- 15 5月, 2014 1 次提交
-
-
由 Jiri Denemark 提交于
Coverity complains about event being leaked in qemuDomainCheckRemoveOptionalDisk. The best fix for it is to remove the disk directly since we already know its index. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 14 5月, 2014 4 次提交
-
-
由 Jiri Denemark 提交于
When qemu driver is polling for migration to finish (in qemuMigrationWaitForCompletion), it may happen that another job allowed during migration is running and if it does not finish within 30 seconds, migration would be cancelled because of that. However, we can just ignore the timeout and let the waiting loop try again later. If an event fired at the end of migration is ever implemented in QEMU, we can just wait for the event instead of polling for migration status and libvirt will behave consistently, i.e., migration won't be cancelled in case another job started during migration takes long time to finish. For bug https://bugzilla.redhat.com/show_bug.cgi?id=1083238Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
If job queue is full or waiting for a job times out, the function returns -2 so that it can be handled in a different way by callers. The change is safe since all existing callers of qemuDomainObjBeginNestedJob check the return value to be less than zero. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
It's only used within qemu_domain.c. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Roman Bogorodskiy 提交于
Move sharable PCI handling functions to domain_addr.[ch], and change theirs prefix from 'qemu' to 'vir': - virDomainPCIAddressAsString; - virDomainPCIAddressBusSetModel; - virDomainPCIAddressEnsureAddr; - virDomainPCIAddressFlagsCompatible; - virDomainPCIAddressGetNextSlot; - virDomainPCIAddressReleaseSlot; - virDomainPCIAddressReserveAddr; - virDomainPCIAddressReserveNextSlot; - virDomainPCIAddressReserveSlot; - virDomainPCIAddressSetFree; - virDomainPCIAddressSetGrow; - virDomainPCIAddressSlotInUse; - virDomainPCIAddressValidate; The only change here is function names, the implementation itself stays untouched. Extract common allocation code from DomainPCIAddressSetCreate into virDomainPCIAddressSetAlloc.
-
- 07 5月, 2014 1 次提交
-
-
由 Tomoki Sekiyama 提交于
Adds 'quiesced' status into qemuDomainObjPrivate that tracks whether FSFreeze is requested in the domain. It modifies error code from qemuDomainSnapshotFSFreeze and qemuDomainSnapshotFSThaw, so that a caller can know whether the command is actually sent to the guest agent. If the error is caused before sending a freeze command, a counterpart thaw command shouldn't be sent either, not to confuse fsfreeze status tracking. Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 06 5月, 2014 1 次提交
-
-
由 Julio Faracco 提交于
In "src/util/" there are many enumeration (enum) declarations. Sometimes, it's better using a typedef for variable types, function types and other usages. Other enumeration will be changed to typedef's in the future. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 01 5月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
To avoid memory leak of the "backingStoreRaw" field when reparsing backing chains a new function is being introduced by this patch that shall be used to clear backing store information. The memory leak was introduced in commit 8823272d.
-
- 29 4月, 2014 1 次提交
-
-
由 Martin Kletzander 提交于
Based on suggestion from Eric [1], because it might not get cleaned up before the release, so to avoid potential errors. [1] https://www.redhat.com/archives/libvir-list/2014-April/msg00929.htmlSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 24 4月, 2014 5 次提交
-
-
由 Martin Kletzander 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1019926 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868673Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
To avoid having the root of a backing chain present twice in the list we need to invert the working of virStorageFileGetMetadataRecurse. Until now the recursive worker created a new backing chain element from the name and other information passed as arguments. This required us to pass the data of the parent in a deconstructed way and the worker created a new entry for the parent. This patch converts this function so that it just fills in metadata about the parent and creates a backing chain element from those. This removes the duplication of the first element. To avoid breaking the test suite, virstoragetest now calls a wrapper that creates the parent structure explicitly and pre-fills it with the test data with same function signature as previously used.
