F20/rawhide has support for this.

From: Peter Robinson <pbrobinson@gmail.com>

Since this package isn't provided by any stock RH based distro. The
upstream RPMs are called VirtualBox anyways.

Our configure.ac says:

    Not all versions of gnutls include -lgcrypt, and so we add
    it explicitly for the calls to gcry_control/check_version

Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.

* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: pull localization updates and regenerate the po

Commit 6ab6bc19 has introduced separate
daemon/driver packages for vbox. These should only be built for x86
architectures which is done hereby.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

https://www.gnu.org/licenses/gpl-howto.html states:

You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.

If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.

* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now the VirtualBox driver is a loadable module, it needs
to live in its own sub-RPM
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=963016 points out that
we don't use initscripts by default on Fedora any more.

* libvirt.spec.in (Requires): Better explanation of gettext.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed.  In response that problem, Fedora
packaging guidelines were recently updated.  This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups

* libvirt.spec.in (daemon): Follow updated Fedora guidelines.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 297c99a5 accidentally put a { where a ( belonged, causing make
rpm to fail.

It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:

$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name

for qemu system mode, and

$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name

for qemu session mode.

* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: pulled and merged a number of new localization updates

Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections.  This
appears to be the only offender.

* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.
Signed-off-by: NEric Blake <eblake@redhat.com>

Since commit b8a32e0e, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.

This is just a bare Easter Egg. Whenever a user runs virDomainScreenshot
over a domain in test driver, he'll get the Libvirt PNG logo in return.

- configure.ac docs/news.html.in libvirt.spec.in: updates for the release
- po/*.po*: fetch translation updates from Transifex and regenerate

- configure.ac docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: merged in transifex updates for fr,hi,pl,ja,uk,it and
  regenerated

When a changelog entry references an RPM macro, % needs to be escaped so
that it does not appear expanded in package changelog.

Fri Mar  4 2009 is incorrect since Mar 4 was Wednesday. Since
libvirt-0.6.1 was released on Mar 4 2009, we should change Fri to Wed.

The macro was made to help installing broken packages that did not use
DESTDIR correctly by overriding individual path variables (prefix,
sysconfdir, ...). Newer rpm provides fixed make_install macro that calls
make install with just the correct DESTDIR, however it is not available
everywhere (e.g., RHEL 5 does not have it). On the other hand the
make_install macro is simple and straightforward enough for us to use
its expansion directly.

* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations

Nested conditionals are hard to read if they are not indented.
We can't add arbitrary whitespace to everything in spec files,
but we CAN add spaces before %if and %define.  Use this trick,
plus a fancy sed script that rewrites a spec file into a C
file, so we can use cppi to keep our spec file nice.

For reference, the sed script converts code like:

|# RHEL-5 builds are client-only for s390, ppc
|%if 0%{?rhel} == 5
|    %ifnarch %{ix86} x86_64 ia64
|        %define client_only        1
|    %endif
|%endif

into the following for cppi:

|// # RHEL-5 builds are client-only for s390, ppc
|#if a // 0%{?rhel} == 5
|# if a // %{ix86} x86_64 ia64
|#  define client_only        1
|# endif
|#endif

and errors from 'make syntax-check' look like:
spec_indentation
cppi: mingw-libvirt.spec.in: line 130: not properly indented
maint.mk: incorrect preprocessor indentation

* libvirt.spec.in: Add some indentation to make it easier to follow
various conditionals.
* mingw-libvirt-spec.in: Likewise.
* cfg.mk (sc_spec_indentation): New syntax check to enforce it.

Added missing entries to makefile and spec.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3

On rhel5, libs of avahi are packaged into avahi instead of avahi-libs.
Actually, there is no avahi-libs package shipped with rhel5. This patch
fixes this by requiring avahi on rhel5.

The daemon-driver-{qemu,lxc} packages are only built if
%{with_driver_modules} is specified, so they do not need to
further test this condition.  Likewise, the daemon package
is only built if %{with_libvirtd} is specified, so it does
not need to further test this condition.

* libvirt.spec.in (daemon-driver-qemu, daemon-driver-lxc):
Unconditionally require libvirt-daemon-driver-network.
(daemon): Unconditionally include lock-driver files.

When building libvirt rpms on rhel5, I got the following error:

    File must begin with "/": rm
    File must begin with "/": -f
    File must begin with "/": $RPM_BUILD_ROOT/etc/sysctl.d/libvirtd
    Installed (but unpackaged) file(s) found:
   /etc/sysctl.d/libvirtd

It is triggerd by the %files list of libvirt daemon:

    %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
    %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
    %else
    rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
    %endif

After checking document of rpm spec file, I think it would be better
to move the file deleting line from %files list to %install script.

