Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element

  <address .... />

This brings them upto par with disk/net/hostdev devices which
already have address info

* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
  video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
  virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
  with sound, video & watchdog

Introduce a new structure

      struct _virDomainDeviceDriveAddress {
        unsigned int controller;
        unsigned int bus;
        unsigned int unit;
      };

and plug that into virDomainDeviceAddress and generates XML that
looks like

  <address type='drive' controller='1' bus='0' unit='5'/>

This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus

* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
  formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives

All guest devices now use a common device address structure
summarized by:

  enum virDomainDeviceAddressType {
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
  };

  struct _virDomainDevicePCIAddress {
    unsigned int domain;
    unsigned int bus;
    unsigned int slot;
    unsigned int function;
  };

  struct _virDomainDeviceInfo {
    int type;
    union {
        virDomainDevicePCIAddress pci;
    } addr;
  };

This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.

  <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>

The structure definition is based on Wolfgang Mauerer's disk
controller patch series.

* docs/schemas/domain.rng: Define the <address> syntax and
  associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: APIs for parsing/formatting address
  information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
  new standardized format.

Commit 5073aa99 added an additional
'}' to a case block that messed up the block structure of the get_files
function.

* src/xen/xend_internal.c (wr_sync): Correct the diagnostic.

With the introduction virDispatchError, hook function errors are
never sent through the error callback, so users will never see
these messages.

Fix this by calling virDispatchError after hook failure.

Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450

We are setting the same property two different ways without
free'ing in between. Just drop the second assignment.

There are quite a few differences between how udev exposes legacy
and USB floppy devs, but this patch takes care of both variants.

udev doesn't prefix USB product/vendor info with '0x', so the
strtol conversions were wrong for the product field (vendor already
set the correct base). Make the change for PCI product/vendor as
well to be safe.

This fixes USB device assignment via virt-manager.

This allows debug statements and raised errors in hook functions to
actually be logged somewhere (stderr). Users can enable debugging in the
daemon and now see more info in /var/log/libvirt/...

Upstream xen has changed parameters to the migration operation
several times over the past 18 months.  Changeset 17553 removed
the resouce parameter,  Changesets 17709, 17753, and 20326 added
ssl, node, and change_home_server parameters respectively.

Fortunately, testing has revealed that xend will fail the
operation if a parameter is missing but happily honor it if
unknown parameters are provided.  Thus all currently supported
parameters can be provided, satisfying current xend but not
regressing older versions.

This way we won't squash the original error report in
MigratePerform, as is done for P2P and Tunneled migration.

Can be used to re-set an old error, which may have been squashed by
other functions (like cleanup routines). Will be used in subsequent patches

The virRaiseErrorFull() may invoke the error handler callback
functions an application has registered. This is not good
because the connection object may not be available at this
point, and the caller may be holding locks. This creates a
problem if the error handler calls back into libvirt.

The solutuon is to move invocation of the handler into the
final cleanup code in the public API entry points, where it
is guarenteed to have safe state.

* src/libvirt.c: Invoke virDispatchError() in all error paths
* src/util/virterror.c: Remove virSetConnError/virSetGlobalError,
  replacing with virDispatchError(). Move invocation of the
  error callbacks into virDispatchError() instead of the
  virRaiseErrorFull function which is not in a safe context

qemudWaitForMonitor calls qemudReadLogOutput with qemudFindCharDevicePTYs
as callback. qemudFindCharDevicePTYs calls qemudExtractTTYPath to assign
a string to chr->data.file.path. Afterwards qemudWaitForMonitor may call
qemudFindCharDevicePTYsMonitor that overwrites chr->data.file.path without
freeing the old value. This results in leaking the memory allocated by
qemudExtractTTYPath.

Report an OOM error if the strdup in qemudFindCharDevicePTYsMonitor fails.

older kernels such as 2.6.26 have it there.

Only use pseudo-random generator for uuid if using /dev/random fails.
* src/util/uuid.c: The original code. would only print the warning
  message if using /dev/random failed, but would still go ahead and call
  virUUIDGeneratePseudoRandomBytes in all cases anyway.

* src/xen/proxy_internal.c (xenProxyCommand): Mark "request"
as an always-non-NULL parameter.

* src/xen/proxy_internal.c (xenProxyCommand): "res" is known to be
non-NULL at that point, so remove the "res == NULL" guard.

Currently only the faultcode and faultstring are deserialized, the
detail part is ignored. The implementation of many new SOAP types
would be necessary to deserialize the detail part correctly. As an
intermediate solution the raw response is dumped to the debug log.

The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.

* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
  when using large pages

xen-unstable c/s 20685 changed the domctl interface, adding a field to
xen_domctl_getdomaininfo structure.  This additional field causes stack
corruption in libvirt.  xen-unstable c/s 20711 rightly bumped the domctl
interface version so it is at least possible to handle the new field.
This change accounts for shr_pages field added to xen_domctl_getdomaininfo
structure.

* src/network/bridge_driver.c (networkBuildDnsmasqArgv): Correct
test for NULL *argv.

The MAC addresses with 00:50:56 prefix are split into several ranges:

  00:50:56:00:00:00 - 00:50:56:3f:ff:ff  'static' range (manually assigned)
  00:50:56:80:00:00 - 00:50:56:bf:ff:ff  'vpx' range (assigned by a VI Client)

Erroneously the 'vpx' range was assumed to be larger and to occupy the
remaining addresses of the 00:50:56 prefix that are not part of the 'static'
range.

00:50:56 was used as prefix for generated MAC addresses, this is not possible
anymore, because there are gaps in the allowed ranges. Therefore, change the
prefix to 00:0c:29 which is the prefix for auto generated MAC addresses anyway.

Allow arbitrary MAC addresses to be used and set the checkMACAddress VMX option
to false in case the MAC address doesn't fall into any predefined range.

* docs/drvesx.html.in: update website accordingly
* src/esx/esx_driver.c: set the auto generation prefix to 00:0c:29
* src/esx/esx_vmx.c: fix MAC address range handling and allow arbitrary MAC
  addresses
* tests/vmx2xml*, tests/xml2vmx*: add some basic MAC address range tests

The data passed to the callback is not guaranteed to be zero terminated,
take care of that by coping the data and adding a zero terminator.

Also dump the data for other types than CURLINFO_TEXT.

Set CURLOPT_VERBOSE to 1 so the debug callback is called when enabled.

A domain with virtualHW version 4 is allowed on an ESX 4.0 server.
If a domain is migrated from an ESX 3.5 server to an ESX 4.0 server
then the virtualHW version stays the same. So a ESX 4.0 server can
host domains with virtualHW version 4.

This invalid free results in heap corruption. Some symptoms I saw
because of this were libvirtd crashing and virt-manager hanging
while trying to enumerate devices.

* src/xen/xend_internal.c (xenDaemonOpen_unix): Do not dereference
a NULL "conn".  Move first deref to follow the "conn == NULL" test.

The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection

This patch removes the call to vol update after the volume build completes.
The update call is currently meaningless anyway because the vol build is passed
a copy of the definition, so the update result is thrown away.  More
importantly, if the user specified a selinux label for the volume, the update
call results in a double free of the label
* src/storage/storage_backend_fs.c: remove the update call

This change makes the 'info chardev' parser ignore any trailing
whitespace on a line. This fixes a specific problem handling a '\r\n'
line ending.

* src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in
  'info chardev' output.