-
由 Peter Krempa 提交于
Switch over to storing of the backing chain as a recursive virStorageSource structure. This is a string based move. Currently the first element will be present twice in the backing chain as currently the retrieval function stores the parent in the newly detected chain. This will be fixed later.
-
由 Peter Krempa 提交于
Replace the old structure with the new one. This change is a trivial name change operation (along with change of the freeing function).
-
由 Peter Krempa 提交于
The function isn't used in any other source file. Move it so that it doesn't need a declaration.
-
- 02 4月, 2014 1 次提交
-
-
由 Eric Blake 提交于
A continuation of the migration of disk details to virstoragefile. This patch moves a single enum, but converting the name has quite a bit of fallout. * src/conf/domain_conf.h (virDomainDiskType): Move... * src/util/virstoragefile.h (virStorageType): ...and rename. * src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr) (virBhyveProcessBuildLoadCmd): Update clients. * src/conf/domain_conf.c (virDomainDiskSourceDefParse) (virDomainDiskDefParseXML, virDomainDiskSourceDefFormatInternal) (virDomainDiskDefFormat, virDomainDiskGetActualType) (virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType): Likewise. * src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise. * src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML) (virDomainSnapshotAlignDisks, virDomainSnapshotDiskDefFormat): Likewise. * src/esx/esx_driver.c (esxAutodetectSCSIControllerModel) (esxDomainDefineXML): Likewise. * src/locking/domain_lock.c (virDomainLockManagerAddDisk): Likewise. * src/lxc/lxc_controller.c (virLXCControllerSetupLoopDeviceDisk) (virLXCControllerSetupNBDDeviceDisk) (virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk): Likewise. * src/parallels/parallels_driver.c (parallelsGetHddInfo): Likewise. * src/phyp/phyp_driver.c (phypDiskType): Likewise. * src/qemu/qemu_command.c (qemuGetDriveSourceString) (qemuDomainDiskGetSourceString, qemuBuildDriveStr) (qemuBuildCommandLine, qemuParseCommandLineDisk) (qemuParseCommandLine): Likewise. * src/qemu/qemu_conf.c (qemuCheckSharedDevice) (qemuTranslateDiskSourcePool) (qemuTranslateSnapshotDiskSourcePool): Likewise. * src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse) (qemuDomainDetermineDiskChain): Likewise. * src/qemu/qemu_driver.c (qemuDomainGetBlockInfo) (qemuDomainSnapshotPrepareDiskExternalBackingInactive) (qemuDomainSnapshotPrepareDiskExternalBackingActive) (qemuDomainSnapshotPrepareDiskExternalOverlayActive) (qemuDomainSnapshotPrepareDiskExternalOverlayInactive) (qemuDomainSnapshotPrepareDiskInternal) (qemuDomainSnapshotPrepare) (qemuDomainSnapshotCreateSingleDiskActive): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia): Likewise. * src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise. * src/security/security_apparmor.c (AppArmorRestoreSecurityImageLabel) (AppArmorSetSecurityImageLabel): Likewise. * src/security/security_dac.c (virSecurityDACSetSecurityImageLabel) (virSecurityDACRestoreSecurityImageLabelInt) (virSecurityDACSetSecurityAllLabel): Likewise. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt) (virSecuritySELinuxSetSecurityImageLabel) (virSecuritySELinuxSetSecurityAllLabel): Likewise. * src/storage/storage_backend.c (virStorageFileBackendForType): Likewise. * src/storage/storage_backend_fs.c (virStorageFileBackendFile) (virStorageFileBackendBlock): Likewise. * src/storage/storage_backend_gluster.c (virStorageFileBackendGluster): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives) (vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Likewise. * src/vmware/vmware_conf.c (vmwareVmxPath): Likewise. * src/vmx/vmx.c (virVMXParseDisk, virVMXFormatDisk) (virVMXFormatFloppy): Likewise. * src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr) (xenFormatSxprDisk): Likewise. * src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise. * tests/securityselinuxlabeltest.c (testSELinuxLoadDef): Likewise. * src/libvirt_private.syms (domain_conf.h): Move symbols... (virstoragefile.h): ...as appropriate. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 25 3月, 2014 2 次提交
-
-
由 Ján Tomko 提交于
-
由 Eric Blake 提交于
