Tmpfs relative size and default 50% size values aren't supported as
we have no idea of the available memory at the conversion time.

Wire up the new virDomainCreate{XML}WithFiles methods in the
LXC driver, so that FDs get passed down to the init process.

The lxc_container code needs to do a little dance in order
to renumber the file descriptors it receives into linear
order, starting from STDERR_FILENO + 1.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

lxc driver will use this function to change the owner
of hot added devices.

Move virLXCControllerChown to lxc_container.c and Rename
it to lxcContainerChown.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

This helper function is used to create parent directory for
the hostdev which will be added to the container. If the
parent directory of this hostdev doesn't exist, the mknod of
the hostdev will fail. eg with /dev/net/tun
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Move the veth device name state into the virLXCControllerPtr
object and stop passing it around. Also use size_t instead
of unsigned int for the array length parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For the sake of backwards compat, LXC guests are *not*
confined by default. This is because it is not practical
to dynamically relabel containers using large filesystem
trees. Applications can create confined containers though,
by giving suitable XML configs

* src/Makefile.am: Link libvirt_lxc to security drivers
* src/lxc/libvirtd_lxc.aug, src/lxc/lxc_conf.h,
  src/lxc/lxc_conf.c, src/lxc/lxc.conf,
  src/lxc/test_libvirtd_lxc.aug: Config file handling for
  security driver
* src/lxc/lxc_driver.c: Wire up security driver functions
* src/lxc/lxc_controller.c: Add a '--security' flag to
  specify which security driver to activate
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Set
  the process label just before exec'ing init.

Currently the LXC controller only supports setup of a single
text console. This is wired up to the container init's stdio,
as well as /dev/console and /dev/tty1. Extending support for
multiple consoles, means wiring up additional PTYs to /dev/tty2,
/dev/tty3, etc, etc. The LXC controller is passed multiple open
file handles, one for each console requested.

* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Wire up
  all the /dev/ttyN links required to symlink to /dev/pts/NN
* src/lxc/lxc_container.h: Open more container side /dev/pts/NN
  devices, and adapt event loop to handle I/O from all consoles
* src/lxc/lxc_driver.c: Setup multiple host side PTYs

Add a handshake with the cloned container process to try and detect
if it fails to start.

Add a simple handshake with the lxc_controller process so we can detect
process startup failures. We do this by adding a new --handshake cli arg
to lxc_controller for passing a file descriptor. If the process fails to
launch, we scrape all output from the logfile and report it to the user.

Using the 'personality(2)' system call, we can make a container
on an x86_64 host appear to be i686. Likewise for most other
Linux 64bit arches.

* src/lxc/lxc_conf.c: Fill in 32bit capabilities for x86_64 hosts
* src/lxc/lxc_container.h, src/lxc/lxc_container.c: Add API to
  check if an arch has a 32bit alternative
* src/lxc/lxc_controller.c: Set the process personality when
  starting guest

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

When using the 'ns' cgroup controller, the moment a process calls
'unshare(CLONE_NEWNS)', it will be given a private cgroup tree
under its current location. This really messages up the LXC
controller process, because it ends up creating the containers'
cgroup in the wrong place. The fix is fairly easy, just move
the cgroup setup before the code which calls unshare(). The
'ns' controller will still create extra undesired cgroups, but
they at least won't break libvirt's setup now.

The patch also adds a missing cgroups allow rule for /dev/tty
device node

* src/lxc_conf.c, src/lxc_conf.h, src/lxc_container.c,
  src/lxc_container.h, src/lxc_controller.c, src/lxc_driver.c,
  src/lxc_driver.h, src/veth.c, src/veth.h: Move to src/lxc/
* src/opennebula/one_driver.c: Remove bogus veth.h include
* src/Makefile.am: Adjust for lxc paths
* daemon/qemud.c: Adjust include for lxc

* src/lxc_container.c src/lxc_container.h: cope with kernels
  where CLONE_NEWUSER is not supported, patch by Serge Hallyn
daniel

Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'

  src/lxc_container.h src/lxc_driver.c: Applied second set of
  linux container patches from Dave Leskovec adding start/stop
  of domains
Daniel

* configure.in include/libvirt/virterror.h src/Makefile.am
  src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
  Applied 3 patches from Dave Leskovec for intial support of
  Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel

Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.

	* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h,
	  src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more
	  of qemu if configured --without-qemu.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel