Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.

Since commit 51045df0, the QEMU_CAPS_DEVICE capability is enabled
automatically and shouldn't be passed as an argument to DO_TEST();
however, commit 998a936c accidentally introduced few such uses.

When virt-admin is run with valgrind, this kind of output can be obtained:

HEAP SUMMARY:
  in use at exit: 134,589 bytes in 1,031 blocks
  total heap usage: 2,667 allocs, 1,636 frees, 496,755 bytes allocated

88 bytes in 1 blocks are definitely lost in loss record 82 of 128
 at 0x4C2A9C7: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
 by 0x52F6D1F: virAllocVar (viralloc.c:560)
 by 0x5350268: virObjectNew (virobject.c:193)
 by 0x53503E0: virObjectLockableNew (virobject.c:219)
 by 0x4E3BBCB: virAdmConnectNew (datatypes.c:832)
 by 0x4E38495: virAdmConnectOpen (libvirt-admin.c:209)
 by 0x10C541: vshAdmConnect (virt-admin.c:107)
 by 0x10C7B2: vshAdmReconnect (virt-admin.c:163)
 by 0x10CC7C: cmdConnect (virt-admin.c:298)
 by 0x110838: vshCommandRun (vsh.c:1224)
 by 0x10DFD8: main (virt-admin.c:862)

 LEAK SUMMARY:
    definitely lost: 88 bytes in 1 blocks
    indirectly lost: 0 bytes in 0 blocks
    possibly lost: 0 bytes in 0 blocks
    still reachable: 134,501 bytes in 1,030 blocks
    suppressed: 0 bytes in 0 blocks

This is because virNetClientSetCloseCallback was being reinitialized
incorrectly. By resetting the callbacks in a proper way, the leak is fixed.

A login session with the vSphere API might expire after some idle time.
The esxVI_EnsureSession function uses the SessionIsActive function to
check if the current session has expired and a relogin needs to be done.

But the SessionIsActive function needs the Sessions.ValidateSession
privilege that is considered as an admin level privilege.

Only vCenter actually provides the SessionIsActive function. This results
in requiring an admin level privilege even for read-only operations on
a vCenter server.

ESX and VMware Server don't provide the SessionIsActive function and
the code already works around that. Use the same workaround for vCenter
again.

This basically reverts commit 5699034b.

Commit f1a89a8b allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.

Check for the presence of os->type.machine even if the
VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS flag is set,
otherwise the daemon can crash on carelessly crafted input
in the config directory.

https://bugzilla.redhat.com/show_bug.cgi?id=1267256

Use virBufferTrim to strip the extra newline at the end
of the message instead of open-coding it after the buffer's
string is formatted.

Add new function to manage adding the '-mon' or '-monitor' options to
the command line removing that task from the mainline qemuBuildCommandLine.

Also adjusted qemuBuildChrChardevStr and qemuBuildChrArgStr to use
const virDomainChrSourceDef *def rather than virDomainChrSourceDefPtr def.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-device sga' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-smbios' options to the command
line removing that task from the mainline qemuBuildCommandLine

Also while I was looking at it, move the uuid processing closer to usage.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-numa' options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the IOThread '-object' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename function and move code in from qemuBuildCommandLine to
keep smp related code together. Also make a few style changes
for long lines, return value change, and 2 spaces between functions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the '-m' memory options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename function and move code from mainline qemuBuildCommandLine to
keep alike code together.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename to qemuBuildMachineCommandLine to fit current (and future)
helper naming conventions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create qemuBuildCommandLineValidate to make some checks before trying
to build the command. This will move some logic from much later to much
earlier - we shouldn't be adjusting any data so that shouldn't matter.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Fix logic error introduced in commit d6c91b3c which essentially broke
starting any domain.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.

As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.

CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.

Drop the <backingStore> subtree once we want to update the XML.

Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
      <driver name="qemu" type="qcow2"/>

      <backingStore type="file" index="1">
        <format type="qcow2"/>
        <source file="/var/lib/libvirt/images/vm.1436949097"/>
        <backingStore/>
      </backingStore>
      <target dev="hdc" bus="ide"/>
      ...
    </disk>

After:

 $ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
      <driver name="qemu" type="qcow2"/>

      <target dev="hdc" bus="ide"/>
      ...
    </disk>

Remove the local variable 'emulator' and just use def->emulator
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The migration code now doesn't need it, so remove the macros and the
configure code that is detecting it.

Which is the only user. That was the only reason for including
qemu_command.h, though we need to explicitly include qemu_domain.h
afterwards.

This was only used for test 'xml blanking', which has now all
been removed, and isn't an ideal paradigm anyways since it
inhibits easy XML regeneration.

Hardcode a UUID like we did for qemuargv2xml, so we can use standard
comparison helpers, which gives us VIR_TEST_REGENERATE_OUTPUT support

The memory XML blanking is only there to avoid the unit= churn that
was added by default a long time ago.

Drop the blanking, switch over to using the standard comparison
helpers, and regenerate the output with VIR_TEST_REGENERATE_OUTPUT.

If a qemuargv has iscsi or ceph secrets on the command line, we will
convert that to XML like:

  <auth username='myname'>
    <secret type='iscsi'/>
  </auth>

This is not valid XML, as either a UUID or usage must be specified in
the secret block. It's not clear though how the argv2xml code can do
anything correct here, since XML like this requires a libvirt secret
object to have already been defined.

The current test suite handles this by blanking out any <secret> block
in the XML. This avoids domainschematest failures.

Instead of blanking, let's hardcode a usage= name. This lets us test
the other bits of generated <secret> XML, and is a step towards wiring
up VIR_TEST_REGENERATE_OUTPUT

Overwrite any randomly generated UUID to use a hardcoded value, so
we don't need to blank it when comparing XML.

None of the test cases depend on dropping these XML bits

Now that the file migration doesn't require us to use 'dd' and other
legacy stuff for too old qemus we don't even have to calcuate the
offsets and other stuff.

With the currently supported qemus we always migrate to file
descriptors so the old function is not required any more.

Additionally QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE macro is now
unused.

In cf113e8d we changed the declaration of
virCgroupAllowDevicePath() and virCgroupDenyDevicePath().
However, while updating the stub for non-cgroup platforms for the
former we forgot to update the latter too causing a build
failure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit 611a278f.

According to the original commit message, this is dead code:

  It is highly unlikely that a backend will know how to create a
  volume from a different volume (buildVolFrom) and not know how to
  create an empty volume (createVol).

Although it currently doesn't cause any linking issues, the symbol should be
exported correctly according to our conventions.

Since we introduced listing API earlier in these series, it's time
to wire up the API to the virt-admin client.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.

Best viewed with -M.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

oVirt wants to use OVMF images on top of lvm for their 'logical'
storage thus we should set up device ACLs for them so it will actually
work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1305922