Part of a series of cleanups to use new accessor methods. * src/qemu/qemu_conf.c (qemuCheckSharedDevice) (qemuAddSharedDevice, qemuRemoveSharedDevice, qemuSetUnprivSGIO): Use accessors. * src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse) (qemuDomainObjCheckDiskTaint, qemuDomainSnapshotForEachQcow2Raw) (qemuDomainCheckRemoveOptionalDisk, qemuDomainCheckDiskPresence) (qemuDiskChainCheckBroken, qemuDomainDetermineDiskChain): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia) (qemuDomainCheckEjectableMedia) (qemuDomainAttachVirtioDiskDevice, qemuDomainAttachSCSIDisk) (qemuDomainAttachUSBMassstorageDevice) (qemuDomainAttachDeviceDiskLive, qemuDomainRemoveDiskDevice) (qemuDomainDetachVirtioDiskDevice, qemuDomainDetachDiskDevice): Likewise. * src/qemu/qemu_migration.c (qemuMigrationStartNBDServer) (qemuMigrationDriveMirror, qemuMigrationCancelDriveMirror) (qemuMigrationIsSafe): Likewise. * src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase) (qemuProcessHandleIOError, qemuProcessHandleBlockJob) (qemuProcessInitPasswords): Likewise. * src/qemu/qemu_driver.c (qemuDomainChangeDiskMediaLive) (qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 24 3月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
It's easy to shed the daemon these days. With this XML snippet: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/some/dummy/path/test.bin'> <seclabel model='dac' relabel='no'/> </source> <target dev='vdb' bus='virtio'/> <readonly/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </disk> I get the SIGSEGV when starting the domain. The thing is, when starting a domain, we check for its disk presence. For some reason, when determining the disk chain, we parse the <seclabel/> (don't ask me why). However, there's no label attribute in the XML, so we end up calling virParseOwnershipIds() over NULL string: [Switching to Thread 0x7ffff10c4700 (LWP 30956)] __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136 136 ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory. (gdb) bt #0 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136 #1 0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115 #2 0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385 #3 qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414 #4 0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250 #5 0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0, vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813 #6 0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051 #7 0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105 #8 0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861 Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 18 3月, 2014 2 次提交
-
-
由 Daniel P. Berrange 提交于
Any source file which calls the logging APIs now needs to have a VIR_LOG_INIT("source.name") declaration at the start of the file. This provides a static variable of the virLogSource type. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Martin Kletzander 提交于
Eliminate all the code re-use which checks for priv->agentError or priv->agent. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 14 3月, 2014 1 次提交
-
-
由 Laine Stump 提交于
Many of the domain xml format functions (including all of the device format functions) had hard-coded spaces, which made for incorrect indentation when those functions were called in a different context (for example, commit 2122cf39 added <interface> XML into the document provided to a network hook script, and in this case it should have been indented by 2 spaces, but was instead indented by 6 spaces). To make it possible to insert a properly indented device anywhere into an XML document, this patch removes hardcoded spaces from the formatting functions, and calls virBufferAdjustIndent() at appropriate places instead. (a regex search of domain_conf.c was done to assure that all occurrences of hardcoded spaces were removed). virDomainDiskSourceDefFormatInternal() is also called from snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily added around that call - those functions will have hardcoded spaces removed in a separate patch. This could cause some conflicts when backporting future changes to the formatting functions to older branches, but fortunately the changes are almost all trivial, so conflict resolution will be obvious.
