Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.

Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

With the introduction of cgroup v2 there are new names used with
cgroups based on which version is used:

    - legacy: cgroup v1
    - unified: cgroup v2
    - hybrid: cgroup v1 and cgroup v2

Let's use 'legacy' instead of 'cgroupv1' or 'controllers' in our code.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

They all need virCgroupV1GetMemoryUnlimitedKB() so it's easier to
move them in one commit.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This will be required once cgroup v2 is introduced.  The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.

In order to use virCgroupNewSelf we need to create all the remaining
data files:

    - {name}.cgroups represents /proc/cgroups, it is a list of cgroup
      controllers compiled into kernel

    - {name}.self.cgroup represents /proc/self/cgroup, it describes
      cgroups to which the process belongs

For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This reverts commit 4da4a9fe.

Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.

When a variable of type virCgroupPtr is declared using
VIR_AUTOPTR, the function virCgroupFree will be run
automatically on it when it goes out of scope.

This commit also adds an intermediate typedef for virCgroup
type for use with the cleanup macros.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If a cgroup controller is co-mounted with another, eg

   /sys/fs/cgroup/cpu,cpuacct

Then it is a requirement that there exist symlinks at

   /sys/fs/cgroup/cpu
   /sys/fs/cgroup/cpuacct

pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The definition of structs for cgroups are kept in vircgroup.c since
they are intended to be private from users of the API. To enable
effective testing, however, they need to be accessible. To address
the latter issue, without compronmising the former, this introduces
a new vircgrouppriv.h file to hold the struct definitions.

To prevent other files including this private header, it requires
that __VIR_CGROUP_ALLOW_INCLUDE_PRIV_H__ be defined before inclusion
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

* src/lxc_conf.c, src/lxc_conf.h, src/lxc_container.c,
  src/lxc_container.h, src/lxc_controller.c, src/lxc_driver.c,
  src/lxc_driver.h, src/veth.c, src/veth.h: Move to src/lxc/
* src/opennebula/one_driver.c: Remove bogus veth.h include
* src/Makefile.am: Adjust for lxc paths
* daemon/qemud.c: Adjust include for lxc

Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'

* configure.in include/libvirt/virterror.h src/Makefile.am
  src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
  Applied 3 patches from Dave Leskovec for intial support of
  Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel

Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.

	* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h,
	  src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more
	  of qemu if configured --without-qemu.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel