kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Qemu doesn't currently support them and behaves strangely. Just forbid
them.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1079162

Similarly to 49a3a649 forbid creating
snapshots in domain states impossible to reach in qemu.

Under ./configure --without-numactl but with numactl-devel installed,
the build fails with:

../../src/util/virnuma.c: In function 'virNumaNodeIsAvailable':
../../src/util/virnuma.c:407:5: error: implicit declaration of function 'numa_bitmask_isbitset' [-Werror=implicit-function-declaration]
     return numa_bitmask_isbitset(numa_nodes_ptr, node);
     ^

and other failures, all because the configure results for particular
functions were used without regard to whether libnuma was even being
linked in.

* src/util/virnuma.c (virNumaGetPages): Fix message typo.
(virNumaNodeIsAvailable): Correct build when not using numactl.
Signed-off-by: NEric Blake <eblake@redhat.com>

virStorageBackendLogicalCreateVol contains a piece like:

    if (vol->target.path != NULL) {
        /* A target path passed to CreateVol has no meaning */
        VIR_FREE(vol->target.path);
    }

The 'if' is useless here, but 'syntax-check' doesn't catch that
because of the comment, so drop the 'if'.

Commit ef48a1b6 introduced virFindSCSIHostByPCI for Linux and
a stub for other platforms that returns -1 while the function
should return 'char *', so use 'return NULL' instead.

Commit fbd91d49 introduced virReadSCSIUniqueId with the third
argument 'int *result', however the stub for non-Linux patform
uses 'unsigned int *result', so change it to 'int *result'.

Pushed under the build breaker rule.

If a parentaddr was provided in the XML, have getAdapterName lookup
the stable address.  This allows virStorageBackendSCSICheckPool() and
virStorageBackendSCSIRefreshPool() to automagically find the scsi_host
by its PCI address and unique_id

Introduce a new function to parse the provided scsi_host parent address
and unique_id value in order to find the /sys/class/scsi_host directory
which will allow a stable SCSI host address

Add a test to scsihosttest to lookup the host# name by using the PCI address
and unique_id value

Add an optional unique_id parameter to nodedev.  Allows for easier lookup
and display of the unique_id value in order to document for use with
scsi_host code.

Introduce a new function to read the current scsi_host entry and return
the value found in the 'unique_id' file.

Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some
of the concepts of the mocked pci test library) in order to read the
unique_id file like would be found in the /sys/class/scsi_host tree.

Rather than supplying the path again in the formatting of the sysfs
scsi_host directory.

Between reboots and kernel reloads, the SCSI host number used for SCSI
storage pools may change requiring modification to the storage pool XML
in order to use a specific SCSI host adapter.

This patch introduces the "parentaddr" element and "unique_id" attribute
for the SCSI host adapter in order to uniquely identify the adapter
between reboots and kernel reloads. For now the goal is to only parse
and format the XML. Both will be required to be provided in order to
uniquely identify the desired SCSI host.

The new XML is expected to be as follows:

  <adapter type='scsi_host'>
    <parentaddr unique_id='3'>
      <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/>
    </parentaddr>
  </adapter>

where "parentaddr" is the parent device of the SCSI host using the PCI
address on which the device resides and the value from the unique_id file
for the device. Both the PCI address and unique_id values will be used
to traverse the /sys/class/scsi_host/ directories looking at each link
to match the PCI address reformatted to the directory link format where
"domain:bus:slot:function" is found.  Then for each matching directory
the unique_id file for the scsi_host will be used to match the unique_id
value in the xml.

For a PCI address listed above, this will be formatted to "0000:00:1f.2"
and the links in /sys/class/scsi_host will be used to find the host#
to be used for the 'scsi_host' device. Each entry is a link to the
/sys/bus/pci/devices directories, e.g.:

%  ls -al /sys/class/scsi_host/host2
lrwxrwxrwx. 1 root root 0 Jun  1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2

% cat /sys/class/scsi_host/host2/unique_id
3

The "parentaddr" and "name" attributes are mutually exclusive to identify
the SCSI host number. Use of the "parentaddr" element will be the preferred
mechanism.

This patch only supports to parse and format the XMLs. Later patches will
add code to find out the scsi host number.

Preparation for future patches by creating a scsi_host union. For now,
just the 'name' will be present.

Rather than assume that NOT FC_HOST is SCSI_HOST, let's call them out
specifically. Makes it easier to find SCSI_HOST code/structs and ensures
something isn't missed in the future

Commit 5df81317 forgot to adjust a few
callers of virStrToLong_ui to ignore the returned value in some ancient
parts of the code.

We do so in the vast majority of places, so there's no problem of adding
the attribute to enforce it by the complier and fix a few leftover
places.

This was originally pointed out by Coverity as a recent change triggered
it's warning that our code checked the vast majority of returns from
virStrToLong_ui.

Report errors on some states snapshots done by qemu should never reach

Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.

The logic of the code is preserved until later patches.

Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:

 * Save domain state
  - Modify virBhyveProcessStart() to save domain state to the state
    dir
  - Modify virBhyveProcessStop() to cleanup the pidfile and the state

 * Detect if the state information loaded from the driver's state
   dir matches the actual state. Consider domain active if:
    - PID it points to exist
    - Process title of this PID matches the expected one with the
      domain name

   Otherwise, mark the domain as shut off.

Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.

As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368

There's no need to use it since we have this shiny functions
that even checks for conversion and overflow errors.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.

https://bugzilla.redhat.com/show_bug.cgi?id=1091866

Add a new boolean 'sparse'.  This will be used by the logical backend
storage driver to determine whether the target volume is sparse or not
(also known by a snapshot or thin logical volume). Although setting sparse
to true at creation could be seen as duplicitous to setting during
virStorageBackendLogicalMakeVol() in case there are ever other code paths
between Create and FindLVs that need to know about the volume be sparse.

Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether
to attempt to wipe the logical volume or not. For now, I have found no
means to wipe the volume without writing to it. Writing to the sparse
volume causes it to be filled. A sparse logical volume is not completely
writeable as there exists metadata which if overwritten will cause the
sparse lv to go INACTIVE which means pool-refresh will not find it.
Access to whatever lvm uses to manage data blocks is not provided by
any API I could find.

Rather than a unsigned int, use a 'bool' since that's how it was used.

Update the VSphere version comment in esx_vi.c for ESX 5.1 and 5.5.

Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:

 - virDomainNumatune
 - virDomainNumatunePtr
 - virDomainDef
 - virDomainDefPtr

As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.

In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.

Coverity complains about the return value of ioctl not being checked.

Even though we carry on when this fails (just like qemu-img does),
we can log an error.

For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710

The next patch will move the storage volume wiping code into the
individual backends. This patch splits out the common code to wipe a
local volume into a separate backend helper so that the next patch is
simpler.

For ESX, the code that builds XML descriptions for attached storage pools was
not setting the host count to anything when it returned a host name.

When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails.  This is because cgroup restrict even kernel
allocations.  We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.

This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether.  That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated.  QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch.  One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification.  This
will be used in later patch.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>