-
- 10 3月, 2014 1 次提交
-
-
由 Ján Tomko 提交于
Some of these are leftovers from renaming the files, others are just typos. Also introduce an ugly awk script to enforce this.
-
- 19 2月, 2014 2 次提交
-
-
由 Oleg Strikov 提交于
This patch changes network device type used by default from rtl8139 to virtio when architecture type is aarch64 and machine type is virt. Qemu doesn't support any other machine types for aarch64 right now and we can't make any other aarch64-specific tuning in this function yet. Signed-off-by: NOleg Strikov <oleg.strikov@canonical.com>
-
由 Li Zhang 提交于
There is no keyboard working on PPC64 and PS2 mouse is only for X86 when graphics are enabled. Add a USB keyboard and USB mouse for PPC64 when graphics are enabled. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 17 2月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
Currently, there's just one place where we care if hook script is changing the domain XML: migration hook for incoming migration. In all other places where a hook script is executed, we don't read the XML back from the script. Anyway, the hook script can alter domain XML and hence we should taint it if the script did. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 10 2月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
The code took into account only the global permissions. The domains now support per-vm DAC labels and per-image DAC labels. Use the most specific label available.
-
- 07 1月, 2014 1 次提交
-
-
由 Pranavkumar Sawargaonkar 提交于
AArch64 qemu has similar behavior as armv7l, like use of mmio etc. This patch adds similar bypass checks what we have for armv7l to aarch64. E.g. we are enabling mmio transport for Nicdev. Making addDefaultUSB and addDefaultMemballoon to false etc. V3: - Adding missing domain rng schema for aarcg64 and test case in testutilsqemu.c which was causing test suite failure while running make check. V2: - Added testcase to qemuxml2argvtest as suggested during review comments of V1. V1: - Initial patch. Signed-off-by: NAnup Patel <anup.patel@linaro.org> Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
-
- 10 12月, 2013 2 次提交
-
-
由 Cédric Bosdonnat 提交于
The virDomainEvent class is kept as it indicates what meta informations are valid for the children classes. This may be useful in the future.
-
由 Cédric Bosdonnat 提交于
Leave virDomainEventRegister and its Deregister brother as these are legacy functions only for domain lifecycle events.
-
- 21 11月, 2013 1 次提交
-
-
由 Clark Laughlin 提交于
These changes allow the correct virtio-blk-device and virtio-net-device devices to be used for the 'virt' machine type for armv7 rather than the PCI virtio devices. A test case was added to qemuxml2argvtest for this change. Signed-off-by: NClark Laughlin <clark.laughlin@linaro.org>
-
- 01 11月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
In debugging a recent oVirt/libvirt race condition, I was very frustrated by lack of logging in the job enter/exit code. This patch adds some key data which would have been useful in by debugging attempts. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 17 10月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
The last argument of memmove is the amount of bytes to be moved. The amount is in Bytes. We are moving some void pointers around. However, since sizeof(void *) is not Byte on any architecture, we've got the arithmetic wrong.
