We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Similarly to the previous commit, rename .args files.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

AFAIK there aren't any cases where we will/should hit the old code
path for our supported qemu versions, so drop the old code.

Massive test suite churn follows
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

QEMU_CAPS_DEVICE is always enabled for qemu binaries we support.
Sync qemuxml2* to match, and regenerate all test output.

Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.

Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.

Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Back in

  commit bd6c46fa
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.

A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.

Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.

Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)

This is a better interface to choose accelerator than guessing whether
we should enable or disable kvm to get the right one.

Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.

This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.

Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.

Implement setting/getting per-device blkio weights in qemu,
using the cgroups blkio.weight_device tunable.

Implement blkio tunable XML configuration and parsing.
Reviewed-by: N"Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>

This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.

The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.

Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test

We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.

* src/domain_conf.c: handle formatting and parsing unix monitors

* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
  pty path searching from qemudFindCharDevicePTYs(), switch
  qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
  monitor

* tests/qemuxml2argvtest.c: switch to using a unix monitor

* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data

virExec will write out the pid of the daemonized process only. Use this
in the QEMU driver, rather than QEMU's pidfile, so we can catch errors we
might miss if the emulator bails early.

* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Adjust the
code that creates "actual" output, so that it too produces a
newline-terminated buffer.
* tests/qemuxml2argvdata/*.args: Append a newline to each, via:
for i in $(find|grep '\.args$'); do echo >> $i;done