1. 14 8月, 2015 3 次提交
  2. 13 8月, 2015 9 次提交
    • J
      conf: Remove 'vmdef' from virDomainHostdevDefParseXML · 11d57147
      John Ferlan 提交于
      Since it's not used, let's remove it to avoid any future usage.
      Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
      11d57147
    • M
      qemu: Use numad information when getting pin information · 776924e3
      Martin Kletzander 提交于
      Pinning information returned for emulatorpin and vcpupin calls is being
      returned from our data without querying cgroups for some time.  However,
      not all the data were utilized.  When automatic placement is used the
      information is not returned for the calls mentioned above.  Since the
      numad hint in private data is properly saved/restored, we can safely use
      it to return true information.
      
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1162947Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      776924e3
    • M
      qemu: Keep numad hint after daemon restart · 8ce86722
      Martin Kletzander 提交于
      The numad hint stored in priv->autoNodeset is information that gets lost
      during daemon restart.  And because we would like to use that
      information in the future, we also need to save it in the status XML.
      For the sake of tests, we need to initialize nnumaCell_max to some
      value, so that the restoration doesn't fail in our test suite.  There is
      no need to fill in the actual numa cell data since the recalculating
      function virCapabilitiesGetCpusForNodemask() will not fail, it will just
      skip filling the data in the bitmap which we don't use in tests anyway.
      Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      8ce86722
    • M
      conf: Pass private data to Parse function of XML options · 7c8028cd
      Martin Kletzander 提交于
      This needs a reorder of XML option definitions.  It might come in handy
      one day.
      Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      7c8028cd
    • M
      qemu: Fix segfault when parsing private domain data · 92ddffdb
      Martin Kletzander 提交于
      When parsing private domain data, there are two paths that are flawed.
      They are both error paths, just from different parts of the function.
      One of them can call free() on an uninitialized pointer.  Initialization
      to NULL is enough here.  The other one is a bit trickier to explain, but
      as easy as the first one to fix.  We create capabilities, parse them and
      then assign them into the private data pointer inside the domain object.
      If, however, we get to fail from now on, the error path calls unrefs the
      capabilities and then, when the domain object is being cleaned,
      qemuDomainObjPrivateFree() tries to unref them as well.  That causes a
      segfault.  Settin the pointer to NULL upon successful addition to the
      private data is enough.
      Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      92ddffdb
    • J
      conf: Check for hostdev conflicts when assign default disk address · 1b08cc17
      John Ferlan 提交于
      https://bugzilla.redhat.com/show_bug.cgi?id=1210587  (completed)
      
      When generating the default drive address for a SCSI <disk> device,
      check the generated address to ensure it doesn't conflict with a SCSI
      <hostdev> address. The <disk> address generation algorithm uses the
      <target> "dev" name in order to determine which controller and unit
      in order to place the device. Since a SCSI <hostdev> device doesn't
      require a target device name, its placement on the guest SCSI address
      "could" conflict.  For instance, if a SCSI <hostdev> exists at
      controller=0 unit=0 and an attempt to hotplug 'sda' into the guest
      made, there would be a conflict if the <hostdev> is already using
      /dev/sda.
      1b08cc17
    • J
      conf: Create locals for virDomainDiskDefAssignAddress · d6ea4adb
      John Ferlan 提交于
      Create local controller/bus variables to be used by a future patch
      d6ea4adb
    • J
      conf: Add SCSI hostdev check for disk drive address already in use · 8d46386b
      John Ferlan 提交于
      https://bugzilla.redhat.com/show_bug.cgi?id=1210587  (partial)
      
      If a SCSI subsystem <hostdev> element address is provided, we need to
      make sure the address provided doesn't conflict with an existing or
      libvirt generated address for a SCSI <disk> element. We can handle
      this condition in device post processing since we're not generating an
      address based on some target name - rather it's either generated based
      on space or provided from the user. If the user provides one that conflicts,
      then we need to disallow the change.
      
      This will fix the issue where the domain XML provided an <address> for
      the <hostdev>, but not the <disk> element where the address provided
      ends up being the same address used for the <disk>. A <disk> address
      is generated using it's assigned <target> 'dev' name prior to the
      check/validation of the <hostdev> address value.
      8d46386b
    • F
      Drive hot-unplug: reliable parsing of HMP results · 69a3b0df
      Frank Schreuder 提交于
      Hot-unplugging a disk from a guest that supports hot-unplugging generates an error
      in the libvirt log when running QEMU with the "-msg timestamp=on" flag.
      
