- 13 7月, 2016 1 次提交
-
-
由 Maxim Perevedentsev 提交于
-
- 18 3月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
We include the file in plenty of places. This is mostly due to historical reasons. The only place that needs something from the header file is storage_backend_fs which opens _PATH_MOUNTED. But it gets the file included indirectly via mntent.h. At no other place in our code we need _PATH_.*. Drop the include and configure check then. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 10 6月, 2015 1 次提交
-
-
由 Shivaprasad G Bhat 提交于
dnsmasq conf file contents needs to have quotes escaped for it to work. Because of this, the network-create/start for a network with quotes in the name fails. The patch escapes strings for the entries that go into the conf file. Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
- 13 3月, 2015 1 次提交
-
-
由 Ján Tomko 提交于
A helper that never returns an error and treats bits out of bitmap range as false. Use it everywhere we use ignore_value on virBitmapGetBit, or loop over the bitmap size.
-
- 15 11月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 20 8月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
And add a syntax-check for '){$'. It's not perfect, but better than nothing. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 25 3月, 2014 1 次提交
-
-
由 Ján Tomko 提交于
-
- 18 3月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
Any source file which calls the logging APIs now needs to have a VIR_LOG_INIT("source.name") declaration at the start of the file. This provides a static variable of the virLogSource type. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 11 7月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Convert the type of loop iterators named 'i', 'j', k', 'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or 'unsigned int', also santizing 'ii', 'jj', 'kk' to use the normal 'i', 'j', 'k' naming Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 10 7月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 24 5月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 03 5月, 2013 1 次提交
-
-
由 Eric Blake 提交于
virAsprintf(&foo, "%s", bar) is wasteful compared to foo = strdup(bar) (or eventually, VIR_STRDUP(foo, bar), but one thing at a time...). Noticed while reviewing Laine's attempt to clean up broken qemu:///session. * cfg.mk (sc_prohibit_asprintf): Enhance rule. * src/esx/esx_storage_backend_vmfs.c (esxStorageBackendVMFSVolumeLookupByKey): Fix offender. * src/network/bridge_driver.c (networkStateInitialize): Likewise. * src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopDHCPOpen): Likewise. * src/storage/storage_backend_sheepdog.c (virStorageBackendSheepdogRefreshVol): Likewise. * src/util/vircgroup.c (virCgroupAddTaskStrController): Likewise. * src/util/virdnsmasq.c (addnhostsAdd): Likewise. * src/xen/block_stats.c (xenLinuxDomainDeviceID): Likewise. * src/xen/xen_driver.c (xenUnifiedConnectOpen): Likewise. * tools/virsh.c (vshGetTypedParamValue): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 02 5月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
The source code base needs to be adapted as well. Some files include virutil.h just for the string related functions (here, the include is substituted to match the new file), some include virutil.h without any need (here, the include is removed), and some require both.
-
- 25 2月, 2013 1 次提交
-
-
由 Gene Czarcinski 提交于
Originally, only a host name was used to associate a DHCPv6 request with a specific IPv6 address. Further testing demonstrates that this is an unreliable method and, instead, a client-id or DUID needs to be used. According to DHCPv6 standards, this id can be a duid-LLT, duid-LL, or duid-UUID even though dnsmasq will accept almost any text string. Although validity checking of a specified string makes sure it is hexadecimal notation with bytes separated by colons, there is no rigorous check to make sure it meets the standard. Documentation and schemas have been updated. Signed-off-by: NGene Czarcinski <gene@czarc.net> Signed-off-by: NLaine Stump <laine@laine.org>
-
- 16 1月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Currently all classes must directly inherit from virObject. This allows for arbitrarily deep hierarchy. There's not much to this aside from chaining up the 'dispose' handlers from each class & providing APIs to check types. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 21 12月, 2012 7 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 18 12月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This is yet another refinement to the fix for CVE-2012-3411: https://bugzilla.redhat.com/show_bug.cgi?id=833033 It turns out that it would be very intrusive to correctly backport the entire --bind-dynamic option to older dnsmasq versions (e.g. dnsmasq-2.48 that is used on RHEL6.x and CentOS 6.x), but very simple to patch those versions to just use SO_BINDTODEVICE on all their listening sockets (SO_BINDTODEVICE also has the desired effect of permitting only traffic that was received on the interface(s) where dnsmasq was set to listen.) This patch modifies the dnsmasq capabilities detection to detect the string: --bind-interfaces with SO_BINDTODEVICE in the output of "dnsmasq --version", and in that case realize that using the old --bind-interfaces option is just as safe as --bind-dynamic (and therefore *not* forbid creation of networks that use public IP address ranges). If -bind-dynamic is available, it is still preferred over --bind-interfaces. Note that this patch does no harm in upstream, or in any distro's downstream if it happens to end up there, but builds for distros that have a new enough dnsmasq to support --bind-dynamic do *NOT* need to specifically backport this patch; it's only required for distro releases that have dnsmasq too old to have --bind-dynamic (and those distros will need to add the SO_BINDTODEVICE patch to dnsmasq, *including the extra string in the --version output*, as well.
