- 26 4月, 2013 7 次提交
-
-
由 Laine Stump 提交于
There will soon be other items related to pci hostdevs that need to be in the same part of the hostdevsubsys union as the pci address (which is currently a single member called "pci". This patch replaces the single member named pci with a struct named pci that contains a single member named "addr".
-
由 Laine Stump 提交于
QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is supported in the qemu binary. QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports the "bootindex" parameter; for some reason, the bootindex parameter wasn't included in early versions of vfio support (qemu 1.4) so we have to check for it separately from vfio itself.
-
由 Eric Blake 提交于
POSIX says that both basename() and dirname() may return static storage (aka they need not be thread-safe); and that they may but not must modify their input argument. Furthermore, <libgen.h> is not available on all platforms. For these reasons, you should never use these functions in a multi-threaded library. Gnulib instead recommends a way to avoid the portability nightmare: gnulib's "dirname.h" provides useful thread-safe counterparts. The obvious dir_name() and base_name() are GPL (because they malloc(), but call exit() on failure) so we can't use them; but the LGPL variants mdir_name() (malloc's or returns NULL) and last_component (always points into the incoming string without modifying it, differing from basename semantics only on corner cases like the empty string that we shouldn't be hitting in the first place) are already in use in libvirt. This finishes the swap over to the safe functions. * cfg.mk (sc_prohibit_libgen): New rule. * src/util/vircgroup.c: Fix offenders. * src/parallels/parallels_storage.c (parallelsPoolAddByDomain): Likewise. * src/parallels/parallels_network.c (parallelsGetBridgedNetInfo): Likewise. * src/node_device/node_device_udev.c (udevProcessSCSIHost) (udevProcessSCSIDevice): Likewise. * src/storage/storage_backend_disk.c (virStorageBackendDiskDeleteVol): Likewise. * src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink): Likewise. * src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false positive. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Christophe Fergeau 提交于
It was written VIR_DOMAIN_EVENT_ID_PMSuspend
-
由 Christophe Fergeau 提交于
The previous description was a bit confusing.
-
由 Eric Blake 提交于
Jim Fehlig reported on IRC that older gcc/glibc triggers this warning: cc1: warnings being treated as errors qemu/qemu_domain.c: In function 'qemuDomainDefFormatBuf': qemu/qemu_domain.c:1297: error: declaration of 'remove' shadows a global declaration [-Wshadow] /usr/include/stdio.h:157: error: shadowed declaration is here [-Wshadow] make[3]: *** [libvirt_driver_qemu_impl_la-qemu_domain.lo] Error 1 Fix it like we have done in the past (such as commit 2e6322a7). * src/qemu/qemu_domain.c (qemuDomainDefFormatBuf): Avoid shadowing a function name. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Ján Tomko 提交于
Use a pair of 'memballoon' tags instead of single 'watchdog' one. Add a few missing colons.
-
- 25 4月, 2013 18 次提交
-
-
由 Ján Tomko 提交于
Reject multiple controllers with the same index, except for USB controllers. Multi-function USB controllers can have the same index.
-
由 Bamvor Jian Zhang 提交于
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>
-
由 Martin Kletzander 提交于
When all usb controllers connected to the same bus have <master startport='x'/> specified, none of them have 'id=usb' assigned and thus qemu fails due to invalid masterport specification (we use 'usb' for that purpose). Adding a check that at least one of the controllers is specified without <master startport='x'/> and in case this happens, error out due to invalid configuration.
-
由 Michal Privoznik 提交于
After 9d6e56db the syntax-check was unhappy due to wrong whitespacing: src/qemu/qemu_command.c:1637: for ( ; a.slot < QEMU_PCI_ADDRESS_SLOT_LAST; a.slot++) { maint.mk: incorrect whitespace around brackets, see HACKING for rules make: *** [bracket-spacing-check] Error 1
-
由 Michal Privoznik 提交于
After 78d7c3c5 we are strdup()-ing path to qemu-bridge-helper. However, the check for its return value is missing. So it is possible we've ignored the OOM error silently.
-
由 Ján Tomko 提交于
Add a "dry run" address allocation to figure out how many bridges will be needed for all the devices without explicit addresses. Auto-add just enough bridges to put all the devices on, or up to the bridge with the largest specified index.