      2015-08-06 10:48:59.945+0000: 11662: error : qemuMonitorTextDriveDel:2594 :
      operation failed: deleting drive-virtio-disk4 drive failed:
      2015-08-06T10:48:59.945058Z Device 'drive-virtio-disk4' not found
      
      This error is caused because the HMP results are getting prefixed with a timestamp.
      Parsing the output is not reliable with STRPREFIX as the results can be prefixed with a timestamp.
      
      Using strstr ensures that parsing the output works whether the results are prefixed or not.
      
      Cc: Stefan Hajnoczi <stefanha@redhat.com>
      Cc: Daniel P. Berrange <berrange@redhat.com>
      Signed-off-by: NFrank Schreuder <fschreuder@transip.nl>
      69a3b0df
  3. 12 8月, 2015 10 次提交
    • L
      Revert "qemu: Allow to plug virtio-net-pci into PCIe slot" · d5e6d1cf
      Laine Stump 提交于
      This reverts commit ede34470, which
      was apparently written based on testing performed before commits
      1e15be1b and 9a12b6 were pushed upstream. Once those two patches are in
      place, commit ede34470 is redundant, and can even cause
      incorrect/unexpected behavior when auto-assigning addresses for
      virtio-net devices.
      d5e6d1cf
    • M
      cmdAttachInterface: Fully implement @floor support · 68b2405c
      Michal Privoznik 提交于
      In my previous commit d7f5c889 I tried to introduce support
      for inbound.floor. But the code change was incomplete. This is
      the change needed to fully enable the feature.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      68b2405c
    • M
      networkBandwidthGenericChecks: Drop useless check · f7fba69b
      Michal Privoznik 提交于
      There's a check right at the beginning of the function that
      shortcuts if the function was called over all NULL arguments.
      However, this was meant just as a fool-proof check so that we
      don't crash if function is used in a bad manner. Anyway, it makes
      Coverity unhappy as it then thinks any of the arguments could be
      NULL. Well, with the current state of the code it can't.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      f7fba69b
    • M
      networkBandwidthUpdate: Don't blindly dereference pointers · ef6b3b62
      Michal Privoznik 提交于
      It may happen that an interface don't have any bandwidth set and
      a new one is to be set. In that case, @ifaceBand will be NULL.
      This will cause troubles later in the code when deciding what to
      do.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      ef6b3b62
    • P
      virsh: Refactor parseRateStr to avoid false-positive uninitialized variable · 73ca6f98
      Peter Krempa 提交于
      Commit 6983d6d2 tried to improve parseRateStr but broke the build
      instead for compilers that were not able to properly introspect the for
      loop indexed by the enum resulting into the following error:
      
      virsh-domain.c: In function 'parseRateStr':
      virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
                   vshError(ctl, _("malformed %s field"), field_name);
                   ^
      virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
               if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
                   ^
      Rather than trying to fix the code, refactor the function again by
      reusing virStringSplit.
      73ca6f98
    • C
      domain: Fix crash if trying to live update disk <serial> · c7790408
      Cole Robinson 提交于
      If you pass <disk><serial> XML to UpdateDevice, and the original device
      didn't have a <serial> block, libvirtd crashes trying to read the original
      NULL serial string.
      
      Use _NULLABLE string comparisons to avoid the crash. A couple other
      properties needed the change too.
      c7790408
    • L
      qemu: fix qemuDomainSupportsPCI() for ARM machines of "virt" machinetype · 9bd16ad3
      Laine Stump 提交于
      Commit e8d55172 updated the domain post-parse to automatically add
      pcie-root et al for certain ARM "virt" machinetypes, but didn't update
      the function qemuDomainSupportsPCI() which is called later on when we
      are auto-assigning PCI addresses and default settings for the PCI
      controller <model> and <target> attributes. The result was that PCI
      addresses weren't assigned, and the controllers didn't have their
      attribute default values set, leading to an error when the domain was
      started, e.g.:
      
        internal error: autogenerated dmi-to-pci-bridge options not set
      
      This patch adds the same check made in the earlier patch to
      qemuDomainSupportsPCI(), so that PCI address auto-assignment and
      target/model default values will be set.
      9bd16ad3
    • G
      virNetSocketCheckProtocols: handle EAI_NONAME as IPv6 unavailable · fbb27088
      Guido Günther 提交于
      When running the test suite using "unshare -n" we might have IPv6 but no
      configured addresses. Due to AI_ADDRCONFIG getaddrinfo then fails with
      EAI_NONAME which we should then treat as IPv6 unavailable.
      fbb27088
    • L
      util: don't overwrite stack when getting ethtool gfeatures · bfaaa2b6
      Laine Stump 提交于
      This fixes the crash described here:
      
       https://www.redhat.com/archives/libvir-list/2015-August/msg00162.html
      
      In short, we were calling ioctl(SIOCETHTOOL) pointing to a too-short
      object that was a local on the stack, resulting in the memory past the
      end of the object being overwritten. This was because the struct used
      by the ETHTOOL_GFEATURES command of SIOCETHTOOL ends with a 0-length
      array, but we were telling ethtool that it could use 2 elements on the
      array.
      
