This patch introduces a dependency on libnl, which subsequent patches
will then use.

Changes from V1 to V2:
- added diffstats
- following changes in tree

Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:

https://bugzilla.redhat.com/show_bug.cgi?id=494005
https://bugzilla.redhat.com/show_bug.cgi?id=593565

Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.

v2: Leading // must be preserved, properly sanitize path=/, sanitize
    away /./ -> /

v3: Properly handle starting ./ and ending /.

v4: Drop all '.' handling, just sanitize / for now.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk

* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
  and add missing teardown code in unplug path

Basic live migration was broken by the commit that added
non-shared block support in two ways:

1)  It added a virCheckFlags() to doNativeMigrate().  Besides
the fact that typical usage of virCheckFlags() is in driver
entry points, and doNativeMigrate() is not an entry point,
it was missing important flags like VIR_MIGRATE_LIVE.  Move
the virCheckFlags to the top-level qemuDomainMigratePrepare2
and friends.

2)  It also added a memory leak in qemuMonitorTextMigrate()
by not freeing the memory used by virBufferContentAndReset().
This is fixed by storing the pointer in a temporary variable
and freeing it at the end.

With this patch in place, normal live migration works again.

v3: Instead of the churn for virCheckFlagsUI and UL, instead
always promote flags to an unsigned long and always use %lx
for the fprintf.
v2: Add back flags check, which required adding virCheckFlagsUI
and virCheckFlagsUL
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.

Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.

v2: Fix doc typos, change name to vnc_allow_host_audio

Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++.  Move
them inside of the braces, which should fix the problem.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This patch adds documentation of the nwfilter subsystem of libvirt to
the existing (web) docs.

git shortlog $(git log -1 --format=%H AUTHORS).. | grep -v "^ "

then add missing entries to AUTHORS.

* AUTHORS: Update.

Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The device path doesn't make use of guestAddr, so the memcpy corrupts
the guest info struct.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The virDomainGetBlockInfo API allows query physical block
extent and allocated block extent. These are normally the
same value unless storing a special format like qcow2
inside a block device. In this scenario we can query QEMU
to get the actual allocated extent.

Since last time:

 - Return fatal error in text monitor
 - Only invoke monitor command for block devices
 - Fix error handling JSON code

* src/qemu/qemu_driver.c: Fill in block aloction extent when VM
  is running
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API to query the highest block extent via info blockstats

* src/lxc/lxc_driver.c (lxcSetSchedulerParameters): Ensure that
"->field" is "cpu_shares" before possibly giving a diagnostic about
a type for a "cpu_shares" value.
Also, virCgroupSetCpuShares could fail without evoking a diagnostic.
Add one.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Volume detection in the scsi backend was duplicating code already
present in storage_backend.c. Let's drop the duplicate code.

Also, change the shared function name to be less generic, and remove
some error squashing in the other call site.

We were squashing error messages in a few cases. Recode to follow common
ret = -1 convention.

v2: Handle more error squashing issues further up in MakeNewVol and
    CreateVols. Use ret = -1 convention in MakeVols.

The event is already generated and sent by qemudDomainObjStart, no need
to do anything about here.

Some diagnostics had a hard-coded "libvirtd: " prefix, some used
"error: " and some used "argv[0]: ".  Always use "argv[0]: ".
* daemon/libvirtd.c (argv0): New global.
(main): Set it.
(version, usage): Remove argv0 parameter.  Use global; update callers.
(daemonForkIntoBackground): Use argv0:, not error:.
(qemudWritePidFile): Start each diagnostic with argv0:.
Suggested by Eric Blake.

* daemon/libvirtd.c (daemonForkIntoBackground, main): Mark strings
for translation.
(usage): Rework --help so that it is translatable, replacing
each embedded, configuration-dependent, macro with an `%s'.

libvirtd: don't ignore virInitialize failure
* daemon/libvirtd.c (main): Diagnose virInitialize failure
and exit nonzero.

* src/util/bitmap.h (includes): Placate cppi.

Otherwise, './configure --prefix=/foo && make &&
 ./configure --prefix=/bar && make' leaves the wrong files
in libvirtd.init (/foo instead of /bar).

* daemon/Makefile.am (libvirtd.init): Add dependency on
config.status.  Reported by Cole Robinson.

