Add the logical storage pool startup validation (xml2argv) tests.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

It's only pass as 0 or 1 and used as a bool, let's just use a bool
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Let's create helpers for each style of command line created. This
primarily is easier on the eyes rather than the large multi line
if-then-else-else clause used, but may also be useful if in the
future any particular pool needs to add to the command line based
on pool xml format.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Cover the case where @netauto would be used to create the command
line in virStorageBackendFileSystemMountCmd. Essentially when the
pool type is "netfs", but the "source.format" is empty, create the
command line properly.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Similar to qemuxml2argv and storagevolxml2argv, let's create some
tests to ensure that the XML generates a consistent command line.

Using the same list of pools as storagepoolxml2xmltest, start with
the file system tests (fs, netfs, netfs-cifs, netfs-gluster).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Move into storage_util for reuse by test harness
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Move virStorageBackendFileSystemMountCmd to storage_util so that
it can be used by the test harness.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Extract out the code that is used to create the MOUNT command
for starting the pool. We can use this for Storage Pool XML
to Argv testing to ensure code changes don't alter how a
storage pool is started.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1624223

There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:

a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).

Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev=  + -object
memory-backend-file".
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So far we have two arguments that we are passing to
qemuBuildMemoryBackendProps() and that are taken from domain
private data: @qemuCaps and @autoNodeset. In the next commit I
will use one more item from there. Therefore, instead of having
it as yet another argument to the function, pass pointer to the
private data object.

There is one change in qemuDomainAttachMemory() where previously
@autoNodeset was NULL but now is priv->autoNodeset (which may be
set). This is safe to do as @autoNodeset is advisory only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1624336

Add a check during virDomainDefCompatibleDevice whether the
domain supports cold/hotplug of a memory module even though
this duplicates the qemuDomainDefValidateMemoryHotplug check.

Without this check, the cold/hot plug would fail on the
subsequent mem_memory check (since it's 0). Adding a check
for max_memory > 0 would allow the subsequent hotplug check
to fail, but would cause coldplug to fail with the somewhat
opaque message "no free memory device slot available".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

If virDomainDefCompatibleDevice fails because there is insufficient
domain def->mem.max_memory, then let's also print out that value in
the error message.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.

This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It's fairly easy to forget to add a capability to the list of
capabilities for a negative test case which might yield (for us) very
unfortunate results. Therefore, introduce negative versions of
DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with
tests that expect a failure too.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Validation of domain devices is accomplished via a generic device
iterator which takes a callback, iterates over all kinds of supported
device types and invokes the callback on every single device. However,
there might be cases when we need to alter the behaviour of the
iteration (most notably skip or include a group of devices). Therefore,
this patch introduces iterator flags.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Since the code was never run, it would have been very hard to spot this
mistake, especially since the compiler can't really warn about it.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This commit includes a test case for multiple network definitions. It is
useful right now, but it will be more useful when the index used by LXC
version 3.X is implemented to support this new settings. The version 3.X
is using indexes to specify each network settings.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

This commit fixes a bug when you have multiple network settings defined.
Basically, if you set an IPv6 or IPv4 gateway, it carries on next
network settings. It is happening because the data is not being
initialized when a new network type is defined. So, the old data still
persists into the pointer. Another way to initialized the data was
introduced using memset() to avoid missing attributes from the struct.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Rename a variable to make it clear that it holds the client organization
rather than the server organization.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virt-pki-validate tool is extracting components in the x509
certificate Subject field. Unfortunately the regex it is is using is far
too strict, and so truncating valid data. It needs to consider ',' as a
field separator, and if that's not there take all data until the EOL.

With the broken regex:

$ echo "  Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+'
guestHyp

And with the fixed regex

$ echo "Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\([^,]*\).*+\1+'
guestHyp1ver
Reported-by: NKashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: NKashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Commit 255e0732 introduced a few graphics-related helpers. The problem
is that virDomainGraphicsNeedsAutoRenderNode returns true if it gets
NULL as a response from virDomainGraphicsNeedsAutoRenderNode. That's
okay for egl-headless because that one always needs a DRM render node,
the same is not true for SPICE though, and unless the XML specifies
<gl enable='yes'> for SPICE, there's no need for any renderer.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Disable external snapshot of a readonly disk for domains as
this operation is not very useful. Such a snapshot is not
possible for active domains but the error message from QEMU
is more cryptic:

     error: internal error: unable to execute QEMU command 'transaction':
                         Could not create file: Permission denied

This error at least makes the error more understandable for
active domains and disallows for inactive domains as well.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If domain is killed with `xl destroy`, libvirt will not notice it and
still report the domain as running. Also trying to destroy the domain
through libvirt will fail. The only way to recover from such a situation
is to restart libvirt daemon. The problem is that even though libxl
report LIBXL_EVENT_TYPE_DOMAIN_DEATH, libvirt ignore it as all the
domain cleanup is done in a function actually destroying the domain. If
destroy is done outside of libvirt, there is no place where it would be
handled.

