Initializing libvirt log in virt-aa-helper and getting it to output
libvirt log to stderr. This will help debugging problems happening in
libvirt functions called from within virt-aa-helper

Rules generated for a path like '/' were having '//' which isn't
correct for apparmor. Make virt-aa-helper smarter to avoid these.

Daemon used false logic for determining whether there were any clients.
When the timer was inactive, it was activated if at least one of the
servers did not have clients.  So the bool was being flipped there and
back all the time in case there was one client, for example.

Initially introduced by fa142073.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1240283Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

So callers don't have to iterate over each server.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In commit 714b38cb I tried to avoid
having two disks with the same WWN in a VM. I forgot to check the
hotplug paths though which make it possible bypass that check. Reinforce
the fix by checking the wwn when attaching the disk.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208009

When virsh vol-clone is attempted on a raw file where capacity > allocation,
the resulting cloned volume has a size that matches the virtual-size of
the parent; in place of matching its actual, disk size.
This patch fixes the cloned disk to have same _allocated_size_ as
the parent file from which it was cloned.

Ref: http://www.redhat.com/archives/libvir-list/2015-May/msg00050.html

Also fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1130739Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Instead of storing the remaining bytes, store the position of the first
unallocated byte. This will allow changing the amount of bytes copied
by virStorageBackendCopyToFD without changing the safezero call.

No functional impact.

Libvirt's error messages do not end with a LF. However, when reading the
error from QEMU log, we would read the LF from the log and keep it in
the message.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Since we already support the MIGRATION event, we just need to make sure
the domain condition is signalled whenever a p2p connection drops or the
domain is paused due to IO error and we can avoid waking up every 50 ms
to check whether something happened.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We don't need to call query-migrate every 50ms when we get the current
migration state via MIGRATION event.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When QEMU supports migration events the qemuDomainJobInfo structure will
no longer be updated with migration statistics. We have to enter a job
and explicitly ask QEMU every time virDomainGetJob{Info,Stats} is
called.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Even if QEMU supports migration events it doesn't send them by default.
We have to enable them by calling migrate-set-capabilities. Let's enable
migration events everytime we can and clear QEMU_CAPS_MIGRATION_EVENT in
case migrate-set-capabilities does not support events.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Thanks to Juan's work QEMU finally emits an event whenever migration
state changes.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This fixes

  CC     qemu/libvirt_driver_qemu_impl_la-qemu_conf.lo
  qemu/qemu_conf.c: In function 'qemuRemoveSharedDevice':
  qemu/qemu_conf.c:1384:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Some guests lock the tray and QEMU eject command will simply fail to
eject the media.  But the guest OS can handle this attempt to eject the
media and can unlock the tray and open it. In this case, we should try
again to actually eject the media.

If the first attempt fails to detect a tray_open we will fail with
error, from monitor.  If we receive that event, we know, that the guest
properly reacted to the eject request, unlocked the tray and opened it.
In this case, we need to run the command again to actually eject the
media from the device.  The reason to call it again is, that QEMU
doesn't wait for the guest to react and report an error, that the tray
is locked.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1147471Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Modify the eject monitor functions to parse the return code and detect,
whether the error contains "is locked" to report this type of failure to
upper layers.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There are multiple consumers for the domain condition and we should
always wake them all.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We should distinguish between success and timeout, to let the user
handle those two events differently.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Before:

 # virsh blockjob r7 vdc
 error: An error occurred, but the cause is unknown

After:

 # virsh blockjob r7 vdc
 error: Disk 'vdc' not found in the domain

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1241355Signed-off-by: NLuyao Huang <lhuang@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1142631

Commit id 'e0e29055' added a check to determine if the same bus
had the same target value.  It seems that's not quite good enough
as the check should check the target name value regardless of bus type.

Also added a DO_TEST_DIFFERENT to exhibit the issue

This patch reverts commit 4749d82a which tried to tweak the logic in
volume creation. We did realloc and update our object list before we executed
volume building within a specific storage backend. If that failed, we
had to update (again) our object list to the original state as it was before the
build and delete the volume from the pool (even though it didn't exist - this
truly depends on the backend).
I misunderstood the base idea to be able to poll the status of the volume
creation using vol-info. After commit 4749d82a this wasn't possible
anymore, although no BZ has been reported yet.

Commit 4749d82a also claimed to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1223177, but commit c8be606b of the
same series as 4749d82ad (which was more of a refactor than a fix)
fixes the same issue so the revert should be pretty straightforward.
Further more, BZ https://bugzilla.redhat.com/show_bug.cgi?id=1241454 can be
fixed with this revert.