Instead of distributing the individual files.

Now it's less error prone and consistent with the rest of
the data directories in the tests directory.

The qemu driver contains a subtle race in the logic to find next
available vnc port.  Currently it iterates through all available ports
and returns the first for which bind(2) succeeds.  However it is possible
that a previously issued port has not yet been bound by qemu, resulting
in the same port used for a subsequent domain.

This patch addresses the race by using a simple bitmap to "reserve" the
ports allocated by libvirt.

V2:
  - Put port bitmap in struct qemud_driver
  - Initialize bitmap in qemudStartup

V3:
  - Check for failure of virBitmapGetBit
  - Additional check for port != -1 before calling virbitmapClearBit

V4:
  - Check for failure of virBitmap{Set,Clear}Bit

V2:
  - Move bitmap impl to src/util/bitmap.[ch]
  - Use CHAR_BIT instead of explicit '8'
  - Use size_t instead of unsigned int
  - Fix calculation of bitmap size in virBitmapAlloc
  - Ensure bit is within range of map in the set, clear, and get
    operations
  - Use bool in virBitmapGetBit
  - Add virBitmapFree to free-like funcs in cfg.mk

V3:
  - Check for overflow in virBitmapAlloc
  - Fix copy and paste bug in virBitmapAlloc
  - Use size_t in prototypes
  - Add ATTRIBUTE_NONNULL in prototypes where appropriate
    and remove NULL check from impl

V4:
  - Add ATTRIBUTE_RETURN_CHECK in prototypes where appropriate.

/etc/sysconfig/libvirtd has a few environment variables for configuring
libvirt SDL audio. The libvirtd process doesn't see these, however, because
they are never exported. Let's export the variables after sourcing the
sysconfig script.

There is another problem here that the commented out values in the
sysconfig script are not neccessarily the actual defaults, we are qemus
mercy here. Not sure how to solve that.

We shouldn't be checking validity in domain_conf, since
it can be used by multiple different hosts and hypervisors.
Remove the check completely.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Example output during shutdown:

Running guests on default URI: console, rhel6-1, rhel5-64
Running guests on lxc:/// URI: lxc-shell
Running guests on xen:/// URI: error: no hypervisor driver available for xen:///
error: failed to connect to the hypervisor
Running guests on vbox+tcp://orkuz/system URI: no running guests.
Suspending guests on default URI...
Suspending console: done
Suspending rhel6-1: done
Suspending rhel5-64: done
Suspending guests on lxc:/// URI...
Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state
error: this function is not supported by the hypervisor: virDomainManagedSave

Note, the "Suspending $guest: " shows progress during the suspend phase
if domjobinfo gives meaningful output.

Example output during boot:

Resuming guests on default URI...
Resuming guest rhel6-1: done
Resuming guest rhel5-64: done
Resuming guest console: done
Resuming guests on lxc:/// URI...
Resuming guest lxc-shell: already active

Configuration used for generating the examples above:
URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system'

The script uses /var/lib/libvirt/libvirt-guests files to note all active
guest it should try to resume on next boot. It's content looks like:

default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c
lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b

We need a common internal function for starting managed domains to be
used during autostart. This patch factors out relevant code from
qemudDomainStart into qemudDomainObjStart and makes it use the
refactored code for domain restore instead of calling qemudDomainRestore
API directly.

We need to be able to assign new def to an existing virDomainObj which
is already locked. This patch factors out the relevant code from
virDomainAssignDef into virDomainObjAssignDef.

We need to be able to restore a domain which we already locked and
started a job for it without undoing these steps. This patch factors
out internals of qemudDomainRestore into separate functions which work
for locked objects.

* po/POTFILES.in: Add 3 files.

* cfg.mk (sc_prohibit_gettext_markup): Just like VIR_WARN*.

Run this command:
  git grep -l VIR_DEBUG|xargs perl -pi -e \
    's/(VIR_DEBUG0?)\s*\(_\((".*?")\)/$1($2/'

* cfg.mk (msg_gen_function): Add VIR_ERROR and VIR_ERROR0,
so that sc_libvirt_unmarked_diagnostics will check them, too.

These changes avoid false-positive syntax-check failure,
and also make the resulting diagnostics more comprehensible.