Bug introduced in commit a1fd56cb.

In a non-systemd environment the post and preun scripts of libvirt-client
fail, since the required files are in libvirt-daemon. Moved them to client.
Doing that I noticed %{_unitdir}/libvirt-guests.service was contained in
both libvirt-client and libvirt-daemon, which I don't think was intended.
Removed the extra copy from daemon.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl.  Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.

* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.

Unfortunately, rpm is stupid enough to bytycompile python scripts even
though they are located in /usr/share/doc/libvirt-python-*/examples and
it does so after %install phase is finished. Thus there's no way we
could remove those files from BUILDROOT. As a workaround, we may safely
remove the examples subdirectory completely without losing anything. The
python scripts that were installed there are also copied directly into
/usr/share/doc/libvirt-python-*/ by

    %doc python/tests/*.py

rule. And yes, the files are actually tests, not examples.

https://bugzilla.redhat.com/show_bug.cgi?id=888071

The virtlockd daemon maintains file locks on behalf of libvirtd
and any VMs it is running. These file locks must be held for as
long as any VM is running. If virtlockd itself ever quits, then
it is expected that a node would be fenced/rebooted. Thus to
allow for software upgrads on live systemd, virtlockd needs the
ability to re-exec() itself.

Upon receipt of SIGUSR1, virtlockd will save its current live
state out to a file /var/run/virtlockd-restart-exec.json
It then re-exec()'s itself with exactly the same argv as it
originally had, and loads the state file, reconstructing any
objects as appropriate.

The state file contains information about all locks held and
all network services and clients currently active. An example
state document is

 {
    "server": {
        "min_workers": 1,
        "max_workers": 20,
        "priority_workers": 0,
        "max_clients": 20,
        "keepaliveInterval": 4294967295,
        "keepaliveCount": 0,
        "keepaliveRequired": false,
        "services": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_client_max": 1,
                "socks": [
                    {
                        "fd": 6,
                        "errfd": -1,
                        "pid": 0,
                        "isClient": false
                    }
                ]
            }
        ],
        "clients": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 9,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1722,
                    "ownerId": 6,
                    "ownerName": "f18x86_64",
                    "ownerUUID": "97586ba9-df27-9459-c806-f016c8bbd224"
                }
            },
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 10,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1784,
                    "ownerId": 7,
                    "ownerName": "f16x86_64",
                    "ownerUUID": "7b8e5e42-b875-61e9-b981-91ad8fa46979"
                }
            }
        ]
    },
    "defaultLockspace": {
        "resources": [
            {
                "name": "/var/lib/libvirt/images/f16x86_64.raw",
                "path": "/var/lib/libvirt/images/f16x86_64.raw",
                "fd": 14,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/shared.img",
                "path": "/var/lib/libvirt/images/shared.img",
                "fd": 12,
                "lockHeld": true,
                "flags": 1,
                "owners": [
                    1722,
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/f18x86_64.img",
                "path": "/var/lib/libvirt/images/f18x86_64.img",
                "fd": 11,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1722
                ]
            }
        ]
    },
    "lockspaces": [

    ],
    "magic": "30199"
 }
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This enhancement virtlockd so that it can receive a pre-opened
UNIX domain socket from systemd at launch time, and adds the
systemd service/socket unit files

* daemon/libvirtd.service.in: Require virtlockd to be running
* libvirt.spec.in: Add virtlockd systemd files
* src/Makefile.am: Install systemd files
* src/locking/lock_daemon.c: Support socket activation
* src/locking/virtlockd.service.in, src/locking/virtlockd.socket.in:
  systemd unit files
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h:
  Add virNetServerServiceNewFD() method
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add virNetSocketNewListenFD
  method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate

 - Avoid risk of other libvirtd threads accidentally
   releasing fcntl() locks by opening + closing a file
   that is locked
 - Ensure locks can be preserved across libvirtd restarts.
   virtlockd will need to be able to re-exec itself while
   maintaining locks. This is simpler to achieve if its
   sole job is maintaining locks
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d

Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747

Based on a patch originally authored by Daniel De Graaf

  http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html

This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl.  Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.

https://bugzilla.redhat.com/show_bug.cgi?id=830201

In older Fedora, the spec file for libivrt depended on avahi, which
included avahi-daemon, which in turn depended on dbus.  But now that
avahi libs and avahi-daemon are (correctly) in separate pacakges,
and since we REALLY don't want a mandatory dependency on avahi-daemon,
and considering that our init scripts require the messagebus service
from dbus, we need to explicitly require dbus ourselves.

* libvirt.spec.in (Requires): Add dbus for libvirt-daemon.

Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.

domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>