-
- 11 12月, 2012 1 次提交
-
-
由 Gene Czarcinski 提交于
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one IPv6 subnetwork on one interface. This support will only work if dnsmasq version >= 2.64; otherwise an error occurs if dhcp-range or dhcp-host is specified for an IPv6 address. Essentially, this change provides the same DHCP support for IPv6 that has been available for IPv4. With dnsmasq >= 2.64, support for the RA service is also now provided by dnsmasq (radvd is no longer used/started). (Although at least one version of dnsmasq prior to 2.64 "supported" IPv6 Router Advertisement, there were bugs (fixed in 2.64) that rendered it unusable.) Documentation and the network schema has been updated to reflect the new support.
-
- 10 12月, 2012 1 次提交
-
-
由 Michal Privoznik 提交于
This reverts commit 51144313 which was pushed accidentally.
-
- 06 12月, 2012 2 次提交
-
-
由 Michal Privoznik 提交于
If debugging is enabled, the debug messages are sent to stderr. Moreover, if a command has catching of stderr set, the messages gets mixed with stdout output (assuming both outputs are stored in the same variable). The resulting string then doesn't necessarily have to start with desired prefix then. This bug exposes itself when parsing dnsmasq output: 2012-12-06 11:18:11.445+0000: 18491: error : dnsmasqCapsSetFromBuffer:664 : internal error cannot parse /usr/sbin/dnsmasq version number in '2012-12-06 11:11:02.232+0000: 18492: debug : virFileClose:72 : Closed fd 22' We can clearly see that the output of dnsmasq --version doesn't start with expected "Dnsmasq version " string but a libvirt debug output.
-
由 Michal Privoznik 提交于
If the debugging is enabled, the virCommand subsystem catches debug messages in the command output as well. In that case, we can't assume the string corresponding to command's stdout will start with specific prefix. But the prefix can be moved deeper in the string. This bug shows itself when parsing dnsmasq output: 2012-12-06 11:18:11.445+0000: 18491: error : dnsmasqCapsSetFromBuffer:664 : internal error cannot parse /usr/sbin/dnsmasq version number in '2012-12-06 11:11:02.232+0000: 18492: debug : virFileClose:72 : Closed fd 22' We can clearly see that the output of dnsmasq --version doesn't start with expected "Dnsmasq version " string but a libvirt debug output.
-
- 30 11月, 2012 1 次提交
-
-
由 Laine Stump 提交于
In order to optionally take advantage of new features in dnsmasq when the host's version of dnsmasq supports them, but still be able to run on hosts that don't support the new features, we need to be able to detect the version of dnsmasq running on the host, and possibly determine from the help output what options are in this dnsmasq. This patch implements a greatly simplified version of the capabilities code we already have for qemu. A dnsmasqCaps device can be created and populated either from running a program on disk, reading a file with the concatenated output of "dnsmasq --version; dnsmasq --help", or examining a buffer in memory that contains the concatenated output of those two commands. Simple functions to retrieve capabilities flags, the version number, and the path of the binary are also included. bridge_driver.c creates a single dnsmasqCaps object at driver startup, and disposes of it at driver shutdown. Any time it must be used, the dnsmasqCapsRefresh method is called - it checks the mtime of the binary, and re-runs the checks if the binary has changed. networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at startup - one "restricted" (doesn't support --bind-dynamic) and one "full" (does support --bind-dynamic). Some of the test cases use one and some the other, to make sure both code pathes are tested.
-
- 21 10月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This fixes the problem reported in: https://bugzilla.redhat.com/show_bug.cgi?id=868389 Previously, the dnsmasq hosts file (used for static dhcp entries, and addnhosts file (used for additional dns host entries) were only created/referenced on the dnsmasq commandline if there was something to put in them at the time the network was started. Once we can update a network definition while it's active (which is now possible with virNetworkUpdate), this is no longer a valid strategy - if there were 0 dhcp static hosts (resulting in no reference to the hosts file on the commandline), then one was later added, the commandline wouldn't have linked dnsmasq up to the file, so even though we create it, dnsmasq doesn't pay any attention. The solution is to just always create these files and reference them on the dnsmasq commandline (almost always, anyway). That way dnsmasq can notice when a new entry is added at runtime (a SIGHUP is sent to dnsmasq by virNetworkUdpate whenever a host entry is added or removed) The exception to this is that the dhcp static hosts file isn't created if there are no lease ranges *and* no static hosts. This is because in this case dnsmasq won't be setup to listen for dhcp requests anyway - in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq will need to be restarted anyway (to get it listening on the dhcp port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there are no dhcp ranges) we need to restart dnsmasq so that it will stop listening on port 67. These special situations are handled in the bridge driver's networkUpdate() by checking for ((bool) nranges||nhosts) both before and after the update, and triggering a dnsmasq restart if the before and after don't match.
