Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU's command line equivalent for the following domain XML fragment
    <vcpus>2</vcpus>
    <cpu ...>
        ...
        <topology sockets='1' cores='2', threads='1'/>
    </cpu>

is

    -smp 2,sockets=1,cores=2,threads=1

This syntax was introduced in QEMU-0.12.

Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing

Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Current version expects name=value,... list and when an incorrect string
such as "a,b,c=d" would be parsed as "a,b,c" keyword with "d" value
without reporting any error, which is probably not the expected
behavior.

This patch adds an extra argument called allowEmptyValue, which if
non-zero will permit keywords with no value; "a,b=c,,d=" will be parsed
as follows:
    keyword value
    "a"     NULL
    "b"     "c"
    ""      NULL
    "d"     ""

In case allowEmptyValue is zero, the string is required to contain
name=value pairs only; retvalues is guaranteed to contain non-NULL
pointers. Now, "a,b,c=d" will result in an error.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Replace

   -balloon virtio

With

   -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3

This allows it to get correct assigned PCI address as declared in
previous patch

 * src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
   give it an explicit PCI address
 * tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
   where appropriate

Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest.  These addresses are not stable across reboots. That will
come in a later patch

NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.

* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
  addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
  they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
  to include PCI slot/bus information

QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none

* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
  handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
  tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
  data files

Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
  flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests

The old syntax was

   -chardev SOMECONFIG
   -nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV

The new syntax is

   -chardev SOMECONFIG
   -netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID

The old syntax is

  -pcidevice host=BUS:SLOT:FUNCTION

The new syntax is

  -device pci-assign,host=BUS:SLOT:FUNCTION,addr=<PCI SLOT>,id=host0

The old syntax was

   -usbdevice host:PRODUCT:VENDOR

Or

   -usbdevice host:BUS.DEV

The new syntax is

   -device usb-host,product=PRODUCT,vendor=VENDOR

Or

   -device usb-host,hostbus=BUS,hostaddr=DEV

The previous syntax was severely limited in its options

  -usbdevice disk:/home/berrange/output.img

The new syntax is the same as for other disk types

  -drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
  -device usb-storage,drive=usb-1

Again, the index= arg is wrong here, and will be removed in a
later merge

The current syntax uses a pair of args

   -net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
   -net user,vlan=3,name=user.0

The new syntax does not  need the vlan craziness anymore, and
so has a simplified pair of args

   -netdev user,id=user.0
   -device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>

The current preferred syntax for disk drives uses

  -drive file=/vms/plain.qcow,if=virtio,index=0,boot=on,format=qcow

The new syntax splits this up into a pair of linked args

  -drive file=/vms/plain.qcow,if=none,id=drive-virtio-0,format=qcow2
  -device virtio-blk-pci,drive=drive-virtio-0,id=virtio-0,addr=<PCI SLOT>

SCSI/IDE devices also get a bus property linking them to the
controller

  -device scsi-disk,drive=drive-scsi0-0-0,id=scsi0-0-0,bus=scsi0.0,scsi-id=0
  -device ide-drive,drive=drive-ide0-0-0,id=ide0-0-0,bus=ide0,unit=0

The current syntax for audio devices is a horrible multiplexed
arg

    -soundhw sb16,pcspk,ac97

The new syntax is

    -device sb16,id=sound0

or

    -device AC97,id=sound1,addr=<PCI SLOT>

NB, pcspk still uses the old -soundhw syntax

The current syntax for watchdogs is

    -watchdog i6300esb

The new syntax will now be

    -device i6300esb,id=watchdogNN,addr=<PCI-SLOT>

The current character device syntax uses either

  -serial tty,path=/dev/ttyS2

Or

  -chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0

With the new -device support, we now prefer

  -chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0

This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.

The monitor device changes to

  -chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor

In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off

When starting a guest, give every device a unique alias. This will
be used for the 'id' parameter in -device args in later patches.
It can also be used to uniquely identify devices in the monitor

For old QEMU without -device, assign disk names based on QEMU's
historical naming scheme.