Fix this by doing domain cleanup in LIBXL_EVENT_TYPE_DOMAIN_DEATH too.
To avoid doing it twice, add a ignoreDeathEvent flag
libxlDomainObjPrivate, set when the domain death is triggered by libvirt
itself.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Since domain was suspended before and on failed wakeup is destroyed,
send an event.
Also, add missing libxlDomainCleanup.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Commit 017dfa27 changed a few switch statements in the LXC code to
have all possible enum values, and in the process changed the switch
statement in virLXCControllerGetNICIndexes() to return an error status
for unsupported interface types, but it erroneously put type='direct'
on the list of unsupported types.

type='direct' (implemented with a macvlan interface) is supported on
LXC, but it's interface shouldn't be placed on the list of interfaces
given to CreateMachineWithNetwork() because the interface is put
inside the container, while CreateMachineWithNetwork() only wants to
know about the parent veths of veth pairs (the parent veth remains on
the host side, while the child veth is put into the container).

Resolves: https://bugzilla.redhat.com/1656463Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virLXCControllerGetNICIndexes() was deciding whether or not to add the
ifindex for an interface's ifname to the list of ifindexes sent to
CreateMachineWithNetwork based on the interface type stored in the
config. This would be incorrect in the case of <interface
type='network'> where the network was giving out macvlan interfaces
tied to a physical device (i.e. when the actual interface type was
"direct").

Instead of checking the setting of "net->type", we should be checking
the setting of virDomainNetGetActualType(net).

I don't think this caused any actual misbehavior, it was just
technically wrong.
Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The networkxml2firewalltest sets virCommand to dry run mode but doesn't
provide a callback to fill in stdout/stderr. As a result when the
firewall code queries rules it gets a NULL output and so never triggers
the callback to process output.

This trivial change just returns an empty string for the command output
in order to ensure the callback gets triggered. It has no effect right
now, but in future patches this will trigger greater test coverage.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Most of the iptables APIs share code for the add/delete paths, but a
couple were separated. Merge the remaining APIs to facilitate future
changes.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format

https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch

Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

It is currently possible to use <interface>s of type openvswitch
with the libxl driver in a non-standard way, e.g.

  <interface type='bridge'>
    <source bridge='ovsbr0'/>
    <mac address='00:16:3e:7a:35:ce'/>
    <script path='vif-openvswitch'/>
  </interface>

This patch adds support for openvswitch <interface>s specified
in typical libvirt config

  <interface type='bridge'>
    <source bridge='ovsbr0'/>
    <mac address='00:16:3e:7a:35:ce'/>
    <virtualport type='openvswitch'/>
  </interface>

VLAN tags and trunking are also supported using the extended
syntax for specifying an openvswitch bridge in libxl

   BRIDGE_NAME[.VLAN][:TRUNK:TRUNK]

See Xen's networking wiki for more details on openvswitch support

https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitchSigned-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 212dc928 made a generic qemuDomainGetIOThreadsMon which
would fail if the QEMU_CAPS_OBJECT_IOTHREAD didn't exist. Then
commit d1eac927 used that helper for the collection of all domain
stats. However, if the capability doesn't exist, then the entire
stats collection fails. Since the IOThread stats were meant to be
if available only, thus rather than failing if the capability
doesn't exist, let's just not collect the stats. Restore the caps
failure logic for qemuDomainGetIOThreadsLive.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

During qemuConnectGetAllDomainStats if qemuDomainGetStats causes
a failure, then when collecting more than one domain's worth of
statistics the loop in virDomainStatsRecordListFree would call
virDomainFree which would call virResetLastError effectively wiping
out the reason we failed leaving the caller with no idea why the
collection failed.

To fix this, let's Preserve the error and Restore it prior to return
so that a caller such as 'virsh domstats' doesn't get the generic
"error: An error occurred, but the cause is unknown".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We already have a way stricter check in the code which is doing the
snapshot so duplicating it in the parser does not make much sense. Also
gets rid of an ugly ternary operator.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are preparing a certain disk source passed in as '@src' so the
individual functions should use that rather than disk->src which
corresponds to the top level element of the chain only.

Without this change TLS and persistent reservations would not work for
backing images of a chain when using -blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function clears and frees the passed buffers on success, but not in
one case of failure. Modify the control flow that the args are always
consumed, record it in the docs and remove few pointless cleanup paths
in callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add markers for allowing test debugging if one of the steps fails
without setting a proper error.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1656014

An RNG device can consists of more devices than RND device
itself. For instance, in case of EGD there is a chardev that
connects to EGD daemon and feeds the qemu with random data. When
doing RNG device removal we have to remove the associated chardev
as well.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>