Those were pointed by DanB in his review but not yet fixed

* src/qemu/qemu_driver.c: qemudWaitForMonitor() use EnterMonitorWithDriver()
  and ExitMonitorWithDriver() there
* src/qemu/qemu_monitor_text.c: checking fro strdu failure and hash
  table add error in qemuMonitorTextGetPtyPaths()

This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.

Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.

* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
  qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
  qemuMonitorGetPtyPaths().

* src/qemu/qemu_driver.c: Parse pty devices for channels

Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
  available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
  for all current serial and parallel tests.

Even if qemudStartVMDaemon suceeds, an error was logged such as
'qemuRemoveCgroup:1778 : internal error Unable to find cgroup for'.
This is because qemudStartVMDaemon calls qemuRemoveCgroup to
ensure that old cgroup does not remain. This workaround makes
sense but leaving an error message may confuse users.
* src/qemu/qemu_driver.c: a an option to the function to suppress the
  error being logged

This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.

* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.

This makes a small change on the failed-migration path.  Up to now,
all VMs that failed non-live migration after the "stop" command
were restarted.  This must not be done when the VM was paused in
the first place.

* src/qemu/qemu_driver.c (qemudDomainMigratePerform): Do not restart
  a paused VM that fails migration.  Set paused state after "stop",
  reset it after failure.

See also:
https://bugzilla.redhat.com/show_bug.cgi?id=545400#c1

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu).  This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.

This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.

* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
  are detected

Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor  commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.

* src/conf/domain_conf.c: Make virDomainObjUnref return the
  remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
  after qemuDomainObjEndJob if it has been deleted.

* src/qemu/qemu_monitor_json.c: Hook up reset, shutdown,
  poweroff and stop events

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
  for reset, shutdown, poweroff and stop events. Add convenience
  methods for emiting those events

With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table

* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
  monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
  the EOF and disk secret callbacks with a callback table

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.

The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.

* src/conf/capabilities.h: Add callbacks for serializing private
  state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
  monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
  fields from virDomainObjPtr. Remove code that serialized
  those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
  and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
  char device config into qemuMonitorOpen directly.

The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()

* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
  of qemudInitCpuAffinity()

The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()

* src/qemu/qemu_monitor_text.c: Add missing underscore in the
  migrate_cancel monitor command impl

The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum

If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do  qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.

To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.

* src/qemu/qemu_driver.c: Hold a reference on the monitor while
  executing commands, and only NULL-ify the priv->mon field when
  the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
  counting to handle safe deletion of monitor objects

* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
  qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
  in qemudDomainSave

* src/qemu/qemu_driver.c: Free cgroup ACLs

* src/qemu/qemu_conf.c: Fix default disk type to be 'FILE'
  again, after previous commit accidentally changed it

* src/qemu/qemu_driver.c: remove the port filter if the network device
  is detached via virDomainDetachDevice.

Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests

The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock

* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
  and things it calls

The QEMU monitor open method would not take a reference on
the virDomainObjPtr until it had successfully opened the
monitor. The cleanup code upon failure to open though would
call qemuMonitorClose() which would in turn decrement the
reference count. This caused the virDoaminObjPtr to be mistakenly
freed and then the whole driver crashes

* src/qemu/qemu_monitor.c: Fix reference counting in
  qemuMonitorOpen

* src/qemu/qemu_conf.c: Remove and inline qemudBuildCommandLineChrDevTargetStr

There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.

* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
  the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus

* src/qemu/qemu_monitor.c: add error check for qemuMonitorOpenXXX
  returned file descriptor

When running qemu:///system instance, libvirtd runs as root,
but QEMU may optionally be configured to run non-root. When
then saving a guest to a state file, the file is initially
created as root, and thus QEMU cannot write to it. It is also
missing labelling required to allow access via SELinux.

* src/qemu/qemu_driver.c: Set ownership on save image before
  running migrate command in virDomainSave impl. Call out to
  security driver to set save image labelling
* src/security/security_driver.h: Add driver APIs for setting
  and restoring saved state file labelling
* src/security/security_selinux.c: Implement saved state file
  labelling for SELinux

* src/qemu/qemu.conf:  disables the mac_filter config switch by default
  to match existing convention, also document the option

* src/qemu/qemu_conf.c: don't initialize ebtables if
  disabled

* src/qemu/qemu_monitor.c src/qemu/qemu_monitor_text.c: cast size_t to
  int when passing to '%d'

This implements the virConnectIsSecure, virConnectIsEncrypted,
virDomainIsPersistent, virDomainIsActive, virNetworkIsActive,
virNetworkIsPersistent, virStoragePoolIsActive,
virStoragePoolIsPersistent, virInterfaceIsActive APIs in
(nearly) all drivers. Exceptions are:

 phyp: missing domainIsActive/Persistent
 esx: missing domainIsPersistent
 opennebula: missing domainIsActive/Persistent

* src/remote/remote_protocol.x: Define remote wire ABI for newly
  added APIs.
* daemon/remote_dispatch*.h: Re-generated from remote_protocol.x
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_conf.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/remote/remote_driver.c, src/storage/storage_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xen/xen_driver.h, src/xen/xen_inotify.c,
  src/xen/xen_inotify.h: Implement all the new APIs where possible