-
- 21 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
-
- 23 7月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Per the FSF address could be changed from time to time, and GNU recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html) You should have received a copy of the GNU General Public License along with Foobar. If not, see <http://www.gnu.org/licenses/>. This patch removes the explicit FSF address, and uses above instead (of course, with inserting 'Lesser' before 'General'). Except a bunch of files for security driver, all others are changed automatically, the copyright for securify files are not complete, that's why to do it manually: src/security/security_selinux.h src/security/security_driver.h src/security/security_selinux.c src/security/security_apparmor.h src/security/security_apparmor.c src/security/security_driver.c
-
- 04 12月, 2011 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a misuse of 'an' where 'a' is proper; that has since been fixed, but a search found other problems (some were a spelling error for 'and', while most were fixed by 'a'). * daemon/stream.c: Fix grammar. * src/conf/domain_conf.c: Likewise. * src/conf/domain_event.c: Likewise. * src/esx/esx_driver.c: Likewise. * src/esx/esx_vi.c: Likewise. * src/rpc/virnetclient.c: Likewise. * src/rpc/virnetserverprogram.c: Likewise. * src/storage/storage_backend_fs.c: Likewise. * src/util/conf.c: Likewise. * src/util/dnsmasq.c: Likewise. * src/util/iptables.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * src/xen/xend_internal.c: Likewise. * src/xen/xs_internal.c: Likewise. * tools/virsh.c: Likewise.
-
- 10 11月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The socket address APIs in src/util/network.h either take the form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr. Sanitize this so everything is virSocketAddrXXXX, and ensure that the virSocketAddr parameter is always the first one. * src/util/network.c, src/util/network.h: Santize socket address API naming * src/conf/domain_conf.c, src/conf/network_conf.c, src/conf/nwfilter_conf.c, src/network/bridge_driver.c, src/nwfilter/nwfilter_ebiptables_driver.c, src/nwfilter/nwfilter_learnipaddr.c, src/qemu/qemu_command.c, src/rpc/virnetsocket.c, src/util/dnsmasq.c, src/util/iptables.c, src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for API renaming
-
- 22 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 06 7月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Some callers expected virFileMakePath to set errno, some expected it to return an errno value. Unify this to return 0 on success and -1 on error. Set errno to report detailed error information. Also optimize virFileMakePath if stat fails with an errno different from ENOENT.
-
- 29 6月, 2011 3 次提交
-
-
由 Matthias Bolte 提交于
addnhostsSave and hostsfileSave expect < 0 return value on error from addnhostsWrite and hostsfileWrite but then pass err instead of -err to virReportSystemError that expects an errno value. Also addnhostsWrite returns -ENOMEM and errno, change this to -errno. addnhostsWrite and hostsfileWrite tried to unlink the tempfile after renaming it, making both fail on the final step. Remove the unnecessary unlink calls.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
networkSaveDnsmasqHostsfile was added in 8fa9c221 (Apr 2010). It has a force flag. If the dnsmasq hostsfile already exists force needs to be true to overwrite it. networkBuildDnsmasqArgv sets force to false, networkDefine sets it to true. This results in the hostsfile being written only in networkDefine in the common case. If no error occurred networkSaveDnsmasqHostsfile returns true and networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq command line. networkSaveDnsmasqHostsfile was changed in 89ae9849 (24 Jun 2011) to return a new dnsmasqContext instead of reusing one. This change broke the logic of the force flag as now networkSaveDnsmasqHostsfile returns NULL on error, but the early return -- if force was not set and the hostsfile exists -- returns 0. This turned the early return in an error case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option anymore if the hostsfile already exists. It did because networkDefine created the hostsfile already. Then 9d4e2845 fixed the return 0 case in networkSaveDnsmasqHostsfile but didn't apply the force option correctly to the new addnhosts file. Now force doesn't control an early return anymore, but influences the handling of the hostsfile context creation and dnsmasqSave is always called now. This commit also added test cases that reveal several problems. First, the tests now calls functions that try to write the dnsmasq config files to disk. If someone runs this tests as root this might overwrite actively used dnsmasq config files, this is a no-go. Also the tests depend on configure --localstatedir, this needs to be fixed as well, because it makes the tests fail when localstatedir is different from /var. This patch does several things to fix this: 1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv to the caller to separate the command line generation from the config file writing. This makes the command line generation testable without the risk of interfering with system files, because the tests just don't call dnsmasqSave. 2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag useless as the saving happens somewhere else now. This fixes the wrong usage of the force flag in combination with then newly added addnhosts file by removing the force flag. 3) Adapt the wrong test cases to the correct behavior, by adding the missing --dhcp-hostsfile option. Both affected tests contain DHCP host elements but missed the necessary --dhcp-hostsfile option. 4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile, because it doesn't save the dnsmasqContext anymore. 5) Move all directory creations in dnsmasq context handling code from the *New functions to dnsmasqSave to avoid directory creations in system paths in the test cases. 6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext anymore the test case can create one with the localstatedir that is expected by the tests instead of the configure --localstatedir given one.
-
- 25 6月, 2011 1 次提交
-
-
由 Michal Novotny 提交于
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
-
- 28 4月, 2011 1 次提交
-
-
由 Laine Stump 提交于
The lone caller to hostsFileWrite (and the callers for at least 3 levels up the return stack) assume that the return value will be < 0 on failure. However, hostsFileWrite returns 0 on success, and a positive errno on failure. This patch changes hostsFileWrite to return -errno on failure.
-