      The fix is to allocate the necessary memory with VIR_ALLOC_VAR(),
      including the extra length needed for a 2 element array at the end.
      bfaaa2b6
    • A
      cpu: Fix segfault in the ppc64 driver · 133c25c8
      Andrea Bolognani 提交于
      Commit adb865df introduced some changes in ppc64DriverNodeData()
      that cause libvirtd to crash on startup unless this patch is
      applied as well.
      133c25c8
  4. 11 8月, 2015 18 次提交
    • M
      qemu: Implement VIR_DOMAIN_BANDWIDTH_IN_FLOOR · b044e325
      Michal Privoznik 提交于
      Well, there are just two places that needs adjustment:
      
      qemuDomainGetInterfaceParameters - to report the @floor
      qemuDomainSetInterfaceParameters - now that the function has been
      fixed, we can allow updating @floor too.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      b044e325
    • M
      virsh: Implement VIR_DOMAIN_BANDWIDTH_IN_FLOOR · d7f5c889
      Michal Privoznik 提交于
      We have a function parseRateStr() that parses --inbound and
      --outbound arguments to both attach-interface and domiftune.
      Now that we have all virTypedParams macros needed for QoS,
      lets parse even floor attribute. The extended format for the
      arguments looks like this then:
      
        --inbound average[,peak[,burst[,floor]]]
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      d7f5c889
    • M
      Introduce VIR_DOMAIN_BANDWIDTH_IN_FLOOR · 55d0e859
      Michal Privoznik 提交于
      This macro represents the single missing field we don't expose
      yet within QoS: inbound.floor.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      55d0e859
    • M
      virsh: Rework parseRateStr · 6983d6d2
      Michal Privoznik 提交于
      The function is used to parse a tuple delimited by commas into
      virNetDevBandwidth structure. So far only three out of fore
      fields are supported: average, peak and burst. The single missing
      field is floor. Well, the parsing works, but I think we can do
      better. Especially when we will need to parse floor too in very
      close future.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      6983d6d2
    • M
      qemuDomainSetInterfaceParameters: Use new functions to update bandwidth · 5ee6d243
      Michal Privoznik 提交于
      As sketched in previous commits, imagine the following scenario:
      
        virsh # domiftune gentoo vnet0
        inbound.average: 100
        inbound.peak   : 0
        inbound.burst  : 0
        outbound.average: 100
        outbound.peak  : 0
        outbound.burst : 0
      
        virsh # domiftune gentoo vnet0 --inbound 0
      
        virsh # shutdown gentoo
        Domain gentoo is being shutdown
      
        virsh # list --all
        error: Failed to list domains
        error: Cannot recv data: Connection reset by peer
      
        Program received signal SIGSEGV, Segmentation fault.
        0x00007fffe80ea221 in networkUnplugBandwidth (net=0x7fff9400c1a0, iface=0x7fff940ea3e0) at network/bridge_driver.c:4881
        4881            net->floor_sum -= ifaceBand->in->floor;
      
      This is rather unfortunate. We should not SIGSEGV here. The
      problem is, that while in the second step the inbound QoS was
      cleared out, the network part of it was not updated (moreover, we
      don't report that vnet0 had inbound.floor set). Internal
      structure therefore still had some fragments left (e.g.
      class_id). So when qemuProcessStop() started to clean up the
      environment it got to networkUnplugBandwidth(). Here, class_id is
      set therefore function assumes that there is an inbound QoS. This
      actually is a fair assumption to make, there's no need for a
      special QoS box in network's QoS when there's no QoS to set.
      Anyway, the problem is not the networkUnplugBandwidth() rather
      than qemuDomainSetInterfaceParameters() which completely forgot
      about QoS being disperse (some parts are set directly on
      interface itself, some on bridge the interface is plugged into).
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      5ee6d243
    • M
      bridge_driver: Introduce networkBandwidthUpdate · 812932be
      Michal Privoznik 提交于
      So, if a domain vNIC's bandwidth has been successfully set, it's
      possible that because @floor is set on network's bridge, this
      part may need updating too. And that's exactly what this function
      does. While the previous commit introduced a function to check if
      @floor can be satisfied, this does all the hard work. In general,
      there may be three, well four possibilities:
      
