New file. * tests/lxcxml2xmltest.c (mymain): Test it. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 1月, 2014 1 次提交
-
-
由 Pranavkumar Sawargaonkar 提交于
AArch64 qemu has similar behavior as armv7l, like use of mmio etc. This patch adds similar bypass checks what we have for armv7l to aarch64. E.g. we are enabling mmio transport for Nicdev. Making addDefaultUSB and addDefaultMemballoon to false etc. V3: - Adding missing domain rng schema for aarcg64 and test case in testutilsqemu.c which was causing test suite failure while running make check. V2: - Added testcase to qemuxml2argvtest as suggested during review comments of V1. V1: - Initial patch. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
- 13 12月, 2013 2 次提交
-
-
由 Hu Tao 提交于
panic device is a device that enables libvirt to receive notification of guest panic event. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Hu Tao 提交于
For example: <address type='isa' iobase='0x505' irq='0x1'/> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 06 12月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1035118 When outputting the XML for the RNG device, the code didn't format the PCI address info. Additionally the schema wasn't expecting the info although it was being parsed and used internally. Fix those mistakes and add test for the PCI info section.
-
- 08 11月, 2013 2 次提交
-
-
由 Peter Krempa 提交于
The linux kernel recently added support for paravirtual spinlock handling to avoid performance regressions on overcomitted hosts. This feature needs to be turned in the hypervisor so that the guest OS is notified about the possible support. This patch adds a new feature "paravirt-spinlock" to the XML and supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in qemu. https://bugzilla.redhat.com/show_bug.cgi?id=1008989
-
由 Ján Tomko 提交于
Use absDirPath instead of absFilePath. https://bugzilla.redhat.com/show_bug.cgi?id=1028107
-
- 15 10月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Change the RelaxNG schema option name so that it can be reused for non-hyperv feature flags.
-
- 09 10月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
Since 76b644c3 when the support for RAM filesystems was introduced, libvirt accepted the following XML: <source usage='1024' unit='KiB'/> This was parsed correctly and internally stored in bytes, but it was formatted as (with an extra 's'): <source usage='1024' units='KiB'/> When read again, this was treated as if the units were missing, meaning libvirt was unable to parse its own XML correctly. The usage attribute was documented as being in KiB, but it was not scaled if the unit was missing. Transient domains still worked, because this was balanced by an extra 'k' in the mount options. This patch: Changes the parser to use 'units' instead of 'unit', as the latter was never documented (fixing persistent domains) and some programs (libvirt-glib, libvirt-sandbox) already parse the 'units' attribute. Removes the extra 'k' from the tmpfs mount options, which is needed because now we parse our own XML correctly. Changes the default input unit to KiB to match documentation, fixing: https://bugzilla.redhat.com/show_bug.cgi?id=1015689
-
- 25 9月, 2013 1 次提交
-
-
由 Laine Stump 提交于
This resolves one of the issues in: https://bugzilla.redhat.com/show_bug.cgi?id=1003983 This device is identical to qemu's "intel-hda" device (known as "ich6" in libvirt), but has a different PCI device ID (which matches the ID of the hda audio built into the ich9 chipset, of course). It's not supported in earlier versions of qemu, so it requires a capability bit.
-
- 18 9月, 2013 1 次提交
-
-
由 Doug Goldstein 提交于
Currently the XML parser already allows the following syntax: <disk type='block' device='cdrom'> <source startupPolicy='optional'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> But it if the dev value is NULL then it would not have the leading "<source ", resulting in invalid XML.
-
- 17 9月, 2013 3 次提交
-
-
由 Aline Manera 提交于
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image. The xml should be as following: <disk type='network' device='cdrom'> <source protocol='tftp' name='/url/path'> <host name='host.name' port='69'/> </source> </disk> Signed-off-by: NAline Manera <alinefm@br.ibm.com>
-
由 Aline Manera 提交于
The ftps protocol is another protocol supported by qemu/KVM while specifying the cdrom ISO image. The xml should be as following: <disk type='network' device='cdrom'> <source protocol='ftps' name='/url/path'> <host name='host.name' port='990'/> </source> </disk> Signed-off-by: NAline Manera <alinefm@br.ibm.com>
-
由 Aline Manera 提交于
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO image. The xml should be as following: <disk type='network' device='cdrom'> <source protocol='https' name='/url/path'> <host name='host.name' port='443'/> </source> </disk> Signed-off-by: NAline Manera <alinefm@br.ibm.com>
-
- 03 9月, 2013 2 次提交
-
-
由 Cole Robinson 提交于
This corresponds to '-sd' and '-drive if=sd' on the qemu command line. Needed for many ARM boards which don't provide any other way to pass in storage.
-
由 Cole Robinson 提交于
And add test cases for a basic working ARM guest.
