- 05 8月, 2009 3 次提交
-
-
由 Maximilian Wilhelm 提交于
* configure.in: make it check by default for both
-
由 Maximilian Wilhelm 提交于
* configure.in: UML support requires sys/inotify.h so make it check by default.
-
由 Maximilian Wilhelm 提交于
* configure.in: if libcurl is not present ESX should be desactivated so default to check for esx
-
- 25 7月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* autobuild.sh: Disable esx/phyp build on mingw32 * configure.in: Fix handling of --without-phyp so it actually works * libvirt.spec.in: Add missing interface.rng * mingw32-libvirt.spec.in: Disable phyp/esx drivers * src/phyp/phyp_driver.c: Fix missing i18n of error messages
-
- 24 7月, 2009 2 次提交
-
-
由 Eduardo Otubo 提交于
Features supported: - Connects to HMC/VIOS or IVM systems. - Life cycle commands (resume and shutdown). - dumpxml - 'list' and 'list --all' What is being implemented: - better and centralized control for UUID - definexml - CPU management commands * src/domain_conf.c src/domain_conf.h: first version of the driver * configure.in src/Makefile.am include/libvirt/virterror.h src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver in the general framework
-
由 Matthias Bolte 提交于
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client to talk to the VI services on ESX nodes. * configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h src/libvirt.c src/virterror.c: glue in the new driver
-
- 17 7月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* configure.in: Add --with-qemu-user and --with-qemu-group args * libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12 * qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug, src/qemu.conf: Add 'user' and 'group' args for configuration * src/Makefile.am: Create %localstatedir/cache/libvirt/qemu * src/qemu_conf.c, src/qemu_conf.h: Load user/group from config * src/qemu_driver.c: Change user ID/group ID when launching QEMU guests. Change user/group ownership on disks/usb/pci devs. Put memory dumps in %localstatedir/cache/libvirt/qemu * src/util.c, src/util.h: Add convenient APIs for converting username/groupname to user ID / group ID
-
- 08 7月, 2009 1 次提交
-
-
由 Jim Meyering 提交于
Don't use mylibtool, (subsumed by automake's silent rules) Its use was causing a non-srcdir build to fail. * Makefile.am (EXTRA_DIST): Remove mylibtool. * configure.in: Don't use mylibtool. * configure.in: Use AM_SILENT_RULES([yes]), but only if that m4 macro is defined. Thus, it works even on systems that lack automake-1.11. Daniel Berrange suggested adding the conditional, so that we don't have a hard requirement on 1.11, e.g., for RHEL5.
-
- 03 7月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in libvirt.spec.in NEWS docs/* po/*: release of libvirt-0.6.5 * .gitignore: adding cscope files Daniel
-
- 29 6月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 25 6月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in libvirt.spec.in src/Makefile.am src/opennebula/one_client.[ch] src/opennebula/one_conf.h src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula, avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel and build it by default, based on patch by Javier Fontan and DanB suggestions Daniel
-
- 11 6月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in src/libvirt_private.syms src/storage_backend_fs.c src/util.c src/util.h: find and use kvm-img, qemu-img or qcow-create dynamically at runtime, patch by Doug Goldstein * AUTHORS: add Doug Goldstein Daniel
-
- 30 5月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in libvirt.spec.in NEWS docs/* po/*: release of libvirt-0.6.4 * src/libvirt.c src/virterror.c: some comments cleanups Daniel
-
- 25 5月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]: the OpenNebula driver * configure.in include/libvirt/virterror.h qemud/Makefile.am qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h src/libvirt.c src/virterror.c: integration of the OpenNebula driver in the libvirt infrastructure * AUTHORS: add Abel Miguez Rodriguez daniel
-
- 20 5月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in include/libvirt/libvirt.h[.in] include/libvirt/virterror.h qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h qemud/remote_dispatch_table.h qemud/remote_protocol.[chx] src/Makefile.am src/datatypes.c src/datatypes.h src/driver.h src/libvirt.c src/remote_internal.c src/virterror.c src/libvirt_private.syms src/libvirt_public.syms: Add the Interface config APIs and remote stubs for those, patch by Laine Stump * AUTHORS: add Laine daniel
-
- 19 5月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 12 5月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 4月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* NEWS configure.in libvirt.spec.in docs/*: release of 0.6.3 * po/*: regenerated * src/libvirt.c src/virterror.c: fixed some function comments Daniel
-
- 19 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 18 4月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in include/libvirt/virterror.h src/Makefile.am src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch] src/vbox/vbox_tmpl.c: integration of the VirtualBox support patches by Pritesh Kothari Daniel
-
- 03 4月, 2009 2 次提交
-
-
由 Daniel Veillard 提交于
* configure.in libvirt.spec.in NEWS docs/*: release of 0.6.2 * po/*: Gujarati and Polish updates, rebuild * AUTHORS: add one missing Daniel
-
由 Daniel P. Berrange 提交于
-
- 02 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 01 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 20 3月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* src/libvirt_private.syms src/storage_backend_fs.c src/util.c src/util.h: use posix_fallocate() on supported systems to allocate diskspace faster, patches by Amit Shah Daniel
-
- 04 3月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
release of 0.6.1 * po/*: rebuilt * AUTHORS: updated to list new contributors Daniel
-
- 03 3月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel Veillard 提交于
* configure.in po/POTFILES.in src/Makefile.am src/libvirt_private.syms src/pci.c src/pci.h: Add implementations of dettach, reattach and reset for PCI devices, patch by Mark McLoughlin Daniel
-
- 27 2月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* Makefile.am configure.in examples/hellolibvirt/Makefile.am examples/hellolibvirt/hellolibvirt.c: new trivial example program by David Allan Daniel
-
- 17 2月, 2009 1 次提交
-
-
由 Jim Meyering 提交于
* configure.in: Enable internal WITH_BRIDGE support not just for LXC or QEMU, but also for --with-network. Russell Haering reported that compilation failed when configured with --without-lxc --without-qemu. Details: http://thread.gmane.org/gmane.comp.emulators.libvirt/11928 * src/bridge.h: Use #if WITH_BRIDGE, rather than currently-equivalent "#if defined(WITH_QEMU) || defined(WITH_LXC)"
-
- 31 1月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in docs/* NEWS: release of 0.6.0 * po/*: regenerated and updated brazilian and polish localizations daniel
-
- 29 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 27 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 23 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 21 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 20 1月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel Veillard 提交于
for the Xen specific version of RHEL-5, patch by Markus Armbruster daniel
-
- 09 1月, 2009 1 次提交
-
-
由 John Levon 提交于
-
- 05 1月, 2009 2 次提交
-
-
由 Jim Meyering 提交于
* configure.in (WITH_LINUX): New automake conditional. * src/Makefile.am (PRIVSYMFILES) [WITH_LINUX]: Append libvirt_linux.syms. * src/libvirt_private.syms: Move two symbol names into... * src/libvirt_linux.syms: ...this new file. Author: John Levon
-
由 Jim Meyering 提交于
* configure.in: Provide a new --with-bridge option. * src/Makefile.am (PRIVSYMFILES) [WITH_BRIDGE]: Append libvirt_bridge.syms. * src/bridge.c: Test WITH_BRIDGE rather than particular drivers. * src/libvirt_private.syms: Move bridge-related symbols into... * src/libvirt_bridge.syms: ...this new file. Author: John Levon
-