1. 24 7月, 2009 1 次提交
    • E
      First version of the Power Hypervisor driver · a7a82f98
      Eduardo Otubo 提交于
      Features supported:
      - Connects to HMC/VIOS or IVM systems.
      - Life cycle commands (resume and shutdown).
      - dumpxml
      - 'list' and 'list --all'
      
      What is being implemented:
      - better and centralized control for UUID
      - definexml
      - CPU management commands
      
      * src/domain_conf.c src/domain_conf.h: first version of the driver
      * configure.in src/Makefile.am include/libvirt/virterror.h
        src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
        in the general framework
      a7a82f98
  2. 22 7月, 2009 5 次提交
    • M
      Retain PCI address from NIC attach · 4e21a95a
      Mark McLoughlin 提交于
      When we pci_add a NIC, we need to retain the PCI address assigned by
      qemu for using during detach.
      
      * src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
        address from the pci_add reply
      
      * src/domain_conf.c: handle storing and parsing the PCI address in the
        domain state XML file
      4e21a95a
    • M
      Store the interface vlan number in the domain state · 30605477
      Mark McLoughlin 提交于
      Currently, an interface's vlan number corresponds to its index in
      the table of network interfaces. That is no longer true when we
      allow devices to be removed.
      
      To fix this, we store the vlan number in the domain's state XML
      so that it survives libvirtd restarts.
      
      * src/domain_conf.h: add vlan number to virDomainNetDef
      
      * src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting
        to -1 if this is state saved by a previous version of libvirt
      
      * src/qemu_conf.c: assign vlan numbers before starting qemu
      30605477
    • M
      Assign names to qemu NICs and network backends · c23dae4e
      Mark McLoughlin 提交于
      We need these so that we can remove the devices via the monitor.
      
      * src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
      
      * src/domain_conf.c: free nic_name and hostnet_name
      
      * src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
        support for the param and pass the names on the command line
      
      * tests/qemuxml2argv*: add a test for this
      c23dae4e
    • M
      Retain disk PCI address across libvirtd restarts · 01654107
      Mark McLoughlin 提交于
      When we hot-plug a disk device into a qemu guest, we need to retain its
      PCI address so that it can be removed again later. Currently, we do
      retain the slot number, but not across libvirtd restarts.
      
      Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
      VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
      domain and bus number, but the format allows us to do that in future.
      
      * src/domain_conf.h: replace slotnum with pci_addr struct, add helper
        for testing whether the address is valid
      
      * src/domain_conf.c: handle formatting and parsing the address
      
      * src/qemu_driver.c: store the parsed slot number as a full PCI address,
        and use this address with the pci_del monitor command
      
      * src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
        it can never be set, just delete it
      01654107
    • M
      Add internal XML parsing/formatting flag · aa98871c
      Mark McLoughlin 提交于
      We need to store things like device names and PCI slot numbers in the
      qemu domain state file so that we don't lose that information on
      libvirtd restart. Add a flag to indicate that this information should
      be parsed or formatted.
      
      Make bit 16 and above of the flags bitmask for internal use only and
      consume the first bit for this new status flag.
      
      * include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
      
      * src/libvirt.c: reject private flags in virDomainGetXMLDesc()
      
      * src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
      
      * src/domain_conf.c: pass the flag from virDomainObjParseXML() and
        virDomainSaveStatus
      aa98871c
  3. 10 7月, 2009 1 次提交
    • M
      Add the monitor type to the domain state XML · 05d377bd
      Mark McLoughlin 提交于
      There are no functional changes in this patch apart from adding the
      monitor type to the state XML.
      
      The patch mostly consists of switching to use virDomainChrDef every
      where to describe the monitor.
      
      * src/domain_conf.h: replace monitorpath with monitor_chr
      
      * src/domain_conf.c: handle parsing the monitor type and initializing
        monitor chr
      
      * src/qemu_conf.[ch]: make qemudBuildCommandLine take a
        virDomainChrDefPtr and use that to build the -monitor parameter
      
      * src/qemu_driver.c: split pty specific and common code from
        qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
      
      * tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
      05d377bd
  4. 08 7月, 2009 1 次提交
  5. 16 6月, 2009 1 次提交
  6. 12 6月, 2009 1 次提交
  7. 25 5月, 2009 1 次提交
    • D
      Include the OpenNebula driver · b811851b
      Daniel Veillard 提交于
      * src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
        the OpenNebula driver
      * configure.in include/libvirt/virterror.h qemud/Makefile.am
        qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
        src/libvirt.c src/virterror.c: integration of the OpenNebula
        driver in the libvirt infrastructure
      * AUTHORS: add Abel Miguez Rodriguez
      daniel
      b811851b
  8. 21 5月, 2009 1 次提交
  9. 15 5月, 2009 1 次提交
  10. 11 5月, 2009 1 次提交
    • D
      Support for 'internal' network · 070c1c82
      Daniel Veillard 提交于
      * src/domain_conf.[ch] docs/schemas/domain.rng: add support
        for internal network in the generic part of the code, and
        update the Relax-NG grammar accordingly, patch by Pritesh Kothari
      daniel
      070c1c82
  11. 07 5月, 2009 1 次提交
    • D
      Changes needed for multiple graphics adapters · 7ee54d83
      Daniel Veillard 提交于
      * src/domain_conf.c src/domain_conf.h: parse and save multiple
        graphics elements instead of one, patch by Pritesh Kothari
      * src/qemu_conf.c src/qemu_driver.c: adapt the qemu/kvm driver for
        the new structures, patch by Pritesh Kothari
      * src/xend_internal.c src/xm_internal.c: same thing for Xen drivers
      Daniel
      7ee54d83
  12. 22 4月, 2009 1 次提交
  13. 18 4月, 2009 1 次提交
    • D
      integration of the VirtualBox support · 10d16508
      Daniel Veillard 提交于
      * configure.in include/libvirt/virterror.h src/Makefile.am
        src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
        src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
        src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
        src/vbox/vbox_tmpl.c: integration of the VirtualBox support
        patches by Pritesh Kothari
      Daniel
      10d16508
  14. 04 3月, 2009 1 次提交
  15. 03 3月, 2009 4 次提交
  16. 31 1月, 2009 1 次提交
  17. 30 1月, 2009 1 次提交
  18. 23 1月, 2009 2 次提交
  19. 21 1月, 2009 2 次提交
  20. 20 1月, 2009 2 次提交
  21. 16 1月, 2009 1 次提交
  22. 08 1月, 2009 1 次提交
  23. 20 12月, 2008 1 次提交
  24. 18 12月, 2008 1 次提交
  25. 11 12月, 2008 1 次提交
    • D
      Adding support for SDL fullscreen option · a3d570c7
      Daniel Veillard 提交于
      * src/domain_conf.c src/domain_conf.h src/qemu_conf.c
        tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
        tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
        tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
        slightly modified patch for SDL fullscreen from Itamar Heim
      * docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
        update the schemas and docs about the sdl graphic element attributes
      * AUTHORS: add Itamar Heim
      Daniel
      a3d570c7
  26. 05 12月, 2008 2 次提交
  27. 04 12月, 2008 1 次提交
  28. 20 11月, 2008 2 次提交