* src/qemu/qemu_conf.c: Assign unique device aliases
* src/qemu/qemu_driver.c: Remove obsolete qemudDiskDeviceName
  and use the device alias in eject & blockstats commands

Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU

This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'.  These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.

The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.

The XML syntax is

   <alias name="video0"/>

This may appear in any type of device that supports device info.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
  field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
  standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown

The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment

* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
  Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
  PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown

Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already

 * src/qemu/qemu_monitor_text.c: Don't free const string in
   qemuMonitorTextGetPtyPaths()

Hotunplug of devices requires that we know their PCI address. Even
hotplug of SCSI drives, required that we know the PCI address of
the SCSI controller to attach the drive to. We can find this out
by running 'info pci' and then correlating the vendor/product IDs
with the devices we booted with.

Although this approach is somewhat fragile, it is the only viable
option with QEMU < 0.12, since there is no way for libvirto set
explicit PCI addresses when creating devices in the first place.
For QEMU > 0.12, this code will not be used.

* src/qemu/qemu_driver.c: Assign all dynamic PCI addresses on
  startup of QEMU VM, matching vendor/product IDs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API for fetching PCI device address mapping

The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.

If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.

This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.

NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.

A future QEMU will allow proper SCSI hotunplug of a drive.

This patch is derived from work done by Wolfgang Mauerer on disk
controllers.

* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
 the correct controller, instead of just attaching a new
  controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for 'drive_add' command

This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.

This patch is derived from Wolfgang Mauerer's disk controller
patch series.

* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
  controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  new API for attaching PCI SCSI controllers

qemudFindCharDevicePTYsMonitor reports an error if 'info chardev' didn't
provide information for a requested device, even if the log output parsing
had found the pty path for that device. This makes pty assignment fail for
older QEMU/KVM versions. For example KVM 72 on Debian doesn't support
'info chardev', so qemuMonitorTextGetPtyPaths cannot parse any useful
information and the hash for device-id-to-pty-path mapping stays empty.

Make qemudFindCharDevicePTYsMonitor report an error only if the log output
parsing and the 'info chardev' parsing failed to provide the pty path.

* src/qemu/qemu_monitor_json.c: We fill in the PCI function number
   now, so remove obsolete XXX comment

The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.

In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.

Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.

* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
  disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
  using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks

To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
  for building -drive arg string

Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change

* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
  src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
  take an explicit address ptr for all host/guest addresses

When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files

All guest devices now use a common device address structure
summarized by:

  enum virDomainDeviceAddressType {
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
  };

  struct _virDomainDevicePCIAddress {
    unsigned int domain;
    unsigned int bus;
    unsigned int slot;
    unsigned int function;
  };

  struct _virDomainDeviceInfo {
    int type;
    union {
        virDomainDevicePCIAddress pci;
    } addr;
  };

This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.

  <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>

The structure definition is based on Wolfgang Mauerer's disk
controller patch series.

* docs/schemas/domain.rng: Define the <address> syntax and
  associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: APIs for parsing/formatting address
  information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
  new standardized format.

Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450

This way we won't squash the original error report in
MigratePerform, as is done for P2P and Tunneled migration.

qemudWaitForMonitor calls qemudReadLogOutput with qemudFindCharDevicePTYs
as callback. qemudFindCharDevicePTYs calls qemudExtractTTYPath to assign
a string to chr->data.file.path. Afterwards qemudWaitForMonitor may call
qemudFindCharDevicePTYsMonitor that overwrites chr->data.file.path without
freeing the old value. This results in leaking the memory allocated by
qemudExtractTTYPath.

Report an OOM error if the strdup in qemudFindCharDevicePTYsMonitor fails.

The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.

* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
  when using large pages

The behavior for the qemu balloon device has changed.  Formerly, a virtio
balloon device was provided by default.  Now, '-balloon virtio' must be
specified on the command line to enable it.  This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
  add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection

This change makes the 'info chardev' parser ignore any trailing
whitespace on a line. This fixes a specific problem handling a '\r\n'
line ending.

* src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in
  'info chardev' output.