This adds some generic virinterfaceobj code, roughly matching what
is used by other stateful drivers like network, storage, etc.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

If a domain is configured to start on boot, it has a symlink to the
domain definition inside the autostart directory. If you rename this
domain, the definition is renamed too. The symlink need to be pointed to
this renamed file. This commit recreates the symlink after renaming the
XML file.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1594985Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

virCopyLastError is intended to be used after last error is set.
However due to virLastErrorObject failures (very unlikely though
as thread local error is allocated on first use) we can have zero
fields in a copy as a result. In particular code field can be set
to VIR_ERR_OK.

In some places (qemu monitor, qemu agent and qemu migaration code
for example) we use copy result as a flag and this leads to bugs.

Let's set OOM-like error in copy in case of virLastErrorObject failures.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

The test targets result in the qemu-sanlock.conf file being created
when sanlock is enabled, even if QEMU is not enabled. As a result it
never gets cleaned up when distclean is run, breaking distcheck.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Currently it reads:
Refer MDEV to create a mediated device on the host

...even though it resembles English, it's not a proper English.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').

This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The exit path is the same for both success and failure, so the label
should be called cleanup.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A simple helper which will loop through all the graphics elements and
checks whether at least one of them enables OpenGL support, either by
containing <gl enable='yes'/> or being of type 'egl-headless'.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU 2.12 introduced a new vfio-pci device option 'display=on/off/auto'.
This patch introduces the necessary capability.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since QEMU 2.10, it's possible to use a new type of display -
egl-headless which uses drm nodes to provide OpenGL support. This patch
adds a capability for that. However, since QEMU doesn't provide a QMP
command to probe it, we have to base the capability on specific QEMU
version.
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Decrease the number of accessors we have to use.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.

Use this constant to guard tests that depend on stable ordering.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

If the QEMU driver was requested, require Jansson, since we need to use
the JSON monitor to probe capabilities for all QEMU version supported
by libvirt.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Unless explicitly requested, enable the QEMU driver
only if the Jansson library is present.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

It is no longer used.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

We no longer allow building WITH_YAJL, remove the remaining
uses of the macro.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

We no longer support building WITH_YAJL, remove the dead code
as well as the virJSONParser structures that are no longer used.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.

All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versions
https://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson

Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.

Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.

Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

There is no code using WITH_JANSSON yet, but once we add it,
it should not be compiled for the setuid_rpc_client.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Introduce the configure argument and check for Jansson >= 2.5
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:

commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author:     Daniel P. Berrange <berrange@redhat.com>

    ui: convert VNC server to use QCryptoTLSSession

Use the tls-creds-x509 object when available.

https://bugzilla.redhat.com/show_bug.cgi?id=1598167Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add a test with QEMU 2.4.0 capabilites, as well as the latest caps.

The code paths for formatting TLS options will be altered and
2.4.0 is the newest version where QEMU_CAPS_OBJECT_TLS_CREDS_X509
is not supported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

CPU is an acronym and should be written in uppercase
when part of plain text and not refering to an element.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The filter purpose is to simulate isolated private VLAN.

The behavior can be achieved by limiting network traffic
to traffic between VM and gateway. Because there is no
concept of the PVLAN in the linux bridge.

The filter also contains parts from clean-traffic
to prevent VM from spoofing its IP and MAC address.

To use this filter the user just needs to set
the GATEWAY_MAC variable to gateway MAC address.
Signed-off-by: NAles Musil <amusil@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

The disk command line is tested elsewhere.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

RHEL-6/CentOS-6 is no longer supported, let's remove dependency on
libcgroup and code that enables/starts cgconfig service.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1602407Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Although the name of the element is not self-explanatory,
it's affecting only the vcpu threads.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 4d92d5 and 55ecda introduced the parameters but didn't update the docs.
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add a 'skipUpdateCaps' bool that we set for test_driver.c nodedevs
which will skip accessing host resources via virNodeDeviceUpdateCaps
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

$ git log --format=oneline --committer=kkoukiou | wc -l
3

Also set up the mailmap entry to avoid duplicates in the
generated authors file.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The original capabilities didn't include a patched kernel for spectre,
SPICE gl support and had xen support enabled which we already have
dropped.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

We were missing these for x86_64 arch, so this is just for completeness.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

ffs() was not correctly detected on mingw with previous gnulib rebase:

  https://lists.gnu.org/archive/html/bug-gnulib/2018-07/msg00061.html.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>