        1) No change in @floor value (either it remain unset, or its
        value hasn't changed)
      
        2) The @floor value has changed from a non-zero to a non-zero
        value
      
        3) New @floor is to be set
      
        4) Old @floor must be cleared out
      
      The difference between 2), 3) and 4) is, that while in 2) the QoS
      tree on the network's bridge already has a special class for the
      vNIC, in 3) the class must be created from scratch. In 4) it must
      be removed. Fortunately, we have helpers for all three
      interesting cases.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      812932be
    • M
      bridge_driver: Introduce networkBandwidthChangeAllowed · 41a1531d
      Michal Privoznik 提交于
      When a domain vNIC's bandwidth is to be changed (at runtime) it is
      possible that guaranteed minimal bandwidth (@floor) will change too.
      Well, so far it is, because we still don't have an implementation that
      allows setting it dynamically, so it's effectively erased on:
      
          #virsh domiftune $dom vnet0 --inbound 0
      
      However, that's slightly unfortunate. We do some checks on domain
      startup to see if @floor can be guaranteed. We ought do the same if
      QoS is changed at runtime.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      41a1531d
    • M
      virNetDevBandwidthUpdateRate: turn class_id into integer · 45090449
      Michal Privoznik 提交于
      This is no functional change. It's just that later in the series we
      will need to pass class_id as an integer.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      45090449
    • M
      virNetDevParseMcast: Avoid magic constant · 327bc16a
      Michal Privoznik 提交于
      There is no guarantee that an enum start it mapped onto a value
      of zero. However, we are guaranteed that enum items are
      consecutive integers. Moreover, it's a pity to define an enum to
      avoid using magical constants but then using them anyway.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      327bc16a
    • M
      conf: Don't try formating non-existing addresses · 1f24c149
      Martin Kletzander 提交于
      Commit a6f9af82 added checking for address colisions between
      starting and ending addresses of forwarding addresses, but forgot that
      there might be no addresses set at all.
      Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      1f24c149
    • A
      tests: Add a bunch of cpu test case for ppc64 · 818e68c5
      Andrea Bolognani 提交于
      The test cases cover the cpuCompare(), cpuBaseline() and
      cpuNodeData() implementation.
      818e68c5
    • A
      tests: Re-enable ppc64 cpu tests · 049df975
      Andrea Bolognani 提交于
      Now that all the changes have been implemented we can run the
      test cases once again, after updating them to reflect the new
      behaviour.
      049df975
    • A
      cpu: Forbid model fallback in the ppc64 driver · 344d1675
      Andrea Bolognani 提交于
      Unlike what happens on x86, on ppc64 you can't mix and match CPU
      features to obtain the guest CPU you want regardless of the host
      CPU, so the concept of model fallback doesn't apply.
      
      Make sure CPU definitions emitted by the driver, eg. as output of
      the cpuBaseline() and cpuUpdate() calls, reflect this fact.
      344d1675
    • A
      cpu: Implement backwards compatibility in the ppc64 driver · dee2247a
      Andrea Bolognani 提交于
      All previously recognized CPU models (POWER7_v2.1, POWER7_v2.3,
      POWER7+_v2.1 and POWER8_v1.0) are internally converted to the
      corrisponding generation name so that existing guests don't stop
      working.
      dee2247a
    • A
      cpu: Add POWER8NVL information to CPU map XML · 36300d2b
      Andrea Bolognani 提交于
      This is yet another variation of POWER8. The PVR information comes
      from arch/powerpc/kernel/cputable.c in the Linux kernel tree.
      36300d2b
    • A
      cpu: Parse and use PVR masks in the ppc64 driver · 5d0aa93c
      Andrea Bolognani 提交于
      Instead of relying on a hard-coded mask value, read it from the CPU
      map XML and use it when looking up models by PVR.
      5d0aa93c
    • A
      cpu: Simplify ppc64 part of CPU map XML · d87359af
      Andrea Bolognani 提交于
      Use multiple PVRs per CPU model to reduce the number of models we
      need to keep track of.
      
      Remove specific CPU models (eg. POWER7+_v2.1): the corresponding
      generic CPU model (eg. POWER7) should be used instead to ensure
      the guest can be booted on any compatible host.
      
      Get rid of all the entries that did not match any of the CPU
      models supported by QEMU, like power8 and power8e.
      
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977
      d87359af
    • A
      cpu: Support multiple PVRs in the ppc64 driver · 59fcc961
      Andrea Bolognani 提交于
      This will allow us to perform PVR matching more broadly, eg. consider
      both POWER8 and POWER8E CPUs to be the same even though they have
      different PVR values.
      59fcc961