QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Previous commits removed all capabilities from per-device property
probing for:

  pci-assign
  kvm-pci-assign
  usb-host
  scsi-generic

Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.

Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 72574808
from 2012.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:

1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.

Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.

Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Commit 4ae59411 introduced the ability to make probing for
device properties conditional on a capability being set, but
didn't extend the use of this feature to existing devices.

This commit does the last bit of work, which results in a lot
of pointless QMP chatter no longer happening and our test suite
shrinking a fair bit.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Adjust qemu 2.9 s390 capabilites xml and enable qemu capabilities test.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Add new capability for the "-machine loadparm" QEMU option.

Add the capabilities replies/xml for s390x for QEMU 2.9.50.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>

If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When qmp query-cpu-model-expansion is available probe Qemu for its view of the
host model. In kvm environments this can provide a more complete view of the
host model because features supported by Qemu and Kvm can be considered.
Signed-off-by: NCollin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>

Expected Qemu replies for versions 2.7 and 2.8 from the s390x
Qemu binary.
Signed-off-by: NCollin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>

Qemu decided to change a parameter name in rc-state which was not
captured by the 2.8.0 data. Bump it to current version.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Let's set QEMU_CAPS_KVM and QEMU_CAPS_ENABLE_KVM early so that the rest
of the probing code can use these capabilities to handle KVM/TCG replies
differently.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch simplifies QEMU capabilities for QXL video device.  QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.

Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.

This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

As of (v2.7.0-rc1-52-g42e0d60)

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

An iothread for virtio-scsi is a property of the controller. Add a lookup
of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse
the output.  For both, support for the iothread was added in qemu 2.4
while support for virtio-scsi in general was added in qemu 1.4.

Modify the various mock capabilities replies (by hand) to reflect the
when virtio-scsi was supported and then specifically when the iothread
property was added. For versions prior to 1.4, use the no device error
return for virtio-scsi. For versions 1.4 to before 2.4, add some data
for virtio-scsi-pci even though it isn't complete we're not looking for
anything specific there anyway. For 2.4 to 2.6, add a more complete reply.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Reports whether we support -device nec-usb-xhci,p3=XXX value,
which has been available since qemu 1.3.0

    The pxb device is a PCIe expander bus that can be added to any
    Q35-based machinetype. A single PCIe port (*not* hotpluggable) is
    provided; if more than one device is desired, or if hotplug
    support is needed, either a pcie-root-port, or some combination of
    pcie-switch-upstream-port and pcie-swith-downstream-ports must be
    added to it. It can have a NUMA node number associated with it, as
    well as a bus number.

Add a capability bit for the qemu secret object.

Adjust the 2.6.0-1 caps/replies to add the secret object. For the
.replies it's take from the '{"execute":"qom-list-types"}' output.

Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add appropriate capability check and new virQEMUCaps flag for the new
virtio balloon feature. QEMU commit with the complete feature description:
http://git.qemu.org/?p=qemu.git;a=commit;h=e3816255bf4b6377bb405331e2ee0dc14d841b80

Update test data to match

Signed-off-by: NDmitry Mishin <dim@virtuozzo.com>

Check if virtio-gpu provides virgl option, and add qemu command line
formatter.

It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
 <acceleration accel3d='yes'/>
</model>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

qemu 2.5 provides virtio video device.  It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Allow setting vgamem size for video devices.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>