-
- 02 9月, 2013 1 次提交
-
-
由 Fred A. Kemp 提交于
Add an attribute named 'removable' to the 'target' element of disks, which controls the removable flag. For instance, on a Linux guest it controls the value of /sys/block/$dev/removable. This option is only valid for USB disks (i.e. bus='usb'), and its default value is 'off', which is the same behaviour as before. To achieve this, 'removable=on' (or 'off') is appended to the '-device usb-storage' parameter sent to qemu when adding a USB disk via '-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added to keep track if this option is supported by the qemu version used. Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
- 27 8月, 2013 3 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'> <pcihole64 unit='KiB'>1048576</pcihole64> </controller> It can be used to adjust (or disable) the size of the 64-bit PCI hole. The size attribute is in kilobytes (different unit can be specified on input), but it gets rounded up to the nearest GB by QEMU. Disabling it will be needed for guests that crash with the 64-bit PCI hole (like Windows XP), see: https://bugzilla.redhat.com/show_bug.cgi?id=990418
-
由 Aline Manera 提交于
The ftp protocol is already recognized by qemu/KVM so add this support to libvirt as well. The xml should be as following: <disk type='network' device='cdrom'> <source protocol='ftp' name='/url/path'> <host name='host.name' port='21'/> </source> </disk> Signed-off-by: NAline Manera <alinefm@br.ibm.com>
-
由 Aline Manera 提交于
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support to libvirt as well. The xml should be as following: <disk type='network' device='cdrom'> <source protocol='http' name='/url/path'> <host name='host.name' port='80'/> </source> </disk> Signed-off-by: NAline Manera <alinefm@br.ibm.com>
-
- 26 8月, 2013 1 次提交
-
-
由 Jiri Denemark 提交于
Commit 01b88127 changed aliases for PCI controller devices to "pcie.0" or "pci.%u". Thus device aliases may now contain dots.
-
- 21 8月, 2013 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 07 8月, 2013 1 次提交
-
-
由 Guannan Ren 提交于
Add startupPolicy attribute for harddisk with type "file", "block" and "dir". 'requisite' is not supported currently for harddisk.
-
- 06 8月, 2013 2 次提交
-
-
由 Laine Stump 提交于
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
-
由 Laine Stump 提交于
This controller is implicit on q35 machinetypes. It provides 31 PCIe (*not* PCI) slots as controller 0. Currently there are no devices that can connect to pcie-root, and no implicit pci controller on a q35 machine, so q35 is still unusable. For a usable q35 system, we need to add a "dmi-to-pci-bridge" pci controller, which can connect to pcie-root, and provides standard pci slots that can be used to connect other devices.
-
- 23 7月, 2013 1 次提交
-
-
由 John Ferlan 提交于
There are two ways to use a iSCSI LUN as disk source for qemu. * The LUN's path as it shows up on host, e.g. /dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1 * The libiscsi URI from the storage pool source element host attribute, e.g. iscsi://demo.org:6000/iqn.1992-01.com.example/1 For a "volume" type disk, if the specified "pool" is of iscsi type, we should support to use the LUN in either of above 2 ways. That's why to introduce a new XML tag "mode" for the disk source (libvirt should support iscsi pool with libiscsi, but it's another new feature, which should be done later). The "mode" can be either of "host" or "direct". Use "host" to indicate use of the LUN with the path as it shows up on host. Use "direct" to indicate to use it with the source pool host URI (future patches may support to use network type libvirt storage too, e.g. Ceph)
-
- 16 7月, 2013 1 次提交
-
-
由 John Ferlan 提交于
Add a period in seconds to allow/enable statistics gathering from the Balloon driver for 'virsh dommemstat <domain>'.
-
- 05 7月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
<hyperv> <spinlocks state='off'/> </hyperv> results in: error: XML error: missing HyperV spinlock retry count Don't require retries when state is off and use virXPathUInt instead of virXPathString to simplify parsing. https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
-
- 02 7月, 2013 1 次提交
-
-
由 Gao feng 提交于
This patch introduces new element <idmap> for user namespace. for example <idmap> <uid start='0' target='1000' count='10'/> <gid start='0' target='1000' count='10'/> </idmap> this new element is used for setting proc files /proc/<pid>/{uid_map,gid_map}. This patch also supports multiple uid/gid elements setting in XML configuration. We don't support the semi configuation, user has to configure uid and gid both. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
- 21 6月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
Add new CPU features for HyperV: vapic for virtual APIC support spinlocks for setting spinlock support <features> <hyperv> <vapic state='on'/> <spinlocks state='on' retries='4096'/> </hyperv> </features> https://bugzilla.redhat.com/show_bug.cgi?id=784836
-
- 12 6月, 2013 1 次提交
-
-
由 Claudio Bley 提交于
-