Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple

  (virt type, os type, arch)

This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities.  This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.

Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.

To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.

If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...

 - The test driver is hardcoded to always use i686 arch
 - The VMWare/ESX drivers will always place i686 guests ahead
   of x86_64 guests in capabilities, so effectively they always
   use i686
 - The QEMU driver can potentially return any arch at all
   depending on what combination of QEMU binaries are installed.

The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.

IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.

With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.

Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.

Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJidong Xia <xiajidong@cmss.chinamobile.com>

Introduced in c8007fdc, it should use 'greater than max' instead of
'equal or greater than max' for the condition of checking invalid scsi
unit.
Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In the past the network driver was (mistakenly) being called for all
interfaces, not just those of type='network', and so it had a chance
to validate all interface configs after the actual type of the
interface was known.

But since the network driver has been more completely/properly
separated from qemu, the network driver isn't called during the
startup of any interfaces except those with type='network', so this
validation no longer takes place for, e.g. <interface type='bridge'>
(or direct, etc). This in turn meant that a config could erroneously
specify a vlan tag, or bandwidth settings, for a type of interface
that didn't support it, and the domain would start without complaint,
just silently ignoring those settings.

This patch moves those validation checks out of the network driver,
and into virDomainActualNetDefValidate() so they will be done for all
interfaces, not just type='network'.

https://bugzilla.redhat.com/1741121Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.

To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.

This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.

There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.

The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):

1) post-parse hypervisor-agnostic
   (virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
   (qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
   (qemuDomainValidateActualNetDef() - qemu_domain.c:5390)

I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

These all just return a scalar value, so there's no daisy-chained
fallout from changing them, and they can easily be combined in a
single patch.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

This is needed if we want to call the function when the
virDomainNetDef* we have is a const.

Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Most likely for historical reasons our CPU def formatting code is
happily adding useless <model fallback='allow'/> for host-model CPUs. We
can just drop it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit v0.8.4-66-g95ff6b18 (9 years ago) changed the default value for
the cpu/@match attribute to 'exact' in a rather complicated way. It did
so only if <model> subelement was present and set -1 otherwise (which is
not expected to ever happen). Thus the following two equivalent XML
elements:

    <cpu mode='host-model'/>

and

    <cpu mode='host-model'>
      <model/>
    </cpu>

would be parsed differently. The former would end up with match == -1
while the latter would have match == 1 ('exact'). This is not a big deal
since the match attribute is ignored for host-model CPUs, but we can
simplify the code and make it a little bit saner anyway.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This previous commit introduced a simpler free callback for
hash data with only 1 arg, the value to free:

  commit 49288fac
  Author: Peter Krempa <pkrempa@redhat.com>
  Date:   Wed Oct 9 15:26:37 2019 +0200

    util: hash: Add possibility to use simpler data free function in virHash

It missed two functions in the hash table code which need
to call the alternate data free function, virHashRemoveEntry
and virHashRemoveSet.

After the previous patch though, there is no code that
makes functional use of the 2nd key arg in the data
free function. There is merely one log message that can
be dropped.

We can thus purge the current virHashDataFree callback
entirely, and rename virHashDataFreeSimple to replace
it.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virChrdevHashEntryFree method uses the hash 'key'
as the name of the logfile it has to remove. By storing
a struct as the value which contains the stream and
the dev path, we can avoid relying on the hash key
when free'ing entries.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically we've only supported the <backingStore> as an output-only
element for domain disks. The documentation states that it may become
supported on input. To allow management apps detectin once that happens
add a domain capability which will be asserted if the hypervisor driver
will be able to obey the <backingStore> as configured on input.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Commit 5751a0b6 added a helper function
called virDomainCapsFeaturesInitUnsupported which initialized all domain
capability features as unsupported.

When adding a new feature this would initialize it as unsupported also
for hypervisor drivers which the original author possibly didn't intend
to modify. To prevent accidental wrong value being reported in such case
revert back to initializing individual features in the hypervisor
drivers themselves.

This is not a straight revert as additonal patches modified how we store
the capabilities.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The qemu_domain_monitor_event_msg struct in qemu_protocol.x
defines event as a nonnull_string and qemuMonitorJSONIOProcessEvent
also errors out on a non-NULL event.

Drop the check to fix the build with static analysis.

This essentially reverts commit d343e820Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Both virDomainCapsCPUModelsAdd and virDomainCapsCPUModelsAddSteal are so
simple we can just squash the code in a single function.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than returning a direct pointer the list stored in qemuCaps the
function now creates a new copy of the CPU models list.

The main purpose of this seemingly useless change is to update callers
to free the result returned by virQEMUCapsGetCPUDefinitions because the
internals of this function will change significantly in the following
patches.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Ensure that both x and y are non-zero when resolution is specified for a
video device.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Since this function is now only called when an 'acceleration' element is
present in the xml, any failure to parse the element will be considered
an error.

Previously, we detected some types of errors, but we would only log an
error (virReportError()), but still return a partially-specified accel
object to the caller. This patch returns NULL for all parsing errors and
reports that error back up to the caller.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

The current code doesn't properly handle errors when parsing a video
device's resolution.  We were returning a NULL structure for the case
where 'x' or 'y' were missing. But for the other error cases, we were
logging an error (virReportError()), but still returning an
under-specified structure. That under-specified structure was used by
the calling function rather than properly reporting an error.

This patch changes the parse function to return NULL on any parsing
error and changes the calling function to report an error when NULL is
returned.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Previously, we were passing the video "model" node to the "acceleration"
and "resolution" parsing functions and requiring them to iterate over
the children to discover and parse the appropriate node. It makes more
sense to move this responsibility up to the parent function and just
pass these functions the node that needs to be parsed.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu

For example, the following configuration can be used to provide a vgpu
with a boot display:

    <hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
        <source>
            <address uuid='$UUID'/>
        </source>
    </hostdev>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

As suggested by Cole, this patch uses the domain capabilities to
validate the supported video model types. This allows us to remove the
model type validation from qemu_process.c and qemu_domain.c and
consolidates it all in a single place that will automatically adjust
when new domain capabilities are added.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Declare the capabilities as enum values and store them in an array. This
makes adding new features more straightforward and simplifies the
formatter which now doesn't require changing.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

For future extensions of the domain caps it's useful to have a single
point that initializes all capabilities as unsupported by a driver. The
driver then can enable specific ones.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Extract it to virDomainCapsFormatFeatures so that the main function does
not get so bloated over time.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce qemuDomainCapsFeatureFormatSimple which does exactly the same
thing but it's a function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All callers use nameLen == -1 anyway.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A function virStringParseYesNo was added to convert
string 'yes' to true and 'no' to false, so use this
helper to replace 'STREQ(.*, \"yes\")' and
'STREQ(.*, \"no\")' as it allows us to drop several
repetitive if-then-else string->bool conversion blocks.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

This helper performs a conversion from a "yes|no" string
to a corresponding boolean, and several conversions were
already done, but there are still some omissions.

For most of the remaining usages in domain_conf.c only
"yes" is explicitly checked for. This means all other
values are implicitly handled as 'false'. In this case,
use virStringParseYesNo to handle the conversion and
reserve the original logic of not raise an error, so
ignore the return value of helper.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>

In preparation for some other improvements, switch to using glib
allocation and g_autofree when parsing the 'acceleration' and
'resolution' properties of the video device.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>