Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX

Sample output now looks like

  TEST: statstest
        ........................................ 40
        ...................................      75  OK
  PASS: statstest
  TEST: qparamtest
        ................................         32  OK
  PASS: qparamtest
  TEST:
        ............                             12  OK

* tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Update
expected output to match, now that we use -mem-prealloc.

* tests/capabilityschematest: Define and use $srcdir.
* tests/domainschematest: Likewise.
* tests/interfaceschematest: Likewise.
* tests/networkschematest: Likewise.
* tests/nodedevschematest: Likewise.
* tests/storagepoolschematest: Likewise.
* tests/storagevolschematest: Likewise.

The MAC addresses with 00:50:56 prefix are split into several ranges:

  00:50:56:00:00:00 - 00:50:56:3f:ff:ff  'static' range (manually assigned)
  00:50:56:80:00:00 - 00:50:56:bf:ff:ff  'vpx' range (assigned by a VI Client)

Erroneously the 'vpx' range was assumed to be larger and to occupy the
remaining addresses of the 00:50:56 prefix that are not part of the 'static'
range.

00:50:56 was used as prefix for generated MAC addresses, this is not possible
anymore, because there are gaps in the allowed ranges. Therefore, change the
prefix to 00:0c:29 which is the prefix for auto generated MAC addresses anyway.

Allow arbitrary MAC addresses to be used and set the checkMACAddress VMX option
to false in case the MAC address doesn't fall into any predefined range.

* docs/drvesx.html.in: update website accordingly
* src/esx/esx_driver.c: set the auto generation prefix to 00:0c:29
* src/esx/esx_vmx.c: fix MAC address range handling and allow arbitrary MAC
  addresses
* tests/vmx2xml*, tests/xml2vmx*: add some basic MAC address range tests

The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection

This appeases a new gnulib-provided "syntax-check".
* daemon/libvirtd.c (main): Use EXIT_FAILURE, not 1.
* proxy/libvirt_proxy.c (main): Likewise, and EXIT_SUCCESS, not 0.
* tests/conftest.c (main): Likewise.
* tests/reconnect.c (main): Likewise.
* tests/testutils.h (EXIT_AM_SKIP): Define.
* tests/nodeinfotest.c (mymain): Use EXIT_AM_SKIP, not 77.
* tests/qemuargv2xmltest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/virshtest.c (mymain): Likewise.

Provides the CDROM label for current media. Only implemented for the
udev backend.

tests/virt-aa-helper-test and examples/apparmor are not included in
official tarballs, but should be. Attached is a patch to fix that
which works when apparmor is and is not available.

Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
  available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
  for all current serial and parallel tests.

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

add a set of tests for Xen interface type and model configurations

esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:

  sdzy -> 700
  sdzz -> 701
  sdaaa -> 728
  sdaab -> 729

This line in virDiskNameToIndex causes this gap:

  idx = (idx + i) * 26;

Fixing it by altering this line to:

  idx = (idx + (i < 1 ? 0 : 1)) * 26;

Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.

* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed

* tests/.valgrind.supp: Ignore capng problems

Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks

Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests

VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.

* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly

* src/security/virt-aa-helper.c: get_definition() now calls the new
  caps_mockup() function which will parse the XML for os.type,
  os.type.arch and then sets the wordsize.  These attributes are needed
  only to get a valid virCapsPtr for virDomainDefParseString(). The -H
  and -b options are now removed from virt-aa-helper (they weren't used
  yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755

Use this function in the qemu, uml, lxc, and test drivers.

allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax

- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)

Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this

* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
  and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
  that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
  return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
  if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()

This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.

This can be used to forward the BOOTP settings of the host down to the
guest.  This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.

* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
  tests/networkxml2xmlout/netboot-proxy-network.xml
  tests/networkxml2xmltest.c: add new tests

This adds simple support for configuring a guest with a QEMU/KVM
virtual hardware watchdog device.

* tests/Makefile.am: networkpoolxml2xmlout and networkpoolxml2xmlin are
  really networkxml2xmlout and networkxml2xmlin

Provide a simple interface for other tests to lookup the testDebug variable.
Also remove a redundant error message in interface tests.

If anyone feels inclined to change this env variable to match the existing
LIBVIRT_* format, it should now be easier to do so.

Otherwise any virRandom calls will result in a segfault.

Introduced in commit 39a7be47.

* tests/*schematest: replace 'source' with '.'
* tests/schematestutils.sh: remove 'function' keyword and add '()'

Move existing schema data to an input directory. Add extra files for more
thorough XML testing.

All schema tests have identical functionality, so avoid the duplication.

If one has e.g.

  <guest>
    <os_type>hvm</os_type>
    <arch name='x86_64'>
      <wordsize>64</wordsize>
      <emulator>/usr/bin/qemu-system-x86_64</emulator>
      <machine>pc-0.11</machine>
      <machine canonical='pc-0.11'>pc</machine>
      <machine>pc-0.10</machine>
      <machine>isapc</machine>
      <domain type='qemu'>
      </domain>
      <domain type='kvm'>
        <emulator>/usr/bin/kvm</emulator>
        <machine>pc</machine>
        <machine>isapc</machine>
      </domain>
    </arch>
  </guest>

and start a guest with:

  <domain type='kvm'>
    ...
    <os>
      <type arch='x86_64'>hvm</type>
      ...
    </os>
  </domain>

then the default machine type should be 'pc' and not 'pc-0.11'

Issue was reported by Anton Protopopov.

* src/capabilities.[ch]: pass the domain type to
  virCapabilitiesDefaultGuestArch() and use it to look up the default
  machine type from a specific guest domain if needed.

* src/conf/domain_conf.c, src/xen/xm_internal.c: update

* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
  the domain type to 'kvm' and remove the machine type to check
  that the default gets looked up correctly

* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'

While running make check, I noticed that it was actually using
the virsh binary from my system, in /usr/bin/virsh, and not the
one that was just compiled.  This is actually caused by a bug
in Makefile.am, where we didn't update the PATH to include tools.

While here, I also updated all of the scripts to properly define
the srcdir, abs_top_srcdir, and abs_top_builddir environment
variables.  This is required if you want to be able to run the
tests standalone (i.e. ./test instead of from make check).  I've
tested this on both RHEL-5 and Fedora-10 machines, and make check
works on both, as does running the individual tests by hand.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
  qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args,
  qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
  qemuxml2argvdata/qemuxml2argv-input-xen.args: Add in
  QEMU_AUDIO_DRV=none env variable

A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.

* src/esx/esx_driver.c: refactor datastore related path parsing into
  esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
  the traversal in esxVI_BuildFullTraversalSpecList(), add
  esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
  to convert a path into a datastore related path, add esxVMX_ParseFileName()
  to convert from VMX path format to domain XML path format, extend the other
  parsing function to be datastore aware, add esxVMX_FormatFileName() to
  convert from domain XML path format to VMX path format, fix VMX ethernet
  entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
  update VMX files to use absolute paths