-
- 15 10月, 2013 1 次提交
-
-
由 Eric Blake 提交于
'const fooPtr' is the same as 'foo * const' (the pointer won't change, but it's contents can). But in general, if an interface is trying to be const-correct, it should be using 'const foo *' (the pointer is to data that can't be changed). Fix up offenders in src/conf/domain_conf, and their fallout. Several things to note: virObjectLock() requires a non-const argument; if this were C++, we could treat the locking field as 'mutable' and allow locking an otherwise 'const' object, but that is a more invasive change, so I instead dropped attempts to be const-correct on domain lookup. virXMLPropString and friends require a non-const xmlNodePtr - this is because libxml2 is not a const-correct library. We could make the src/util/virxml wrappers cast away const, but I figured it was easier to not try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy was a rather hard conversion - it calls virDomainDeviceDefPostParse, which in turn in the xen driver was actually modifying the domain outside of the current device being visited. We should not be adding a device on the first per-device callback, but waiting until after all per-device callbacks are complete. * src/conf/domain_conf.h (virDomainObjListFindByID) (virDomainObjListFindByUUID, virDomainObjListFindByName) (virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at const. (virDomainDeviceDefCopy): Use intended type. (virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback) (virDomainVideoDefaultType, virDomainVideoDefaultRAM) (virDomainChrGetDomainPtrs): Make const-correct. * src/conf/domain_conf.c (virDomainObjListFindByID) (virDomainObjListFindByUUID, virDomainObjListFindByName) (virDomainDeviceDefCopy, virDomainObjListAdd) (virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML) (virDomainHostdevSubsysPciOrigStatesDefParseXML) (virDomainHostdevSubsysPciDefParseXML) (virDomainHostdevSubsysScsiDefParseXML) (virDomainControllerModelTypeFromString) (virDomainTPMDefParseXML, virDomainTimerDefParseXML) (virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML) (virDomainWatchdogDefParseXML, virDomainRNGDefParseXML) (virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML) (virSysinfoParseXML, virDomainVideoAccelDefParseXML) (virDomainVideoDefParseXML, virDomainHostdevDefParseXML) (virDomainRedirdevDefParseXML) (virDomainRedirFilterUsbDevDefParseXML) (virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort) (virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML) (virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy) (virDomainVideoDefaultType, virDomainHostdevAssignAddress) (virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse) (virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit) (virDomainSCSIDriveAddressIsUsed) (virDomainDriveAddressIsUsedByDisk) (virDomainDriveAddressIsUsedByHostdev): Fix fallout. * src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse): Likewise. * src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse): Likewise. * src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse) (qemuDomainDefaultNetModel): Likewise. * src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse): Likewise. * src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise. * src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split... (xenDomainDefPostParse): ...since per-device callback is not the time to be adding a device. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 11 10月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=994364 Whenever we check for ABI stability, we have new xml (e.g. provided by user, or obtained from snapshot, whatever) which we compare to old xml and see if ABI won't break. However, if the new xml was produced via virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some devices, e.g. 'pci-root' controller. Hence, the ABI stability check fails even though it is stable. Moreover, we can't simply fix virDomainDefCheckABIStability because removing the correct devices is task for the driver. For instance, qemu driver wants to remove the usb controller too, while LXC driver doesn't. That's why we need special qemu wrapper over virDomainDefCheckABIStability which removes the correct devices from domain XML, produces MIGRATABLE xml and calls the check ABI stability function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 25 9月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
If qemuParseCommandLine finds an arg it does not understand it adds it to the QEMU passthrough custom arg list. If the qemuParseCommandLine method hits an error for any reason though, it just does 'VIR_FREE(cmd)' on the custom arg list. This means all actual args / env vars are leaked. Introduce a qemuDomainCmdlineDefFree method to be used for cleanup. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 05 9月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
The VIR_FREE() macro will cast away any const-ness. This masked a number of places where we passed a 'const char *' string to VIR_FREE. Fortunately in all of these cases, the variable was not in fact const data, but a heap allocated string. Fix all the variable declarations to reflect this. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 03 9月, 2013 3 次提交
-
-
由 Cole Robinson 提交于
Similar to the chardev bit, ARM boards depend on the old style '-net nic' for actually instantiating net devices. But we can't block out -netdev altogether since it's needed for upcoming virtio support. And add tests for working ARM XML with console, disk, and networking.
-
由 Cole Robinson 提交于
And add test cases for a basic working ARM guest.
-
由 Cole Robinson 提交于
This should be a no-op change for now.
-
- 19 8月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
This function is to guess the correct limit for maximal memory usage by qemu for given domain. This can never be guessed correctly, not to mention all the pains and sleepless nights this code has caused. Once somebody discovers algorithm to solve the Halting Problem, we can compute the limit algorithmically. But till then, this code should never see the light of the release again.
-