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
由 liguang 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Ján Tomko 提交于
Add new controller type 'pci' with models 'pci-root' and 'pci-bridge'.
-
由 Ján Tomko 提交于
Now we set the default disk driver name when parsing the qemu command line too, hence all the test changes. Assume format type is 'auto' when none is specified on qemu command line.
-
由 Osier Yang 提交于
Pushed under trivial rule.
-
由 Li Zhang 提交于
This patch is to add command line builder and parser for NVRAM device, and add test cases. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
-
由 Li Zhang 提交于
For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device. Users are allowed to specify spapr-vio devices'address. But NVRAM is not supported in libvirt. So this patch is to add NVRAM device to allow users to specify its address. In QEMU, NVRAM device's address is specified by "-global spapr-nvram.reg=xxxxx". In libvirt, XML file is defined as the following: <nvram> <address type='spapr-vio' reg='0x3000'/> </nvram> Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
-
由 Michal Privoznik 提交于
Currently, if there has been an error in building command line process after virtual interfaces has been created, the flow jumps to 'error' label, where virDomainConfNWFilterTeardown() is called. This may report an error as well, but should not overwrite the original cause why we jumped to 'error' label.
-
由 Peter Krempa 提交于
State what fields are used when generating SELinux labels from a baselabel.
-
由 Osier Yang 提交于
Like what we did for "disk", "filesystem" and "interface", this introduces sub-element <driver> for "controller", and put the "queues" into it.
-
由 Wido den Hollander 提交于
This for example prohibits you to use iotune for Ceph or Sheepdog devices. Signed-off-by: NWido den Hollander <wido@widodh.nl>
-
- 24 4月, 2013 15 次提交
-
-
由 Osier Yang 提交于
Instead of making a choice between the underscore and camelCase, this simply changes "num_queues" into "queues", which is also consistent with Michal's multiple queue support for interface.
-
由 Osier Yang 提交于
Instead of a silent warning, it's better to error out if the numa nodeset is out of range. Just like for numa node larger than NUMA_NUM_NODES.
-
由 Peter Krempa 提交于
Since cbe67ff9 virSecuritySELinuxGenNewContext reports good error messages. Fix callers that mask the errors by generic error message.
-
由 Peter Krempa 提交于
Improve error reporting and generating of SPICE command line arguments according to the need to enable TLS. If TLS is disabled, there's no need to pass the certificate dir to qemu. This patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=953126
-
由 Peter Krempa 提交于
With this patch, if the autoport attribute is used, the code will sensibly auto allocate the ports only if needed.
-
由 Daniel P. Berrange 提交于
Ensure that all drivers implementing public APIs use a naming convention for their implementation that matches the public API name. eg for the public API virDomainCreate make sure QEMU uses qemuDomainCreate and not qemuDomainStart Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
It will simplify later work if the sub-drivers have dedicated APIs / field names. ie virNetworkDriver should have virDrvNetworkOpen and virDrvNetworkClose methods Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The driver.h struct for node devices used an inconsistent naming scheme 'DeviceMonitor' instead of the more usual 'NodeDeviceDriver'. Fix this everywhere it has leaked out to. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The driver.h file has no consistent indentation usage across all the typedefs. Attempts to vertically align struct field members have also been inconsistently applied. Sanitize the whitespace used for typedefs & remove all vertical alignment from structs Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Ensure that the driver struct field names match the public API names. For an API virXXXX we must have a driver struct field xXXXX. ie strip the leading 'vir' and lowercase any leading uppercase letters. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Ensure that the virDrvXXX method names exactly match the public APIs virYYY method names. ie XXX == YYY. Add a test case to prevent any regressions. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
A number of the remote procedure names did not match the corresponding API names. For example, many lacked the word 'CONNECT', others re-arranged the names. Update the procedures so their names exactly match the API names. Then remove the special case handling of these APIs in the generator Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
There are many declared options in gendispatch.pl that were no longer used. Those which were used were obscure '-b', '-k' and '-d'. Switch to use --mode={debug|client|server}. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Peter Krempa 提交于
Later on this function will be used to do more sophisticated checks and determination if port allocation is needed.
-
由 Peter Krempa 提交于
Switch the function from a bunch of ifs to a switch statement with correct type and reflow some code. Also fix comment in enum describing possible graphics types
-