Setting of 'val' is a boolean expression, so handle it that way and
adjust the check/return logic to be clearer
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Set to ret = -1 and prove otherwise, like usual
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since a future patch will need the device path generated when adding a
shared host device, remove the qemuAddSharedHostdev and inline the two
calls into qemuAddSharedHostdev and qemuRemoveSharedHostdev
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Split out the current function in order to share the code with hostdev
in a future patch. Failure to match the expected sgio value against what
is stored will cause an error which the caller would need to handle since
only the caller has the disk (or eventually hostdev) specific data in
order to uniquely identify the disk in an error message.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Set the state of virDomainObj in the functions that
actually change the domain state, instead of the generic
libxlDomainCleanup function. This approach gives functions
calling libxlDomainCleanup more flexibility wrt when and
how they change virDomainObj state via virDomainObjSetState.

The prior approach of calling virDomainObjSetState in
libxlDomainCleanup resulted in the following incorrect
coding pattern in the various functions that change
domain state

 libxlDomain<DoStateTransition>
   call libxl function to do state transition
   emit lifecycle event
   libxlDomainCleanup
     virDomainObjSetState

Once simple manifestation of this bug is seeing a domain
running in virt-manager after selecting the shutdown button,
even after the domain has long shutdown.

In Xen, dom0 is really just another domain that supports ballooning,
adding/removing devices, changing vcpu configuration, etc. This patch
adds support to the libxl driver for managing dom0. Note that the
legacy xend driver has long supported managing dom0.

Operations that are not supported on dom0 are filtered in libvirt
where a sensible error is reported. Errors from libxl are not
always helpful. E.g., attempting a save on dom0 results in

2015-06-23 15:25:05 MDT libxl: debug: libxl_dom.c:1570:libxl__toolstack_save: domain=0 toolstack data size=8
2015-06-23 15:25:05 MDT libxl: debug: libxl.c:979:do_libxl_domain_suspend: ao 0x7f7e68000b70: inprogress: poller=0x7f7e68000930, flags=i
2015-06-23 15:25:05 MDT libxl-save-helper: debug: starting save: Success
2015-06-23 15:25:05 MDT xc: detail: xc_domain_save_suse: starting save of domid 0
2015-06-23 15:25:05 MDT xc: error: Couldn't map live_shinfo (3 = No such process): Internal error
2015-06-23 15:25:05 MDT xc: detail: Save exit of domid 0 with errno=3
2015-06-23 15:25:05 MDT libxl-save-helper: debug: complete r=1: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:1876:libxl__xc_domain_save_done: saving domain: domain did not respond to suspend request: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:2033:remus_teardown_done: Remus: failed to teardown device for guest with domid 0, rc -8
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Introduce a convenience function to handle formulating the hostdev path
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a single boolean function to handle whether the hostdev is shared or not.

Use the new function for the qemu{Add|Remove}SharedHostdev calls as well
as qemuSetUnprivSGIO. NB: This third usage fixes a possible bug where
if this feature is enabled at some time in the future and the shareable flag
wasn't set, the sgio would have been erroneously set.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Update the descriptions for disk and hostdev sgio in order to indicate
not all hypervisors and OS's support this feature
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If user passes an invalid address for shared memory device to qemu,
neither libvirt nor qemu will report an error, but qemu will auto assign
a pci address to the shared memory device.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

As the backend of shmem server is a unix type chr device, save it in
virDomainChrSourceDef, so we can reuse the existing code for chr device.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Rename qemuBuildShmemDevCmd to qemuBuildShmemDevStr and change the
return type so that it can be reused in the device hotplug code later.

And split the chardev creation part in a new function
qemuBuildShmemBackendStr for reuse in the device hotplug code later.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165029Signed-off-by: NLuyao Huang <lhuang@redhat.com>

It is better not to assume that newly created network should be
connected to a bridge with same name, but specify it explicitly
by PRL_USE_VNET_NAME_FOR_BRIDGE_NAME flag.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Since QEMU commit ea96bc6 [1]:
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
the floppy controller is no longer implicit.

Specify it explicitly on the command line if the machine type version
is 2.4 or later.

Note that libvirt's floppy drives do not result in QEMU implying the
controller, because libvirt uses if=none instead of if=floppy.

https://bugzilla.redhat.com/show_bug.cgi?id=1227880

[1] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=ea96bc6

For the implicit controller, we set them via -global.
Separating them will allow reuse for explicit fdc controller as well.

No functional impact apart from one extra allocation.

This allows to build libvirt under MinGW
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>