- 22 3月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
The postParse callback is the correct place to generate default values that should be present in offline XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 21 3月, 2016 1 次提交
-
-
由 Cristian Klein 提交于
Signed-off-by: NCristian Klein <cristiklein@gmail.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
If use of virtlogd is enabled, then use it for backing the character device log files too. This avoids the possibility of a guest denial of service by writing too much data to the log file.
-
- 09 3月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Allow pinning for inactive vcpus. The pinning mask will be automatically applied as we would apply the default mask in case of a cpu hotplug. Setting the scheduler settings for a vcpu has the same semantics. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1306556
-
由 Peter Krempa 提交于
Introduce a helper to check supported device and domain config and move the memory hotplug checks to it. The advantage of this approach is that by default all new features are considered unsupported by all hypervisors unless specifically changed rather than the previous approach where every hypervisor would need to declare that a given feature is unsupported.
-
- 08 3月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Yuri Chornoivan 提交于
-
- 01 3月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
Per-domain directories were introduced in order to be able to completely separate security labels for each domain (commit f1f68ca3). However when the domain name is long (let's say a ridiculous 110 characters), we cannot connect to the monitor socket because on length of UNIX socket address is limited. In order to get around this, let's shorten it in similar fashion and in order to avoid conflicts, throw in an ID there as well. Also save that into the status XML and load the old status XMLs properly (to clean up after older domains). That way we can change it in the future. The shortening can be seen in qemuxml2argv tests, for example in the hugepages-pages2 case. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 26 2月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
Commit f1a89a8b allowed parsing configs from /etc/libvirt without validating the emulator capabilities. Check for the presence of a machine type in the qemu driver's post parse function instead of crashing. https://bugzilla.redhat.com/show_bug.cgi?id=1267256
-
- 20 2月, 2016 1 次提交
-
-
由 Andrea Bolognani 提交于
GIC v2 is the default, but checking against that specific version when we want to know whether the default has been selected is potentially error prone; using an alias instead makes it safer.
-
- 19 2月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Ending a nested job is no different from ending any other (non-async) job, after all the code in qemuDomainBeginJobInternal does not handle them differently either. Thus we should call qemuDomainObjEndJob to stop nested jobs. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 17 2月, 2016 3 次提交
-
-
由 Erik Skultety 提交于
Our existing virHashForEach method iterates through all items disregarding the fact, that some of the iterators might have actually failed. Errors are usually dispatched through an error element in opaque data which then causes the original caller of virHashForEach to return -1. In that case, virHashForEach could return as soon as one of the iterators fail. This patch changes the iterator return type and adjusts all of its instances accordingly, so the actual refactor of virHashForEach method can be dealt with later. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 John Ferlan 提交于
Move function into qemu_domain.c.
-
由 John Ferlan 提交于
Move qemuDomainSupportsNicdev and qemuDomainSupportsNetdev into qemu_domain.c and expose from there. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 16 2月, 2016 2 次提交
-
-
由 Andrea Bolognani 提交于
GIC is always available to ARM virt machines, and the domain XML should reflect this fact.
-
由 Andrea Bolognani 提交于
When a domain is configured to use GIC but no version has been specified by the user, default to GIC v2.
-
- 11 2月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Extract out the qemuParseCommandLine{String|Pid} into their own separate module - taking with it all the various static functions. Causes a ripple effect with a few other modules to include the new qemu_parse_command.h. Narrowed down the list of #include's in the split out module to those that are necessary for build.
-
- 08 2月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Some callers will need to behave differently when the detection failed and when the VM crashed during the redetection. Return -2 if it crashed.
-
- 05 2月, 2016 2 次提交
-
-
由 Joao Martins 提交于
The virDomainSnapshotDefFormat calls into virDomainDefFormat, so should be providing a non-NULL virCapsPtr instance. On the qemu driver we change qemuDomainSnapshotWriteMetadata to also include caps since it calls virDomainSnapshotDefFormat. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
由 Daniel P. Berrange 提交于
The virDomainObjFormat and virDomainSaveStatus methods both call into virDomainDefFormat, so should be providing a non-NULL virCapsPtr instance. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 04 2月, 2016 1 次提交
-
-
由 Joao Martins 提交于
And use the newly added caps->host.netprefix (if it exists) for interface names that match the autogenerated target names. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 03 2月, 2016 2 次提交
-
-
由 Peter Krempa 提交于
Free the old vcpupids array in case when this function is called again during the run of the VM. It will be later reused in the vCPU hotplug code. The function now returns the number of detected VCPUs.
-
由 Peter Krempa 提交于
Future patches will tweak and reuse the function in different places so move it separately first.
-
- 27 1月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 12 1月, 2016 2 次提交
-
-
由 Laine Stump 提交于
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3 controller set to newly defined Q35 domains that don't have any USB controllers defined.
-
由 Michal Privoznik 提交于
While this is no functional change, whole channel definition is going to be needed very soon. Moreover, while touching this obey const correctness rule in qemuAgentOpen() - so far it was passed regular pointer to channel config even though the function is expected to not change pointee at all. Pass const pointer instead. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 1月, 2016 2 次提交
-
-
由 Martin Kletzander 提交于
Earlier commit 71408079 forgot to deal properly with status XMLs where we want the libvirt-internal paths to be kept in place and not cleared, otherwise we could end up copying a NULL string and segfaulting th daemon. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This way both Domain and Device PostParse functions can act based on the flags. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 09 1月, 2016 6 次提交
-
-
由 Cole Robinson 提交于
We weren't checking for failure of qemuCaps lookup
-
由 Cole Robinson 提交于
Rather than open coding calls. I can't see any reason not to
-
由 Cole Robinson 提交于
Rather than open coding calls. I can't see any reason not to
-
由 Cole Robinson 提交于
Should be a no-op
-
由 Jiri Denemark 提交于
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and memory_iteration is what QEMU reports in dirty-sync-count. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
The structure actually contains migration statistics rather than just the status as the name suggests. Renaming it as qemuMonitorMigrationStats removes the confusion. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 08 1月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
It was added by mistake before the 'If' by commit 71408079. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 07 1月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
If user defines a virtio channel with UNIX socket backend and doesn't care about the path for the socket (e.g. qemu-agent channel), we still generate it into the persistent XML. Moreover when then user renames the domain, due to its persistent socket path saved into the per-domain directory, it will not start. So let's forget about old generated paths and also stop putting them into the persistent definition. https://bugzilla.redhat.com/show_bug.cgi?id=1278068Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 17 12月, 2015 3 次提交
-
-
由 Andrea Bolognani 提交于
MemLock is already used in other modules and, while still an abbreviation, is not ambiguous.
-
由 Andrea Bolognani 提交于
When the function changes the memory lock limit for the first time, it will retrieve the current value and store it inside the virDomainObj for the domain. When the function is called again, if memory locking is no longer needed, it will be able to restore the memory locking limit to its original value.
-
由 Andrea Bolognani 提交于
This function detects whether a domain needs RLIMIT_MEMLOCK to be set, and if so, uses an appropriate value.
-